pablopicasso2006

Mr.P.

Ich habe einen Bahnhof entworfen, der vollständig ohne Support gedruckt werden kann. Er besteht aus mehreren Teilen, die zusammengesteckt werden können. Ihr könnt zwischen zwei Fahrplan-Versionen wählen, wobei eine mit Hueforge erstellt wurde. Das Beschriftungsschild wurde direkt im Bambu Studio beschriftet und kann nach Belieben geändert werden. Sowohl das Schild als auch der Fahrplan können jederzeit ausgetauscht werden. Ich hoffe, sowohl ihr als auch eure Kinder haben viel Freude daran!&nbsp;Beschriftung ändern&nbsp;Um die Beschriftung zu ändern, klicken Sie im Bambu Studio auf das Element, dann mit der rechten Maustaste auf text_shape und wählen Sie 'Ändern'.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/760624/2024-03-26_1265be891aefd.png" alt="Ein Bild, das Text, Software, Schrift, Computersymbol enthält.Automatisch generierte Beschreibung">&nbsp;Druck Reihenfolge:Die erste Platte habe ich mit dunkelgrau, Marmor, Weiß und Gelb gedruckt.Die zweite Platte wurde ebenfalls mit Marmor gedruckt.Bei der dritten Platte habe ich gelb und dunkelgrau gegen zwei braun Töne getauscht.Die vierte und fünfte Platte wurde mit rot/blau/grün und weiß gefertigt.Bei der letzten Platte habe ich rot und grün durch schwarz und Silber (Silk) gedruckt.&nbsp;Zusammenbau:Alle Teile lassen sich relativ einfach zusammenstecken, beim Türrahmen ist zu beachten das er zuerst über die Stufen geschoben werden muss.&nbsp;&nbsp;&nbsp;I have designed a train station that can be fully printed without supports. It consists of multiple parts that can be assembled together. You can choose between two timetable versions, with one created using Hueforge. The signage was directly labeled in Bambu Studio and can be changed as desired. Both the sign and the timetable can be replaced at any time. I hope you and your children have a lot of fun with it!&nbsp;Changing the Label:To change the label, click on the part in Bambu Studio, then right-click on text_shape and select “change”.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/760624/2024-03-26_0cd577309ec2e.png" alt="Ein Bild, das Text, Software, Schrift, Computersymbol enthält.Automatisch generierte Beschreibung">&nbsp;Printing Sequence:The first plate was printed using dark gray, marble, white, and yellow.The second plate was also printed using marble.For the third plate, yellow and dark gray were replaced with two shades of brown.The fourth and fifth plates were made with red/blue/green and white.For the last plate, red and green were replaced with black and silver (silk).&nbsp;Assembly: All parts can be relatively easily assembled. When assembling the door frame, it's important to note that it should be slid over the steps first.&nbsp;

Train Station 

Brio Compatible Tracks & Toys

8BitTitan

PLEASE READ CAREFULLY, thanks!&nbsp;This is a remix, tune, cut and recolor of the sliding model from <a href="/en/@RTX_Nitrox" rel="nofollow">RTX_Nitrox</a>.The solid model WITHOUT any moving parts is here: <a target="_blank" href="https://makerworld.com/en/models/480816#profileId-392470" rel="nofollow noopener">https://makerworld.com/en/models/480816#profileId-392470</a>This model features a moving slide and trigger but DOES NOT SHOOT.&nbsp;IMPORTANT! The RED you use is critical. If you use a red with high translucency, it won&#39;t look as good (ie. Kingroon). For the other colors, you may want to opt for silver or light gray and similarly a dark gray or black.&nbsp;All the profiles are designed to print slowly for better quality and with a decent weight for prop feel. If you want to speed it up, by all means, but the quality will take a dive. All models have been specifically tuned for speed and specific parts have ironing, some parts have been slightly shaved for better fitment. If you download the model to tweak it yourself, please take care to note the “default” settings I&#39;ve put so you can test and revert if needed.&nbsp;<ul><li>SPLIT: The BEST quality version. The pieces are individually plated with adaptive layer height, tuned support settings, etc.</li><li>A1 MINI: This barely fits on the plate but it works. Again, designed to print slow. If you can stand it, go with “silent” mode for best effect.</li></ul>For the SPLIT profile, you have an option to print the receiver (the part you hold) as split and glue, or as a single piece. It&#39;s up to you which one to choose… both will work equally well. Just choose one of the two plates. The A1 MINI profile does not have a single piece option as it just doesn&#39;t want to come out very well on that printer.&nbsp;GLUE and a RUBBER BAND is required for assembly.For assembly tips: <a target="_blank" href="https://makerworld.com/en/models/472639#profileId-382515" rel="nofollow noopener">https://makerworld.com/en/models/472639#profileId-382515</a> &nbsp;As always, please rate and comment for feedback. Enjoy!

Glocktendo with Trigger and Slide Action

Toy Weapons

Ceije1010

First time uploading a model to Maker World. This is my take on a Brick figure Helldiver. I think I have it all sized right and I did a test print and everything came out good. The chest armor I glue to the torso. The pouch is made to slide into the grooves of the armor. Chest armor, Cape, and Pouches geometry allows for a bit easier painting with an AMS. The Helmet can probably be simplified but I was trying to maintain the detail for my own print. &nbsp;Thanks

Helldiver Brick Figure

Statues, Figures, and Busts

asdfghjklö

Ironing test for ironing speeds from 15 to 40mm/s and flow from 10 to 50%&nbsp;This is a smaller version for smaller surfaces and/or a faster faster guess. If you are searching for a more accurate print for larger surfaces,<a target="_blank" href="https://makerworld.com/en/models/398777" rel="nofollow noopener"> my other model </a>is probably better for you.<h3>Instructions</h3><ul><li>on bambu mobile: select your printer, plate and filament(profile) and just hit print</li><li>on bambu studio: same as above, but if you need to switch your printer, make sure you enable “Advance” in the “Process” Menu before switching printer, or some ironing settings might get lost (depending on your bambu studio version). Thanks to <a href="/en/@GianfLab" rel="nofollow">@GianfLab</a> for letting me know!</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779174/2024-03-21_12f81c5536987.png"></figure><h3>Notes:</h3><ul><li>Dial in your filament first (flow, pressure advance) or this print won't make a lot of sense</li><li>Results will be different for different filament types (materials) and often also different filaments, sometimes even for the same brand&product but different color (same as with most filament settings/calibrations)</li><li>For filaments that tend to blob (e.g. PETG) it might make sense to check for blobbing frequently and/or only print 1 stripe at a time. Having “half-liquid” filament around your nozzle while ironing will affect the ironing result.</li></ul>

Ironing calibration: speed&flow,15-40mm/s & 10-50%

Tests

Madness3D

Jack o lanterns scaled to fit LED tealights for amazing decorations for halloween.&nbsp;There are 6 different models available for printing.The lid fits all models.&nbsp;New printer profiles added for quicker printing with less filament use.There has also been added print profiles for the models in 200% scale.&nbsp;Make sure to remove the support inside the lid so that the model closes properly.&nbsp;There are print profiles available per model and all together.&nbsp;I would recommend using LED diffuser over the led tealights to soften the light. Model for Led diffuser can be found on my profile uploads.

Halloween Pumpkin -  LED Tealight holder - Jack o lantern

Halloween

JamesThePrinter

A small, strong case with a collection of optional inserts for different uses.&nbsp;<h3>Case</h3>Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.This can be a standalone case or you can add inserts for more functionality. &nbsp;&nbsp;Print SettingsBase and Lid can be printed with 3 perimeters and 0% infill. Using these settings, most walls will be solid. &nbsp;<h3>Optional Inserts</h3><ul><li>Battery Holders <ul><li>AA Holder - fits up to 6 AA batteries</li><li>AAA Holder - holds up to 8 AAA batteries</li><li>9V Holder - fits up to 2 9V batteries</li></ul></li><li>Digital Storage Holders - Can be used together or separately<ul><li>MicroSD Card Holder - fits up to 12 MicroSD cards in the lower section</li><li>SD Card Holder - fits up to 6 SD cards in the upper section</li></ul></li><li>Dividers<ul><li>Full Divider - Splits the entire case into 2 compartments</li><li>Upper Divider - adds 2 compartments on top - Can be used with the Lower Divider</li><li>Lower Divider - adds 2 compartments on bottom - Can be used with the Upper Divider</li></ul></li><li>Nozzle Holders - Can be used together or separately <ul><li>Upper Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)</li><li>Lower Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)</li></ul></li></ul>Print SettingsNo special print settings are needed for any of the inserts. I used 3 perimeters and 10% infill. &nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:Black Case<ul><li>polymaker PolyTerra Charcoal PLA</li><li>Hatchbox Sparkle Gray PLA</li></ul>Red Case<ul><li>polymaker PolyTerra Army Red PLA</li><li>polymaker PolyTerra Lava Red PLA</li></ul>Yellow Case<ul><li>PrintBed Yellow PLA</li><li>polymaker PolyTerra Banana PLA</li></ul>Teal Case<ul><li>polymaker PolyTerra Arctic Teal PLA</li><li>PrintBed Baja Blue PLA</li></ul>Purple Case<ul><li>Prusament Galaxy Purple PLA</li><li>Fillamentum Lilac PLA</li></ul>Orange Case<ul><li>CC3D Flame Orange PLA+</li><li>Inland Orange PLA</li></ul>Green Case<ul><li>PrintBed Green PLA</li><li>polymaker PolyTerra Forest Green PLA</li></ul>Blue Case<ul><li>GIANTARM Matte Navy Blue PLA</li><li>polymaker PolyTerra Sapphire Blue PLA</li></ul>

Multi-Use Case with Inserts

Cases/Containers

agepbiz

<a target="_blank" href="https://www.youtube.com/shorts/nvIDWYT1Sxo" rel="nofollow noopener">https://www.youtube.com/shorts/nvIDWYT1Sxo</a>*edit 03.25.23 added a 150% scale version *edit 04.14.22 added high-poly egg with magnet lock (fits 3x1mm, add a drop of glue)I have completely redesigned the old Surprise Egg #3 - Tiny Wheel Loader. I was never really satisfied with the old version especially the wedged cabin. The toy is print-in-place without any need for support structures. It has rotatable wheels, liftable loader and articulated steering apparatus<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model by <a target="_blank" href="https://www.printables.com/@agepbiz#join:144" rel="nofollow noopener">joining the Commercial license tier in my club</a>&nbsp;Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a>YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a>Twitter: <a target="_blank" href="https://www.twitter.com/agepbiz" rel="nofollow noopener">https://www.twitter.com/agepbiz</a>&nbsp;Surprise Egg #1 - Tiny Haul Truck: <a target="_blank" href="https://makerworld.com/en/models/13916" rel="nofollow noopener">https://makerworld.com/en/models/13916</a>Surprise Egg #2 - Tiny Fork Lift: <a target="_blank" href="https://makerworld.com/en/models/13917" rel="nofollow noopener">https://makerworld.com/en/models/13917</a>Surprise Egg #3 - Tiny Wheel Loader: <a target="_blank" href="https://makerworld.com/en/models/13918" rel="nofollow noopener">https://makerworld.com/en/models/13918</a>Surprise Egg #4 - Tiny Excavator: <a target="_blank" href="https://makerworld.com/en/models/13919" rel="nofollow noopener">https://makerworld.com/en/models/13919</a>Surprise Egg #5 - Tiny Fire Truck: <a target="_blank" href="https://makerworld.com/en/models/13920" rel="nofollow noopener">https://makerworld.com/en/models/13920</a>Surprise Egg #6 - Tiny Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13931" rel="nofollow noopener">https://makerworld.com/en/models/13931</a>Surprise Egg #7 - Tiny Car Carrier: <a target="_blank" href="https://makerworld.com/en/models/13922" rel="nofollow noopener">https://makerworld.com/en/models/13922</a>Surprise Egg #8 - Tiny Racecar: <a target="_blank" href="https://makerworld.com/en/models/13923" rel="nofollow noopener">https://makerworld.com/en/models/13923</a>Surprise Egg #11 - Tiny Harvester: <a target="_blank" href="https://makerworld.com/en/models/13924" rel="nofollow noopener">https://makerworld.com/en/models/13924</a>Surprise Egg #12 - Tiny Steamroller: <a target="_blank" href="https://makerworld.com/en/models/13925" rel="nofollow noopener">https://makerworld.com/en/models/13925</a>Surprise Egg #13 - Tiny MiG Jet Fighter: <a target="_blank" href="https://makerworld.com/en/models/13929" rel="nofollow noopener">https://makerworld.com/en/models/13929</a>Surprise Egg #14 - Tiny Dump Truck: <a target="_blank" href="https://makerworld.com/en/models/13927" rel="nofollow noopener">https://makerworld.com/en/models/13927</a>Premium designs:Surprise Egg #9 - Hollow Egg <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-9-hollow-egg</a>Surprise Egg #10 - Hollow Dragon Egg: <a target="_blank" href="https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/surprise-egg-10-hollow-dragon-egg</a>&nbsp;WARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.<h3>Print instructions</h3>No Support No Raft 0,1mm Layer Height 3 Perimeters/walls on the Toy 2 Perimeters/walls on the Egg 30mm/s printspeedIf you want to print bigger versions of the wheel loader use the file loader_200.stl for a 200% version and loader_300.stl for a 300% version