panthera

threedee

A handy little container with a threaded capI personally use mine for my medication for ease of use when I&#39;m out, or as a backup in case I forget them at home, its came in perfect and handy when I&#39;ve been away from home.Of course you can store and carry whatever you likeIt can be resized, just make sure to resize both parts the same&nbsp;

Keychain Container Pill Storage Bottle

babe 💘

GamerForge

I've put all the pieces together to print an authentic “The Madalorian Cosplay” with quick instructions. Please pay attention to the size of the parts! scale the parts to your size 12.09.2023 - added new model - The Mandalorian Cardridge holder / Bullet holder (look at “Accessories”) Mando Helmet sizes<ul><li>Large: 100% original size<ul><li>Inside dimensions 24x20cm - Head circumference up to max 59cm</li><li>Six-piece with sparing</li></ul></li><li>Medium: 91% original size<ul><li>Inner dimensions 22x18cm - Head circumference up to max 54cm</li><li>Three-piece without support structure in the middle</li></ul></li><li>Small: 84% original sizeinner dimensions 20x16cm - head circumference up to max 52cmOne-piece without support structure in the middle </li></ul><figure class="media"></figure>Armor Print all Parts (damaged or undamaged) and all Accessories. Jetpack Print all Parts. Arms decide which version of the arms you want and print all the parts. Legs Print the legs 2 times. Blaster Print all Blaster Parts Credits Helmet:<a href="https://www.printables.com/de/model/104677-how-to-print-the-mandalorian-helmet-size-s-m-l-and" rel="nofollow">https://www.printables.com/de/model/104677-how-to-print-the-mandalorian-helmet-size-s-m-l-and</a> Armor:<a href="https://www.thingiverse.com/thing:4074037" rel="nofollow">https://www.thingiverse.com/thing:4074037</a> Accessories: - Belt:<a href="https://www.thingiverse.com/thing:3940791" rel="nofollow">https://www.thingiverse.com/thing:3940791</a> - Mine Holder:<a href="https://www.thingiverse.com/thing:3950869" rel="nofollow">https://www.thingiverse.com/thing:3950869</a> - Mines:<a href="https://www.thingiverse.com/thing:3577447/files" rel="nofollow">https://www.thingiverse.com/thing:3577447/files</a> - Sling Rifle Clip:<a href="https://www.thingiverse.com/thing:3940845" rel="nofollow">https://www.thingiverse.com/thing:3940845</a> - Right Leg/Shin Armor:<a href="https://www.thingiverse.com/thing:4050910" rel="nofollow">https://www.thingiverse.com/thing:4050910</a> Jetpack:<a href="https://www.thingiverse.com/thing:4074037" rel="nofollow">https://www.thingiverse.com/thing:4074037</a> Arms:<a href="https://www.thingiverse.com/thing:4037828" rel="nofollow">https://www.thingiverse.com/thing:4037828</a> Arms modified:<a href="https://www.thingiverse.com/thing:4074037" rel="nofollow">https://www.thingiverse.com/thing:4074037</a> Legs:<a href="https://www.thingiverse.com/thing:2619639" rel="nofollow">https://www.thingiverse.com/thing:2619639</a> Blaster: <a href="https://www.printables.com/de/model/45919-mandalorian-pistol" rel="nofollow">https://www.printables.com/de/model/45919-mandalorian-pistol</a>

Mandalorian Full Costume/Cosplay (Helmet, Armor, Jetpack, Blaster etc.)

Mando Cosplay

RileyDesigns

This is dragon scale chainmail, a print in place multi-use flexible fabric. This chainmail can be used from anything from a satisfying fidget toy to an integral part of you cosplay or costumes. This model is strong so feel free to play till your hearts content or weather it to deataile a costume. This model can be colored via bambu studio. For best results use a small layer height, but .2 works just fine. I have included multiple models in the raw model files including a single piece so you can make your own custom shapes. Everything but the single chainmail link stl file is reduced so it slices fast so beware of using high resolution shapes with this model (before this model was redeuced at a 20x20 chainmail it was over 34 million triangles). If there are any shapes you would specifically like Id be happy to make them and upload it as a profile.&nbsp;MeasurementsEach side of the hexagon is 7mm in lengthDistance from center to center to link the chainmail together should be 13mm horizontally, and to get the second row of chainmail is over 6.5mm up 11mm&nbsp;Commercial licenseI have a commercial license available at <a target="_blank" href="https://cults3d.com/en/3d-model/fashion/dragon-scale-chainmail-commercial-use" rel="nofollow noopener">https://cults3d.com/en/3d-model/fashion/dragon-scale-chainmail-commercial-use</a>feel free to send me a message on Makerworld to confirm this is the right model. Or send me a DM for a comercial lisence if you dont want to go through cults3d :)

Dragon Scale Hexagonal Chainmail - Print in place

cosplay

FlorinV

<ul><li>100mm x 80mm dimensions</li><li>Simple to print. Looks great in Marble PLA.</li><li>Optional adjustable screwing feet for over the sink lip positioning.</li><li>The interior is designed with 4 slopes combined to direct the water from all 4 corners to the middle dripping hole.</li><li>Front text “KEEP IT CLEAN” …. in case we forget :D</li><li>If you want a stronger voronoi grille, you can scale up only the Z axis for the voronoi grille. (non uniform scale)</li><li>Update 10.01.2024: I've added another profile with a small “connector”, in case you want more than one drip tray. If you print 2 or more drip trays, you can print this small connector to hold them together.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/263481/2024-01-10_93944baa47878.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/263481/2023-12-13_df96d9e597275.gif"></figure>

Adaptable Sponge drip tray

stuff

SabreDesign

Midcentury planter with legs, available in two sizes with opening of 114 mm and 71 mm for a smaller pot. Leg section has a fairly tight fit so does not really need superglue but you can also glue it if desired.&nbsp;If you want to support me or get a commercial license you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/836490/2024-03-30_8c84c5e27142d.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/836490/2024-03-30_a24eef8052683.png"></figure>

babe 💘

Mando Cosplay

cosplay

stuff

plant pots

printer mods