SubGTI

Majkl.k88

Periodic table ideal for educationYou can print it separate or in groups wih matching colours as picture included

Periodic Table

Share

Rocco's Stuff

This is a container with a twist-top mechanical iris opening mechanism. The project requires (10) 5mmx16mm metal dowels, which can be purchased on Amazon. Glue is required - I recommend JB weld. See my Youtube page for an assembly video.<a href="https://youtube.com/shorts/Pkz72YNvrwk?feature=share" rel="nofollow">https://youtube.com/shorts/Pkz72YNvrwk?feature=share</a>NOTE: Video shows process after metal dowels have been glued into pieces “FRAME-TOP” and “INNER RING”

Mechanical Iris Container

6 Hrs

squinn

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_fd01d80e216de.gif"></figure>This model is an easy print that requires no supports, and three different sizes are provided to accommodate cables of different lengths. If you're not sure which to choose, I'd recommend starting with the “medium” size.&nbsp;After printing, you'll want to place the cable within the groove at its halfway point, close the lid (which is intentionally designed to close tightly), wind up the cord clockwise using the handle, and then extend by simply grabbing the cable by both ends.&nbsp;Update 2023-09-13:&nbsp;Alternative smooth-sided versions of all three sizes have now been added, and also the handle design was slightly adjusted to add a small fillet and chamfer to decrease the bridge distance. Here's a close-up picture of the updated handle on the knurled and smooth-sided versions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_e75ea621224d08.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_68f2b35a6774b8.jpg"></figure>&nbsp;

Portable Cable Organizer / Winder

5 Hrs

mladen88

21.06.24: added smaller Version that fits on A1 mini&nbsp;I made this Container/Storage for the cable organizer/winder by squinn. This size fits 7 medium sized cable organizers or in my case 5 medium, 1 large and 1 small.&nbsp;In this version I only added the honeycomb pattern.Link to “old” version: <a target="_blank" href="https://makerworld.com/de/models/62199#profileId-64719" rel="nofollow noopener">https://makerworld.com/de/models/62199#profileId-64719</a>Skadis version: <a target="_blank" href="https://makerworld.com/en/models/170648#profileId-187318" rel="nofollow noopener">https://makerworld.com/en/models/170648#profileId-187318</a>Link to the Cable Organizer/Winder by squinn: <a target="_blank" href="https://makerworld.com/de/models/13849#profileId-13650" rel="nofollow noopener">https://makerworld.com/de/models/13849#profileId-13650</a>&nbsp;&nbsp;

Storage Box for Portable Cable Organizer V2

3 Hrs

V3 Precision

This is a spool winder for transferring filament from one spool to another. Inspired by the need to use certain filament spools for the Bambu Lab AMS. This build should speed up the process and give a nice tight winding. There is room for improvement, so feel free to give some feedback either on Printables or on the Youtube videos.This version is 100% 3D printed (not including the mounting screws). Future versions will use bearings and possibly a motor to drive the gears.The images show the assemblies mounted to a 2x6 for testing. The assemblies can be mounted to a similar board or to a base made from aluminum extrusions.&nbsp;Printing RecommendationsI used PLA while developing the spool winder. I would recommend using PETG, or Nylon CF, or other stronger, stiffer filament.The ‘worm’ gear can be tricky to print. In Bambu Lab Studio, I set the part upright and set support to tree (auto) and threshold angle at 10. Set a brim at 8mm.The gears are easy to print and require no support or post processing.The bases need some support and did well with tree (auto) and threshold angle of 30.I used 4 walls and 15% infill on most pieces. The thumbscrews I used 100% infill.&nbsp;AssemblyMost of the assembly is easy and self-explanatory.Note that the rear driven gear is reverse threaded.Specific instructions can be found in an upcoming Instructions Video …….There will also be a link to the video on the V3 Precision website.&nbsp;#best3dp2023<figure class="media"><div data-oembed-url="https://youtu.be/3llHdgb1ftQ?si=rh9tLXTMeOSzBDXe"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/3llHdgb1ftQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/ru2TtLahlmw?si=5opj3V5R-Ab6cPFX"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/ru2TtLahlmw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Filament Spool Winder

15+ Hrs

123cut

This box was created for these screwdrivers. I recommend printing them; they are fantastic<a target="_blank" href="https://makerworld.com/en/models/122611#profileId-132118" rel="nofollow noopener">Micro Screwdriver KIT by 123cut - MakerWorld</a>

micro Screwdriver BOX

1.5 Hrs

Hey,I made these carabiners in 3 different sizes. Perfect for hooking things to a backpack, bag or trousers. Have fun with them!&nbsp;If you like this model, please consider gifting me your Boost. Thanks

Carabiner in 3 different sizes

0.25 Hrs

Sakul

🍦Pop &amp; Catch Toys Ice Cream Cone🍦 The Pop and Catch Ice Cream Toys are the perfect pastime activity for a beach days or playing in the garden! These Pop &amp; Catch launchers are designed to resemble colorful ice cream cones can be used with normal platic balls like a ping pong ball or even with a 3d printed version. For assembly, put the cage on top and twist, for the launch mechanism you need a rubber band, use a shorter one for more power. The Flipper is inserted from the side of the cone and clipped into postition, now hook the rubber band in place, there are different options to do this, depending on the length of your rubber band. Have fun!

Pop & Catch Toys Ice Cream Cone

2 Hrs

BamBam Design

Mini Bit Tool HandleEasy printable small bit tool handle for normal hexagon bits (¼" ~ 6,35mm).Holes for Magnets Ø6x1mm are integrated. You can simple glue the magnet in if you want.You can choose “Normal Handle and "Extra Grip Handle” with a fuzzy skin.After print it could be a bit tightly, after a few uses it has the perfect fit.😉&nbsp;Happy printing👍&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Mini Bit Tool Handle - Screwdriver

0.5 Hrs

Tiny, simple, and handy: I love it!Sometimes, you just need an extra screwdriver, and if you're like me, you have hundreds of little hex screwdrivers lying around that never seem to wear out. Enter the Micro Screwdriver – a perfect solution.With a small and unassuming handle, it makes these little tools incredibly useful without taking up much space in your drawer or pocket. A reliable companion for all your screwdriving needs! This box was created for these screwdrivers. I recommend printing them; they are fantastic. <a target="_blank" href="https://makerworld.com/en/models/135792" rel="nofollow noopener">micro Screwdriver BOX by 123cut - MakerWorld</a>

Micro Screwdriver KIT

1 Hrs

TravockMD

Needed a simple remix to be able to use my Xiaomi Hygrometer. Not limited by any knowledge about how to edit an STL, I came up with this remix design. Be aware, it works and is functional but it will not win any design contest.&nbsp;<figure class="table"><table><tbody><tr><td>Posting a make and liking the model is much appreciated!</td></tr></tbody></table></figure>

Silica Dry Box Hydra AMS for Xiaomi Hygrometer

Later

JamesThePrinter

This container uses a quadruple slider-crank mechanism to lock its lid in place. There are many sizes available.Widths/Lengths available:<ul><li>100mm x 100mm</li><li>150mm x 150mm</li></ul>Heights available:<ul><li>30mm</li><li>50mm</li><li>100mm</li><li>150mm</li></ul>3 knob designs are also available.I have also included the F3D file for further customization. There are 2 parameters that can be adjusted to change the height and width (length and width are equal) of the container.Example of files needed (100mm x 100mm x 50mm container):<ul><li>Lid 100</li><li>Container 100-50</li><li>Outer Linkage 100 (Print 4)</li><li>Mid Linkage (Print 4)</li><li>Inner Linkage</li><li>Knob</li></ul>&nbsp;Print SettingsPrint all pieces in the orientation that they come. Be sure to print 4 mid and outer linkage pieces. Although PLA will work, PETG may work better for the mid linkages.&nbsp;Lid Assembly InstructionsWith the lid upside down, insert the inner and outer linkages. The orientation of the outer linkages matter. One face is flat, while the opposite has a slight taper. The flat side should be against the lid. The tapered side should face the container.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/1360890085/draft/2023-08-14_f0m8sis0xog4.png"></figure>&nbsp;With the inner linkage in a horizontal orientation and the outer linkages sticking out about 5mm past the outer edge of the lid, the mid linkages should snap into each piece. Some force is required. Be sure that you press them straight down - if they are tilted during pressing, they may snap.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/1360890085/draft/2023-08-14_9gdtgafgtfk2.png"></figure>&nbsp;The knob will need to be glued in place on top of the inner linkage. Place the knob onto the inner linkage and ensure that the linkage moves smoothly. Once happy with everything, use a small amount of glue to permanently connect the knob and inner linkage. If you use too much, it may run out onto the lid and lock everything in place.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/1360890085/draft/2023-08-14_mfozaxj7e0i9.png"></figure>&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Pink Container<ul><li>polymaker PolyTerra Candy PLA</li><li>Inland Pink Tough PLA</li></ul></li><li>Red Container<ul><li>polymaker PolyTerra Army Red PLA</li><li>polymaker PolyTerra Marble PLA</li></ul></li><li>Green Container<ul><li>Prusament Simply Green PLA</li><li>Prusament Opal Green PLA</li></ul></li><li>Orange/Yellow Container<ul><li>Inland Yellow Tough PLA</li><li>CC3D Flame Orange PLA+</li></ul></li></ul>

Mechanically Locking Container

4 Hrs

2.5 Hrs

3.5 Hrs

9 Hrs

This simple and stackable egg dispenser is designed for very space-saving storage of chicken eggs.

Egg Container

Berrin

Toys

3dcreat3d

wine holder chain

Bad Print

EPIQ3D

Make All your herbs easy in the kitchen.This planter ensures that your herbs stay fresh and hydrated.If you dont yourself use fresh herbs, i know this will be a great gift for those who do.&nbsp;<figure class="image image_resized" style="width:83.65%;"><img src="https://makerworld.bblmw.com/makerworld/draft/836587/2024-04-09_862bb3e7c7657.png"></figure>&nbsp;The Design is quite unique, and are inspired by the hexagon shape (or maybe a UFO?). This planter dosnt blend into any kitchen aesthetic, so im certain that its a conversation starter. &nbsp;<h3>HOW IT WORKS</h3>The self watering planter is designed to slowly absorb water from the reservoir (This needs to be filled up occasionally).Its a two piece print (uni body and soil bed).&nbsp;<figure class="image image_resized" style="width:83.76%;"><img src="https://makerworld.bblmw.com/makerworld/draft/836587/2024-04-09_75f244066a46f.png"></figure>&nbsp;The water inlet, is alongside the upper part, and is guided down to the reservoir. The bottom acts like a overflow, so you dont overfill the reservoir.&nbsp;It is recommended to use a wicking material at the center (between the soil and the water).This helps to absorb water into the soil slowly. You can place a couple of cotton balls / cotton wool in the bottom of the pot.I recommend filling wicking material so it is above the reservoir edge, then fill with soil, and your herb of choice.&nbsp;&nbsp;&nbsp;Basic print settings:<ul><li>Infill : 10%</li><li>Walls: 3</li><li>Top/bottom shell layers: 3</li><li>support may be needed on soil bed (depends on printer settings)</li></ul>

Self watering Hexapot

Best

hollowmaker

&nbsp;&nbsp;Revitalize your workspace with the charm of the Crushed-Paper-Style Pen- Brushes holder. Transforming your desk into a visually appealing and well-organized haven, this pen holder not only serves its practical purpose but also doubles as an intriguing piece of desk decor. Crafted for design enthusiasts and office connoisseurs alike, this penholder is expressly not intended for drinking.&nbsp;The distinctive &#39;crushed-paper&#39; design lends an artistic touch, making it a captivating focal point that garners admiration in any setting. Elevate your workspace aesthetics with this unique and functional addition, where the artistry of crushed paper meets the practicality of a penholder.&nbsp;No supports needed!&nbsp;Discover more of my work by exploring my other designs! Thank you! :-)&nbsp;<a target="_blank" href="https://makerworld.com/en/models/488866#profileId-401919" rel="nofollow noopener"><img class="image_resized" style="width: 64.8%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000174072/design/2024-06-09_4e1f63fc0c09b.gif"></a><a target="_blank" href="https://makerworld.com/en/@hollowmaker" rel="nofollow noopener"><img class="image_resized" style="width: 65.05%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000174072/design/2024-06-01_e76a139217ed3.jpg"></a>&nbsp;Stay tuned for more innovative designs by following me. Thank you for your support!&nbsp;

Crushed Paper Cup

Duru

This is remixed version  of thingiverse model, which is completely printed without supports.- I changed the dimensions, completely redesigned the Silver Plate, the same with the Red middle, White sides are now easier to print without supports, I added insert letters,  it is also possible to use a USB C and micro USB cable (written in the model name!) Added .step file&nbsp;ASSEMBLY INSTRUCTIONS:<ol><li>Insert the red center piece into the white side piece with the cord channel</li><li>Push the cord through the hole in the gray base</li><li>Push the cord through the hold in the red center</li><li>Adjust the length of exposed cord in the middle and then push the cord into the channel in the white side piece</li><li>Cover with the other white side piece</li><li>Push the 2 gray columns into the gray base</li><li>Slide the gray base assembly up into the top assembly</li><li>Push the cord out the side channel on the bottom and cover with the final gray base piece</li></ol>

Tesla Supercharger Iphone Charger

linus3d

<h2>Introduction</h2>The <a target="_blank" href="https://makerworld.com/en/models/13806#profileId-129851" rel="nofollow noopener">3D Printable Jet Engine </a>is great! However, I wanted a turbojet or low bypass turbofan to complement the original. So, I got to work designing the turbojet,<a target="_blank" href="https://makerworld.com/en/models/477462#profileId-388528" rel="nofollow noopener"> afterburner and variable exhaust nozzle.</a>&nbsp;This conversion uses fewer screws than the original! It adds an additional compressor stage, making the model longer and thinner. The design philosophy matches the original, with hints of the <a target="_blank" href="https://en.wikipedia.org/wiki/General_Electric_J79" rel="nofollow noopener">GE J79</a> visible in the inlet.&nbsp;I designed a <a target="_blank" href="https://makerworld.com/en/models/477457#profileId-388519" rel="nofollow noopener">stand</a>. Making the jet sit low to the ground. It works great!&nbsp;I made a video and written instructions for assembly. ( Video is more thorough).My print profile uses three colors, but feel free to unleash your creativity.&nbsp;If you don&#39;t yet have the hardware for the Jet Engine, I offer a great kit on <a target="_blank" href="https://linus3d.de/products/jet-engine-components-kit" rel="nofollow noopener">my website</a>. It provides better hardware at a lower cost and greatly supports my work. Thank you.&nbsp;Check out the <a target="_blank" href="https://makerworld.com/en/models/477462#profileId-388528" rel="nofollow noopener">Afterburner &amp; Variable Nozzle!</a>&nbsp;Happy printing and great success! Message me with any questions!&nbsp;<h3>Tools used for assembly:</h3><ul><li>M2 Screwdriver</li><li>Pliers or anything that can hold nuts</li><li>Plastic Glue</li></ul>&nbsp;<h2>Assembly</h2>&nbsp;<figure class="media"><oembed url="https://www.youtube.com/watch?v=q-FUjxFJqak&amp;list=PL8UJHE2kIJR-gfuExW762FB3cbsvxPOr2&amp;index=1"></oembed></figure>&nbsp;<figure class="table" style="width: 79.7%"><table class="ck-table-resized" style="border: 3px solid hsl(150, 75%, 60%)"><colgroup><col><col></colgroup><tbody><tr><td>Pliers aren&#39;t needed for this step. Drop the nuts into the slots and screw in the bolts.</td><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000477475/design/2024-05-20_a17c81ffcbf94.jpg"></figure></td></tr><tr><td>Use plastic glue. I let the glue dry properly before installing into casing.</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000477475/design/2024-05-20_497a72db2ac2b.jpg"></figure></td></tr><tr><td>Don&#39;t glue them in place yet! :)</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000477475/design/2024-05-20_254d558ab4596.jpg"></figure></td></tr><tr><td>Easy…</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000477475/design/2024-05-20_676037b4e1e44.jpg"></figure></td></tr><tr><td>The bearing will also snap into place.&nbsp;</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000477475/design/2024-05-20_ce9c5144d1a1b.jpg"></figure></td></tr><tr><td>Easy…</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000477475/design/2024-05-20_3fa0e4a28d73.jpg"></figure></td></tr><tr><td>Don&#39;t tighten to much. You want even spacing around the inlet.</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000477475/design/2024-05-20_79e7688b07e24.jpg"></figure></td></tr><tr><td>Easy… (I don&#39;t use glue)</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000477475/design/2024-05-20_42ea63250832d.jpg"></figure></td></tr><tr><td>Last step… Make sure everything works. Congratulations! Thanks for printing!</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000477475/design/2024-05-20_a7de2137028fc.jpg"></figure></td></tr><tr><td>Placement of the engine on the stand</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000477475/design/2024-05-20_481c8f7cac0b1.jpg"></figure></td></tr></tbody></table></figure>&nbsp;Designed by linus3d My website: <a target="_blank" href="https://linus3d.de/" rel="nofollow noopener">https://linus3d.de/</a>

3d Printable Turbojet Engine 

Mechanical

Give your plants/herbs the best start.This planterbox ensures that your seedlings stay fresh and hydrated.If you dont yourself grow plants/herbs, i know this will be a great gift for those who do.&nbsp;<figure class="image image_resized" style="width:86.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/854456/2024-04-12_9859755e4fc52.png"></figure>&nbsp;The Design is made to be as aesthetic as possible, to blend in no matter where you place it.There a two different bases, one for 8 planters and one for a single planter. Then you can choose if you want 4 or 5 in different locations.&nbsp;<h3>HOW IT WORKS</h3>This self watering planter is designed to slowly absorb water from the reservoir (This needs to be filled up occasionally).The lids provides a warm and humid environment for the seedlings, for this to work properly they should be printet in clear material.Individual lids ensures that you can remove lids from some of the seedsplants if needed, and others are not quite there yet.To prevent to much humidity and the risk of mouldy soil, the lids have ventilation holes.&nbsp;&nbsp;<figure class="image image_resized" style="width:86.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/854456/2024-04-12_16e56efe4909d.png"></figure>&nbsp;There are 2 water inlets in the planters, where it is recommended to use a wicking material at the bottom.This helps to absorb water into the soil slowly and prevent excess moisture in the soil. To much moisture can reduce oxygen in the soil, damage fine root hairs, and render the root system unable to absorb water.&nbsp;You can place a couple of cotton balls / cotton wool in the bottom of the pot.&nbsp;The planters are splittable to prevent damaging the delicate seed sprouts, when they are big enough to be transplanted.(When they are ready to be transplated, then check out my other self watering planters for herbs and flowers.)&nbsp;To prevent/slow down evaporation of the water in the reservoir (and stabilize the plantes), its recommended to use the provided lids.&nbsp;&nbsp;Optionally you can use the funnel to fill in soil to the planters, use the stamper to LIGHTLY press the soil down.Use the other side of the stamper (the poker) to make a hole for the seed. &nbsp;&nbsp;Basic print settings:<ul><li>Infill : 10%</li><li>Walls: 3</li><li>Top/bottom shell layers: 3</li><li>No support needed</li></ul>Dimensions: 8 planter base - H: 32.3, L: 231.8mm, W: 121.8mmsingle planter base - L/W: 66.8mmPlanter - H: 111mm, L/W: 42.8mm&nbsp;------------------------------------------------------------------------------------------------------------------------------------------If there is any issues or comments, dont hesitate to reach out.I will try to incorporate any issues to a updated design if needed.

Self watering Seed starter

Print

Chris1974

Edit: I added a solid Piston for people that don't want to add the magnet.&nbsp;Never lose your keys again with this little magnetic keychain shaped like an engine piston.&nbsp;Use it to keep your keys where you can find them again. &nbsp;Stick them on the fridge or your toolbox or anything else metal.&nbsp;Never lose your keys again! &nbsp;Just print the file, assemble it and insert one 10mm diameter magnet (3 or 5 mm thick) in the piston head and presto!&nbsp;Magnets needed: <a target="_blank" href="https://www.amazon.com/VSKIZ-Refrigerator-Muti-use-Neodymium-Whiteboard/dp/B0BVY5VYQY" rel="nofollow noopener">https://www.amazon.com/VSKIZ-Refrigerator-Muti-use-Neodymium-Whiteboard/dp/B0BVY5VYQY</a>&nbsp;For real motorheads and gasmonkeys.&nbsp;Also works as a nice refrigerator magnet of course!

Magnetic moving Piston Keychain

Keyring

Every Day Counts

This model mimics the stands that came without Fisher and Paykel fridge. Unfortunately, it only came with two stands and we often need more than that. 😀🍷&nbsp;The design clips over a metal strip at the back of the fridge shelf to hold it in place. If your fridge does not have this, adding some non-slip rubber feet to the bottom would be a good idea.&nbsp;Unfortunately, this model needs support materials to print.

Refrigerator wine bottle rest/stand

Accessories

mail.iou

This is an artwork made using HueForge, which realistically presents butterfly specimens. Suitable for this 150x150mm frame. https://makerworld.com/en/models/57319This artwork requires three colors of filament: black, white and gray. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Gray At layer #11 (0.96mm) swap to Jade White for the rest.

Butterfly Specimens - Realistic Presentation

Jewelry

T_WITHE

Introducing Pierceable Veggie Markers - the perfect blend of garden organization and individual style! These markers are a must-have for any gardener. Easily insert them into the soil to identify and track your vegetables.Acting as practical labels, they help gardeners stay organized while adding aesthetic charm to the garden bed.&nbsp;Customize them to your heart's content with bamboo studios and colorful filaments. Have specific requests or unique ideas? Share them in the comments! I'm here to bring your vision to life.Share your creations and let your garden creativity bloom! Thank you for choosing Pierceable Veggie Markers! If you don't have an (AMS), you can still print in multiple colors using manual layer switching. The varying layer heights facilitate this, allowing for manual layer changes to achieve printing in 2 or more colors.

Pierceable Veggie Markers,

Hobbies

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

Kitchen

Biskup

Portable and easy to assemble table good for trips or just to have for sure in car. Just screw legs to its possition, take Accessories from drawer and You can enjoy food or drink :- )&nbsp;I have it from PLA, but believe that PETG will be better at least for desk part.&nbsp;Hope You will like it :- )

Travel Portable table with two drawers

Travel

Reuter_Corp.

<h2>New !!! A1 mini version out now → last profile in the list</h2>update 26/01/24 The Coffee Capsule Box was missing it&#39;s online now. sorry my badThe Bambulab edition you can finde here <a target="_blank" href="https://makerworld.com/en/models/154412#profileId-168837" rel="nofollow noopener">https://makerworld.com/en/models/154412#profileId-168837</a><h2>Desktop Organizer - Slide Box</h2> I want to introduce my multi usable slide box The cover is slideable and disappear magically in the bottom<figure class="image image_resized" style="width:38.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/817558/2024-01-24_e39ed8848f702.gif"></figure><h2> </h2><h2>!! Important befor assembling !!</h2> <figure class="image image_resized" style="width:40.77%;"><img src="https://makerworld.bblmw.com/makerworld/draft/817558/2024-01-24_9f532a7742521.png"></figure><figure class="image image_resized" style="width:39.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/817558/2024-01-24_18a6483379c49.png"></figure> <h3>!!watch out !! put the inlay tray befor glueing the last side, after assembling its no more possible to put a tray!!</h3><h2>Instructions</h2><figure class="image image_resized" style="width:68.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/817558/2024-02-04_c13485b2cccbc.jpg"></figure><h3>dont use too much glue, otherwise the lid possibly glued together.</h3><figure class="image image_resized" style="width:68.95%;"><img src="https://makerworld.bblmw.com/makerworld/draft/817558/2024-02-04_7da60505734988.jpg"></figure><figure class="image image_resized" style="width:67.9%;"><img src="https://makerworld.bblmw.com/makerworld/draft/817558/2024-02-04_7b392860ec5f48.jpg"></figure><figure class="image image_resized" style="width:67.64%;"><img src="https://makerworld.bblmw.com/makerworld/draft/817558/2024-02-04_3097834827a718.jpg"></figure><h3>Keep under pressure for a min. let dry for 5min.</h3><figure class="image image_resized" style="width:68.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/817558/2024-02-04_9f01002ba7f6c.jpg"></figure><h3>if you need help let me know Thanks and happy printing</h3>&nbsp;This is no remix, some people might think i remixed those. No !!! It‘s my own design and got no template to create them. I can proof every single step in fusion360. There are similarities , yes of course, but thats normal, but the build and the total modell is created diffrently.&nbsp;Thanks &nbsp;

Slide Box 

Tabletop

Fletch

Is it dumb? Yes. Am I dumber for making it? Maybe. Now you can enjoy the weirdness of the Mutt Cutts van from the movie Dumb and Dumber. Relive your favorite moments with Lloyd Christmas and Harry Dunne. It will not tell you what the most annoying sound in the world is unfortunately.&nbsp;Fits all Bambu printer build plates and is easy to assemble.&nbsp;Assembly<ol><li>Insert the rims into each of the tires and attach to the chassis.</li><li>Attach side walls.</li><li>Bend the rear wall and attach.</li><li>Add the roof and windshield.</li><li>Attach the grill.</li><li>Attach the tongue.</li><li>Attach the hood.</li><li>Attach the dog parts and signs the side walls and roof. If printing a single color, pay attention to the direction of the signs.</li></ol>&nbsp;&nbsp;

Mutt Cutts Van Kit Card - Dumb & Dumber

Kit Card

sipura

Hello,UPDATE 26/1/2024:You can check you our new model, same like this one but XL bigger. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/157759#profileId-173134" rel="nofollow noopener">https://makerworld.com/en/models/157759#profileId-173134</a> &nbsp;&nbsp;UPDATE 19/1/2024:You can check you our new model, same like this one but smaller. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/146935#profileId-160286" rel="nofollow noopener">https://makerworld.com/en/models/146935#profileId-160286</a> &nbsp;My new model of the utility case.&nbsp;Simple print without supportAll parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x303pcs of screws M3x18&nbsp;Dimensions are in mm:&nbsp;<figure class="image image_resized" style="width:65.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_e25480cf53e6d.png"></figure><figure class="image image_resized" style="width:65.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_97292542d7a98.png"></figure>NEW:&nbsp;Now we made V2 model that has thicker hinges on each side by 1mm behind, and wall loops with 3pcs. For this model, instead of 3pcs M3x18mm screws, you now need 3pcs M3x20mm.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-01-13_6bc78c7c28bab.jpeg"></figure>&nbsp;Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.&nbsp;Enjoy printing and using this useful case.

Utility OG case

Case

Mirkosa

A customizable photo frame with built in saw-tooth style hangers and an optional stand. There are 12 different styles to choose from, including one&#39;s for the Cat and Dog Moms out there!&nbsp;There are blank versions for you to easily customize it with your own quote or vector directly within Bambu Studio. No modeling experience required.&nbsp;<figure class="image image_resized" style="width: 64.69%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451824/design/2024-05-03_5089a874c9911.jpg"><figcaption>Photo Dimensions, the teal outline represents a standard “Wallet” sized photo.</figcaption></figure><figure class="image image_resized" style="width: 64.01%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451824/design/2024-05-07_671857db2ed5b8.jpg"><figcaption>Wall hanger spacing</figcaption></figure>I recommend testing the ironing settings on a small print first. The back piece is designed to print either face up or face down based on your preference. My premade quotes are orientated face up to make it easier for people without an AMS to print it in multiple colors.&nbsp;The frame consists of a front and back piece printed separately. They are attached with printable screws. PLA is more than strong enough for these. But be careful not over-tighten the screws as they are fairly small and can easily be sheared from twisting too much.&nbsp;The stand is designed to attach directly to the back by replacing the 3 aligning screws with the longer ones provided. It&#39;s very secure and stable.

Diversity Hearts - Customizable Photo Frame

Gift

Darren

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model and want to encourage me to come up with more original and innovative designs please consider boosting this model.  I mainly design more unique and complex models that take longer to print.  Due to print time they get downoloaded less frequently than quick to print models.  Boost are a way to compensatie for this and are always greatly appreciated.   Thank you</boostcontent></boostme>&nbsp;Scrolling Memories for A1, X1 and P1&nbsp;Finding the ideal Mother’s Day gift is often a challenge. The best gifts are usually the ones that money cannot buy. Memories and souvenirs fall into this category. This is the inspiration for this model.&nbsp;The model is for a scrolling picture show with personal messages that is modelled in a book / Mother’s Day card format that you personalize with your own memories, souvenirs and messages.&nbsp;Any Mother will appreciate the thoughts and personal touches that go into creating this.&nbsp;Gathering pictures to creating the scrolling picture slide will be a fun family activity where you can relive fond memories. As a bonus, it will be further proof that buying a 3d printer was a brilliant idea.&nbsp;<figure class="table" style="width: 97.14%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444317/design/2024-04-26_27b54bb4e3192.png"></figure></td><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444317/design/2024-04-26_903dc86bd47e4.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444317/design/2024-04-26_c9dd2b190f082.png"></figure></td></tr></tbody></table></figure>&nbsp;The Model&nbsp;The model also has front and back panels that you can paint and personalize with Bambu studios. I also included optional blank panels as well as panels with special words.&nbsp;A few notes about the pictures and scrolling.&nbsp;The model can hold and scroll around 15 pictures and possibly more depending on materials used to print and hold the pictures.&nbsp;I have experimented with printed pictures and self-adhesive laminating film as well as regular paper that is scotch taped together.I used pictures printed on special picture paper and 3 mil laminating film but this ended up being somewhat thick and caused some spring back due to thickness. I solved this issue by designing the shafts to close tolerances to prevent a spring back issue.&nbsp;Printed pictures on plain paper that are taped together works best. I have not tried pictures printed on regular paper with 1.5 mil film but that should also work fine.&nbsp;The height of the pictures should not exceed 4 ½ inches or about 110 mm.&nbsp;3D Printing&nbsp;The model is easy to assemble and there is an instruction gif.&nbsp;I have included print profiles for the A1, X1 and P1.&nbsp;I welcome any comments and suggestions about improving Scrolling Memories.&nbsp;My designs &nbsp;I enjoy creating 3d models that others can use and appreciate.  It is a very fun pastime.   I find it very rewarding to see my models downloaded and printed.  I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. &nbsp;If you liked my model and wish to encourage me please give it a like or a boost. If you wish you can also help me with my <a target="_blank" href="https://ko-fi.com/darren3dmodels" rel="nofollow noopener">filament costs</a>.  Thank you.&nbsp;My Models&nbsp;If you are interested, here are some of my creations. You can also see all my models on my <a target="_blank" href="https://makerworld.com/en/@user_1543154938" rel="nofollow noopener">profile</a>.&nbsp;<figure class="table"><table style="border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/425827?from=search#profileId-337902" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444317/design/2024-05-05_8cb4bfc480828.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/425827#profileId-337902" rel="nofollow noopener">Autotray</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/439932#profileId-345597" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444317/design/2024-05-05_80f1fc53f1258.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/439932#profileId-345597" rel="nofollow noopener">Versa Mount</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/447157#profileId-353793" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444317/design/2024-05-05_252dfd34be1da.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/447157#profileId-353793" rel="nofollow noopener">Table saw</a><a target="_blank" href="https://makerworld.com/en/models/447157#profileId-353793" rel="nofollow noopener">Outfeed </a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/440873#profileId-346595" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444317/design/2024-05-05_c0c403ecc4bc.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/440873#profileId-346595" rel="nofollow noopener">Treat helper</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/457210#profileId-365192" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444317/design/2024-05-05_7677874c7a172.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/457210#profileId-365192" rel="nofollow noopener">Ipad tablet stand</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/432891#profileId-337490" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444317/design/2024-05-05_f02e210418cb4.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/432891#profileId-337490" rel="nofollow noopener">Autotray Lite</a></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Scrolling Memories - for A1, P1 AND X1 

Aycin

MakerVerse Designs

<h2>Updated Version available (V4):</h2><h3><a target="_blank" href="https://makerworld.com/en/models/485576#profileId-398072" rel="nofollow noopener">https://makerworld.com/en/models/485576#profileId-398072</a></h3>---------------------------------------------------------------------------------------------------------------A print-in-place slim wallet that offers space for 7 cards and a drawer for cash. I looked for a long time for a wallet that had enough space for cash, but I couldn&#39;t find one so I made this one myself.  This ist the Updated Version of Slim Wallet (V2)<ul><li>Now its print-in-place so you have to print only two parts and dont have to stop the print</li><li>I added a lever to securely open and lock the cards so that they don&#39;t fall out</li><li>I reworked the drawer mechanism so that it lasts better</li></ul>Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Slim Wallet (V3) - print in place

Tools

UPDATE 08 June 2024:Pistachio Bowl 2.5 has been released - <a target="_blank" href="https://makerworld.com/en/models/488822#profileId-404395" rel="nofollow noopener">check it out here</a>--------------------------------------------------------------------------------------------------------- — No support needed — — A pistachio bowl reinvented — Unique stylish design, crafted to be used, but also seen.2 in 1 function. Complete the collection, and check out the bowls little brother - Pistachio Cup So, how does it work, whats so speciel.Well.. not much ;) but the idea is, that when you dispose of the empty shells, you put them in the hole (nothing new there).BUT- when the spot beneath gets overcrowded of sheels, dont rattel the bowl - just turn the top to a new spot.If shelled nuts is not for you, then the bottom part can also be used as a standalone bowl And, its pretty … Holds about 250 grams

Pistachio bowl 2.0

Bowl

Creatività in 3D

<h2> </h2><h2> </h2><h2>TIC-TOC v1</h2>&nbsp;Table or wall clock with quartz movement.Watch designed on Fusion 360&nbsp;Printed on 9 plates, each plate corresponds to a layer of the watch which will be assembled with glue.Each plate contains the bodies of the objects to be printed, all separate, therefore colorable as desired.The assembly takes place in layers and the watch allows you to insert a quartz movement that can be purchased on Amazon like this one:&nbsp;<a target="_blank" href="https://amzn.eu/d/gyWmsSv" rel="nofollow noopener">https://amzn.eu/d/gyWmsSv</a> with 28mm long shaft or 1.10 Inches&nbsp;The clock has a hole to hang it on the wall but the support base for the desk\table is included in the files&nbsp;<h2>For Assemble:</h2>&nbsp;Layer 1<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_2d0f4cdc496b4.png"></figure>&nbsp;Paste Layer 2 as follows, so on for all the layers as in the images<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_31b277779671f.png"></figure>Layer 3<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_bbbcf1f8a87e.png"></figure>Layer 4 *Pay attention to this step, the frame indicates the minutes, align them with the hole to hang it on the wall (12 o'clock)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_427e67b6950c6.png"></figure>Layer 5 *Pay attention to this step, the frame indicates the hours, align them with the hole to hang it on the wall (12 o'clock)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_04f06e78c5afd.png"></figure>Layer 6<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_95024f9d480ff.png"></figure>Layer 7<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_d8beb0ac08a22.png"></figure>Layer 8<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_c683ca6375c3b.png"></figure>Layer 9<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_508c2dc9f1af1.png"></figure>Finish result<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/517790/2024-02-08_8c6b26f5cd074.png"></figure>&nbsp;In the images the pieces are still uncut to make room for the quartz movement. It was deliberately left to visualize the assembly of the components more easily&nbsp;I hope you like my work, I had to carry out several tests before finding the right compromise to share with all of you.The start date of the project is imprinted on the watch.&nbsp;Good job everyone and color the clock and its components as you like&nbsp;

TIC-TOC v1 Table or wall clock

Interesting

Eddie

<h2>Automated Condom Dispenser v1</h2>Introducing the ultimate in convenience and discretion; this revolutionary 3D printed condom dispenser! &nbsp;Say goodbye to fumbling around in drawers or pockets when the moment strikes – this sleek and innovative design ensures that protection is always within reach.&nbsp;Crafted with convenience in mind, it features a clever rubber band mechanism that automatically dispenses a condom with just a quick pull. No buttons, no hassle – just smooth, effortless protection when you need it most.&nbsp;With its discreet size and modern aesthetic, this dispenser seamlessly blends into any environment, whether it's your bathroom or bedroom.&nbsp;Don't let awkward moments or interruptions ruin the mood – keep the passion alive with this amazing print, a must-have accessory for every modern lover. Download today and experience a whole new level of convenience and confidence in your intimate moments!<h3>Assembly</h3>How to attach rubber bands:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/766744/2024-03-20_f8dd197fdd1d1.png"></figure>Note:Depending on the size of your rubber band, you may have to double it up to have it work as intended.&nbsp;Let me know if more instructions are necessary.