panhans

DrJones

Easily start a siphon: Just shake! Sized for a 12mm (1/2 &#34;) garden hose.&nbsp;If you want to empty a barrel etc using a siphon but find it uneasy to start the siphon - this is an easy way to do so. This shaker siphon is a actually just a valve. By shaking it down into the water (or other liquid), that water can easily flow in, but when you pull up again, the water is trapped and comes up, too. By shaking up and down, the valve and the water&#39;s inertia pump enough water up to start the siphon effect.&nbsp;I tried to design it to have low flow resistance and not to be prone to catch debris.&nbsp;Added a version with gardena adapter (check “raw files”).&nbsp;Printing: It worked without a brim for me, but if it comes loose while printing, try adding a brim.

shaker siphon for garden hose

Garden

3DMDesign

This adorable bubblegum-pink creature with oversized, glossy eyes and perky ears is sure to capture your heart. His tiny teeth and playful pose make it an irresistible addition to any collection.

Bubblegum Monster

Monster

Gamed

vcommandeur

Save money, save the environment.With these simpel fan clips, I made my radiator fan from ten 80 mm fans connected in series with y-splitters (edge thickness of fan for clip is 4 mm). The fans are controlled by a temperature switch and a simple LED dimmer connected to a DC12V adapter (2A). In the clips exactly fit two magnets of 10mm diameter and 2mm thick. No glue needed.Required per fan: - 2x clip - 2x magnet 10x2mmPrinting in .28 resolution is sufficient. No supports needed. Use ABS or other filament that is heat resistant.

Radiator ventilator clip magnetic for 80mm fans

Radiator

Cayden3D

This custom-designed flosser dispenser is right at home in any bathroom, kitchen, or dining room- keep those plackers handy! Print in PETG or ABS to keep one in the car!&nbsp;Keep the germs out and never be without a flosser with this awesome little dispenser! My design holds 22 Plackers brand flossers and is easily refillable via the self-securing lid. &nbsp;You’ll love using the compliant dispensing mechanism, and you can always keep an eye on how many flossers are left.&nbsp;**Note** specifically sized for: -Plackers Micro Mint -Plackers Twin-Line Flossers. -Plackers EcoChoice

Flosser Dispenser for Plackers

Organizer

DatumCAD

<figure class="image image_resized image-style-side" style="width:38.09%;"><img src="https://makerworld.bblmw.com/makerworld/draft/805986/2024-03-20_394e64d5f2285.gif"><figcaption>GIF - Exploded View Animation</figcaption></figure>An adjustable handle that can be attached to any existing standard full-size hacksaw blade. This compact tool allows you use the blade in tight / hard to reach areas, and where a full-frame would foul with the material.&nbsp;I also have various other models for various blade types &amp; are yet more compact in size. Feel free to check those out too:<ul><li><a target="_blank" href="https://makerworld.com/en/models/386059#profileId-286421" rel="nofollow noopener">Junior hacksaw handle</a></li><li><a target="_blank" href="https://makerworld.com/en/models/400706#profileId-302219" rel="nofollow noopener">Jigsaw blade handle</a></li><li><a target="_blank" href="https://makerworld.com/en/models/410315#profileId-312254" rel="nofollow noopener">Reciprocating saw blade handle</a></li></ul>All designs incorporate opposing dual thumb CAM levers with positive snap shut to ensure the blade does not slip once held &amp; it is as safe as possible to use. This took a lot of prototyping &amp; testing but works great. It is quick &amp; toolless to adjust….and satisfying to use as a result.&nbsp;Most standard ‘full size’ hacksaw blades are 0.5&#34; (12.7mm) wide by approximately 0.6 - 0.7mm thick, if you want to double check yours for compatibility as anything this wide (or smaller) should fit fine.&nbsp;Note: The CAM levers have been deliberately designed to be tight fitting to avoid the blade slipping in the tool. That said, if after the first few engagements &amp; releases of the thumb lock it has not eased to a point you are comfortable using it, then you could try printing the smaller CAM levers from the Print profile provided. Additionally, if you have a thinner than standard blade or a loose fit, then you may want to print the Larger CAM Levers profile.&nbsp;If you like this model then you may also like my sliding <a target="_blank" href="https://makerworld.com/en/models/213504#profileId-233069" rel="nofollow noopener">steel ruler limit block</a> which also incorporates a CAM locking mechanism. Or any of my other <a target="_blank" href="https://makerworld.com/en/@DatumCAD" rel="nofollow noopener">DatumCAD</a> designs :)&nbsp;Fasteners: For this model you will need 2x M3 x 30mm fixings which act purely as strong pivot axles to the cam lever.&nbsp;Assembly:<ul><li>Insert the CAM lever into the Housing. Tip: Insert with the level in the closed / horizontal position as the holes will then line up easier.</li><li>Insert M3 Fixings. Tip: The fixings should pass though the handle housing counterbore hole &amp; the CAM lever relatively unhindered, but then will need lightly screwing into far handle hole which has been deliberately sized so as to require some tightening without to much force. (Remember these are just acting as pivot points, no need to tighten down hard, but equally the fixing should not want to fall back out either.)</li><li>Insert Blade. Top Tip: Open both of the CAM levers up around 180degrees from the closed position, so the CAMs don&#39;t grab the blade upon insertion. Once you have in the desired location, simply lock both CAMs fully down.</li><li>Enjoy - your adjustable hacksaw handle is now ready to use.</li></ul>I love designing for 3D printing, please take a look at all my other models which are all free (and will always continue to be)… if you value any of the downloads enough &amp; are able to support me, then please consider buying me a coffee to keep me going! <a target="_blank" href="https://www.buymeacoffee.com/DatumCAD" rel="nofollow noopener">www.buymeacoffee.com/DatumCAD</a><figure class="image image_resized" style="width:55.06%;"><img src="https://makerworld.bblmw.com/makerworld/draft/805986/2024-03-21_6e3d9fd6f9586.jpg"><figcaption><a target="_blank" href="https://makerworld.com/en/models/386059#profileId-286421" rel="nofollow noopener">Link to Junior version</a></figcaption></figure><figure class="image image_resized" style="width:55.01%;"><img src="https://makerworld.bblmw.com/makerworld/draft/805986/2024-03-20_278390d1fc3bb.png"></figure>

Garden

Monster

Gamed

Radiator

Organizer

Tools

Holder

Upgrades