owen.pan

pldemon

Holder for a fan that can be used together with an Intel X540-T2 10G network card. These cards are also sold under the brand &#34;Inspur&#34; and heat up quite quickly during normal operation. The temperature reaches values that can even damage the motherboard. A small 40 mm cooler (in my case a Noctua NF-A4x10 FLX) ensures sufficient cooling and safety during operation.

Intel/Inspur  X540-T2 10G Dual RJ45 Fan Holder

电子设备

AU3D

This holder is specifically designed for Bambu Labs own 3D Printing Adhesive. The holders features 2 custom designed hooks with minimal tolerance, offering a decent amount of friction to keep the holder in place.<h3>Printing Instructions</h3>The print profile is optimized with zero layer cooling and no cooling for the initial three layers, effectively reducing the print time by nearly 50%. If you experience any difficulties, reverting to the standard PLA settings is recommended as a troubleshooting step.<h3>Other Glue Holder</h3><ul><li>Round 31mm: <a target="_blank" href="https://makerworld.com/en/models/462713" rel="nofollow noopener">1 Slot</a> | <a target="_blank" href="https://makerworld.com/en/models/466613" rel="nofollow noopener">2 Slots</a> | <a target="_blank" href="https://makerworld.com/en/models/468544" rel="nofollow noopener">3 Slots</a> | <a target="_blank" href="https://makerworld.com/en/models/31006" rel="nofollow noopener">6 Slots</a></li><li>Round 38mm: <a target="_blank" href="https://makerworld.com/en/models/473523" rel="nofollow noopener">1 Slot</a> </li><li>Elliptical 36x26mm: <a target="_blank" href="https://makerworld.com/en/models/462846" rel="nofollow noopener">1 Slot</a> | <a target="_blank" href="https://makerworld.com/en/models/473540" rel="nofollow noopener">2 Slots</a> | <a target="_blank" href="https://makerworld.com/en/models/489999" rel="nofollow noopener">3 Slots</a></li><li>Elliptical 36x22.5mm: <a target="_blank" href="https://makerworld.com/en/models/473528" rel="nofollow noopener">1 Slot</a></li><li>Cross 43x27mm: <a target="_blank" href="https://makerworld.com/en/models/463692" rel="nofollow noopener">1 Slot</a> | <a target="_blank" href="https://makerworld.com/en/models/494621" rel="nofollow noopener">2 Slots</a></li><li>Bambu Lab Adhesive: <a target="_blank" href="https://makerworld.com/en/models/134538" rel="nofollow noopener">1 Slot</a></li></ul><h3>Skadis Collection</h3>I am constantly developing more IKEA Skadis attachments. Check out my<ul><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/453266" rel="nofollow noopener">IKEA Skadis Shelves, Trays and Container Collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/188108" rel="nofollow noopener">General IKEA Skadis Collection</a></li><li><a target="_blank" href="https://makerworld.com/en/@AU3D/collections/1044616" rel="nofollow noopener">IKEA SKADIS Boards Collection</a></li></ul><h3>Bambu Lab Parts &amp; Accesories</h3>More Accessories and Parts for Bambu Lab printers can be found in my collection:<ul><li><a target="_blank" href="https://makerworld.com/en/models/97556" rel="nofollow noopener">Bambu Lab Parts &amp; Accessories</a></li></ul>

Bambu Lab Adhesive / Glue Holder for IKEA Skadis

宜家洞洞板

beanieboi

A vertical rack which can host a Mac Mini, a Technicolor TC4400, Raspberry Pi 4 and a 120mm fan.Print Settings:<ul><li>0,15mm</li><li>no supports needed</li><li>print without Brim on a Prusa Mini</li></ul>&nbsp;Mac mini stand is inspired by <a href="https://www.printables.com/model/116060-apple-mac-mini-stand" rel="nofollow">https://www.printables.com/model/116060-apple-mac-mini-stand</a>

Vertical Rack for Mac Mini, Cable Modem and Raspberry Pi + 120mm fan

风扇

erer2001

The case is 5.4 liters.It's shaped like a cube because it can easily be printed on basically any printer&nbsp;COMPATIBILITY:<ul><li>Mini ITX motherboard</li><li>Single slot low profile PCIE card</li><li>70 mm CPU cooler clearance (Arctic passive & AMD Wraith Spire will fit)</li><li>SFX and SFX-L PSU</li><li>2.5" ssd under where the PSU cable exits (When using a SFX PSU)</li></ul>&nbsp;EXTRA MATERIAL NEEDED:<ul><li>x14 (min x12)* m3 brass heat insert. The hole I designed is 4.25mm in diameter</li><li>x4 standard 6mm motherboard standoff</li><li>x4 PSU screw</li><li>x4 Motherboard screw</li><li>x8-10* m3 screw for the front and back panel</li></ul>*the back panel has 6 screw hole but 2 are extra&nbsp;All parts can be printed with basically no bridging. Just orient the parts in the right wayThere's a square hole to fit a keyboard switch so it can be used as a power button&nbsp;The motherboard IO plate is a separate file. Cut the hole for your motherboard. (Stock IO plate is not supported because it require extra space on the top)&nbsp;There's also a blank side panel file. You can carve your own design.

ITX PC cube case with sfx PSU

机型

RETIRED GUY 3D PRINTING

Beer/Pop Can Opener/Protector SIMPLE PRINTED TWIST CAP USE ON YOUR BEER AND POP CANS TO KEEP NASTY SUMMER CREATURES OUT OF YOUR COLD DRINKS OPENS AND SEAL CANS FITS STANDARD 355M TAB CANS BEER AND SOFT DRINK CANS SHOULD FIT MOST CANSPOP THE CAN OPEN AND A SIMPLE TWIST AND ITS PROTECTED HAVE BEEN TOLD THAT THIS IS AN AWESOME TOOL FOR FOLKS THAT HAVE SOME HAND IMPAIRMENT IE (ARTHRITIS)&nbsp;Printed on Bambu X1 Carbon.20 layer heightSupports on build plate onlyArachne turned onNo brimPLA or PETG

BEER-POP-CAN OPENER-CAP-PROTECTOR-BUG FREE TOP

生活工具

MadMax3D

Check out my new and <a target="_blank" href="https://makerworld.com/en/models/105448#profileId-112537" rel="nofollow noopener">improved version</a> that also works with the A1 printer<figure class="image image_resized" style="width:9.01%;"><a href="https://makerworld.com/en/models/105448#profileId-112537" target="_blank" rel="nofollow noopener"><img src="https://lh3.googleusercontent.com/pw/ABLVV84lQ342EQyh0hZqx_iXGvAcjWcv7131s3yTuuwsw_Faa0WUlUW8RcZeHFm1LzoDIXkenJSzbeqA8HE8VwbGDU-9y6PrzgkDnnkOYXebyrxuh9qU5eXCGefzWEo1hbkuGKFQB6KmEMEuCk7o6xkkXHhUwdpJMS8gvowvODr53G8jxHVRfzp-UpLk6jpAOGx6wH7lVv0PGUhVDtp2IK6dcwx2g5AJYRFpFQtJUcB-ptKHCqNNhaUIUb-2s5Yj0VLF2NO51ExwVfzAC4VMjhBLAHwUHb1b1IP3OkWpsgWyoMcN0LXtXr876YLKzG2qvdfuG06fppFPZICjCmVWlF1yNGrhMK4eXb1mmIOyMKtbFGoJS9sxEUpkVSFkqF06lJGjSaRAANzVOl4WwnKt3vb0DiTvDbdH_En-PRPDCHyEGZe4rtrPFe_gDec5QU0l2-ur_EbYx83tMAlpdVMVdVJtYUJPxzd8QDTsc_L3ujbl6rcrtZsyO30BLajq4hp_U-m7zvrNYWCsGuBI5rUTHpiyR-iPJqjaJfyEhczQ-X3bHureGvtNl97O5ljGvaERjDpsmEbdpIEvf5v2dy5jurZ7zzLe4rzi2bBtq2ewpGR0mV8bceLp1r9HIjgQKIAPmdjic1zAhfkFmTHb3403eqO_fMOfzCU3bYgwp4OqGlz2gom1Bji11DITYsj_ai7090X0iSIjxkO-r6k0q6eFn_tod61i8qLBhAC4bUtQmTZpLu8V8pD4ucfVj4X5F3RX84rbop4FwsFEXx0QD_aQ9PNewjZgB3LPDIAeER9wJ8rE6MSwj0x8YSLec2zRXIVXNlUfqAaiLoXlrXe71gzGzdBsWeOcglVxWsZLAx0SSZaTli672YEU7mzswv5K2JLX3hLbG6SuR4GT-N8DBhskuT7G0C_gHQ3iawNawrRZkrjMQOWAM-6Ae2zG8AaNW5MhNVMKddko5-yWNTfcfhPu24svhpz_NUwiaaiOG0PHVjlwMEpP9Dg=w1276-h957-s-no-gm?authuser=0"></a></figure>Check out my lead screw cleaner for the <a target="_blank" href="https://makerworld.com/en/models/77336#profileId-81722" rel="nofollow noopener">A1 Mini</a>&nbsp;I was looking for a simple, hands-free way to clean the black soot off the lead screws on my X1C, MK3S and Prusa Mini. To use this cleaner, simply stuff some tissue, paper towel or sponge material in the cavity, douse it in IPA and clip it to the lead screw. Move the z-axis up and down. Be careful not to crush the cleaner between the top or bottom.I've included the Fusion file which has a “snugness” parameter called SNUG. This parameter adjusts the tightness of the fit and is set to .2mm in the .stl. It adjusts the distance between the inner faces of the clip portion. If the clip is too tight, reduce the snugness parameter to .1 or to 0.<a target="_blank" href="https://photos.app.goo.gl/rwRcAqLDimVnrqh19" rel="nofollow noopener">Video Bambu Front Screw</a><a target="_blank" href="https://photos.app.goo.gl/USkbGSJ66UxdCw7VA" rel="nofollow noopener">Video Bambu Rear Screw</a><a target="_blank" href="https://photos.app.goo.gl/EP9oCR47BrkFgzwYA" rel="nofollow noopener">Video MK3S Dual Cleaning</a>I printed it in PLA, .2mm layer height, no supports and no brim.&nbsp;Update 1 Per request for those without Fusion 360, I've added three new .stls with preconfigured snugness settings. Snugness refers to the distance between the inner faces so that it clips snugly onto the screw 8mm. Snug 0 = 8mm, Snug .2 = 7.8mm and Snug .4 = 7.6mm.&nbsp;Update 2 I have provided a configurator in OnShape to be able to create a model with your custom snugness setting between 7.4 and 8 mm. OnShape is a CAD program, much like Fusion 360, but you don't need to have a copy, or even an OnShape account. The design will open in a browser window where you can enter the desired value and generate your own model with custom snugness dimension. See “OnShape Lead Screw Customization.pdf” in the documentation section.

电子设备

宜家洞洞板

风扇

机型

生活工具

拓竹工具