outofmayo

jdicerchio

Bring back some nostalgia selling these firecracker popsicle keychains! Pairs great with the earrings in my profile.

Firecracker Popsicle Keychain

4th of July

Spice up your holiday attire this summer with these firecracker popsicle earrings! Smaller earring size available too or scale appropriately.&nbsp;&nbsp;&nbsp;Other earrings available here!&nbsp;Strawberry Earrings: https://makerworld.com/en/models/504789#profileId-420444Pencil Earrings: https://makerworld.com/en/models/504778#profileId-420433Orange/Lime/Lemon Earrings: https://makerworld.com/en/models/504776#profileId-420426Avocado Earrings: https://makerworld.com/en/models/504768#profileId-420418Watermelon Earrings: https://makerworld.com/en/models/498705#profileId-413337Firecracker Earrings: https://makerworld.com/en/models/477719#profileId-388811&nbsp;

Firecracker Popsicle Earrings - Large

Megan

Starchaser09

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;The Model is 180x114.81mm in size You may print at higher layer heights below the Min Depth of 0.64mm The Max Depth is 2mm and the Actual Depth is 1.9mm&nbsp;Filaments Used: PETG Creality Black Transmission Distance: PETG Tpoimns Gray Transmission Distance: PETG Creality White Transmission Distance: This print uses 3 unique filaments&nbsp;Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Gray At layer #13 (1.12mm) swap to White for the rest.

X-Wing Starfighter 1

Star wars

DopamineDesigns

by request, star wars inspired vader type wall outlet cover. &nbsp;commercial license available with suport.

vader style duplex cover 

for friends

TrendtB

🌟 Step into 2024 with the drip! This is a print-in-place design that's sure to turn heads. Ideal for party goers looking to bring some extra bling to their New Year's Eve celebrations. Download this unique design and be the envy of every 2024 party!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/256757/2023-12-11_5b7e505170045.gif"><figcaption>27" thicc chain for maximum drip</figcaption></figure>&nbsp;<h3>KEY FEATURES:</h3><ul><li>Print-in-Place Design: No assembly required, just print and flaunt!</li><li>Generous Length: A stylish and thicc 27” chain for a comfortable fit.</li><li>Striking Medallion: A standout 6” x 4.5” ‘24’ medallion for maximum impact.</li><li>Multi-Material Compatibility: Perfect for experimenting with various filament types.</li><li>Multi-Color Optimized: Designed for vibrant multi-color printing with minimal waste.</li></ul>&nbsp;<h3>CUSTOMIZATION:</h3>Mix and match filament colours! Try metallic type materials for the chain, or even glow in the dark! You can customize parts by assigning materials in Bambu Studio or Orca Slicer.<h3>PRINTING TIPS:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/256757/2023-12-11_dd7ea0c3aecd3.gif"><figcaption>Final print should pop straight off of your plate</figcaption></figure><ul><li>Print Settings: 0.2mm layer height. Take care if rearranging the plate to maintain the integrity of the chain links.</li><li>Plate: I had adhesion issues with the Textured PEI plate, and had more success with the PLA/Cool Plate + glue</li><li>Material Advice: Best printed in PLA for a balance of ease and detail.</li><li>Printing Challenge: Ensure precise extrusion calibration to avoid welding of chain links.</li></ul>&nbsp;<h3>WANT MORE?</h3>You might like some of my other designs! Go check them out.&nbsp;<figure class="image image_resized" style="width:56.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/256757/2023-12-06_912b2d538e1a4.jpg"><figcaption><a target="_blank" href="https://makerworld.com/en/models/84546#profileId-90385" rel="nofollow noopener">https://makerworld.com/en/models/84546#profileId-90385</a></figcaption></figure><figure class="image image_resized" style="width:55.59%;"><img src="https://makerworld.bblmw.com/makerworld/draft/256757/2023-11-24_760cf0b6bcdd1.jpg"><figcaption><a target="_blank" href="https://makerworld.com/en/models/72700#profileId-77228" rel="nofollow noopener">https://makerworld.com/en/models/72700#profileId-77228</a></figcaption></figure>

2024 27" Cuban Chain - Print-in-Place

2024

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

shoes

dakjones82

Bluey is a beloved show in our household and inspired this door-hanger decoration for our daughter's room. This model archives 3 different shades of orange using a single AMS unit and one single spool of orange filament by layering white and black behind the orange to achieve different shades. 6 colors with 1 ams! Enjoy!&nbsp;Colors Used:&nbsp;(Important note) Matte filaments do NOT work well for blending as they are much more opaque than standard PLA meaning they do not allow light/color to pass through.&nbsp;Hatchbox Orange (most standard orange filaments will work perfectly)Bambu PLA Basic: BeigeBambu PLA Basic: WhiteBambu PLA Basic Black

6 Colors 1 AMS Chillie Heeler (Bluey Mum) Door Hanger

Mother's day

planning

IDontKnow1988

I Love making Hueforge Pictures and I am going to upload more and more of them so follow me if you like my work and i would be happy if you give me a like :)&nbsp;You dont need an AMS . you can change manually the Filament if you want.&nbsp;If you want it smaller , dont change the height! only change x and y together ;)&nbsp;you can also use other Filament if you like&nbsp;&nbsp;Use my Settings for best Results.&nbsp;&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmFilaments Used:     PLA+ Sunlu Black Transmission Distance: 0.6     PLA+ Sunlu Red Transmission Distance: 6     PLA BambuLab Basic Orange Transmission Distance: 5     PLA BambuLab Basic Yellow Transmission Distance: 6Swap Instructions:     Start with Black     At layer #7 (0.72mm) swap to Red     At layer #14 (1.28mm) swap to Orange     At layer #20 (1.76mm) swap to Yellow for the rest.

HUEFORGE - Burning Hand multicolor

radiology 

Carlson

Minesota Wild NHL team logo keyring printed with original filament by Bambulab.

Minnesota Wild keychains

fandom

3DMN

Bunny Easter Shadowbox I used ws2812b LED strip, wemos d1 mini with WLED software. Recommended: 1. <a target="_blank" href="https://pl.aliexpress.com/item/32682015405.html?spm=a2g0o.productlist.main.7.11bf4a1098q40s&algo_pvid=1705aee3-7000-4ec9-b0fb-b2eb5dcc50cb&algo_exp_id=1705aee3-7000-4ec9-b0fb-b2eb5dcc50cb-3&pdp_npi=4%40dis%21PLN%2144.03%2117.55%21%21%2110.81%214.31%21%402103853f17090298390332208ee9fd%2112000026799811814%21sea%21PL%210%21AB&curPageLogUid=UGlX2Qs52oGU&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">LED WS2812B</a> 2. <a target="_blank" href="https://pl.aliexpress.com/item/1005006018009983.html?spm=a2g0o.productlist.main.1.7c837212I9hpuj&algo_pvid=1ef07aa0-57b2-49d1-bccb-99f195becdad&algo_exp_id=1ef07aa0-57b2-49d1-bccb-99f195becdad-0&pdp_npi=4%40dis%21PLN%219.74%212.00%21%21%2117.24%213.54%21%402103853617090299627234264e943d%2112000035516008095%21sea%21PL%210%21AB&curPageLogUid=U1iajg5KcEWd&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">Wemos D1 Mini</a>3. <a target="_blank" href="https://kno.wled.ge/basics/getting-started/" rel="nofollow noopener">WLED Project</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/667259/2024-02-25_39b37e9042f9.png"></figure>

Bunny Easter Shadowbox

Easter

3DXAV

Check my video:<figure class="media"><oembed url="https://www.youtube.com/watch?v=hFdkrrUByq8"></oembed></figure>&nbsp;Other videos:<a target="_blank" href="https://www.tiktok.com/@3dxav/video/7340605163985456390" rel="nofollow noopener">https://www.tiktok.com/@3dxav/video/7340605163985456390</a><a target="_blank" href="https://www.instagram.com/reel/C35IsrrrZqr/" rel="nofollow noopener">https://www.instagram.com/reel/C35IsrrrZqr/</a><a target="_blank" href="https://www.instagram.com/reel/Cx_ftW2PEmj/" rel="nofollow noopener">https://www.instagram.com/reel/Cx_ftW2PEmj/</a>&nbsp;How was made:&nbsp;&nbsp;<img class="image_resized" style="width: 100%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000141620/design/2024-05-20_ff297c54e7e1b.gif"> I designed my own Airless Basketball from scratch with its peculiar design with a honeycomb structure that does not need to be inflated, no valves and does not deflate.This version is not a replica. I modeled it from zero, taking inspiration from the original and making modifications that I considered pertinent.The diameter is 23 cm you can scale it if you wish.&nbsp;The best rebound results have been with PEBA-S Kimya as you can see in the gif in this post. Also you can test it with PLA Flex, it bounces more than TPU My Other Airless Models:<ul><li><a target="_blank" href="https://makerworld.com/en/models/141676" rel="nofollow noopener">AIRLESS BASKETBALL V2</a></li><li><a target="_blank" href="https://makerworld.com/en/models/223516" rel="nofollow noopener">AIRLESS AMERICAN FOOTBALL</a></li><li><a target="_blank" href="https://makerworld.com/en/models/208034" rel="nofollow noopener">Soccer Football Airless Ball</a></li></ul>&nbsp;<h2>SUGGESTED MATERIALS: I&#39;ve seen many impressions of my Airless Ball&#39;s prototype and I can list the filaments with the best results in rebound and resistance, according to personal tests and feedback shared by the community:  </h2><ol><li><a target="_blank" href="https://www.kimya.fr/en/product/3d-peba-s-filament-kimya/" rel="nofollow noopener">KIMYA PEBA-S</a> (personally tested) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000141620/design/2024-06-21_e9475b9e75071.gif">  </li><li><a target="_blank" href="https://ataraxiaart.com/?product=ataraxia-art-flexible-pla-filament-1-75mm-3d-printer-filament-1kg-spoolbetter-than-tpu89a-shore-hardnesspatent-formulacompatible-with-bowden-extruderwith-filament-storage-bag-fpla-slate-gray" rel="nofollow noopener">ATARAXIA ART</a> Flexible PLA  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000141620/design/2024-03-05_a5f624f4dcfe3.gif">  </li><li><a target="_blank" href="https://www.sainsmart.com/products/gt-3-flexible-pla-filament" rel="nofollow noopener">SaintSmart GT-3 High Flowability Flexible PLA Filament</a> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000141620/design/2024-03-02_61bab51abbecc.webp">   </li><li><a target="_blank" href="https://spectrumfilaments.com/en/filament-types/pla-en/" rel="nofollow noopener">Spectrum PLA </a> (not bounce) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000141620/design/2024-06-14_349034595e92e.png">  </li><li><a target="_blank" href="https://spool3d.ca/flexible-pla-1-75mm-3d-printer-filament/" rel="nofollow noopener">Spool3DCA PLA Flex</a> <a target="_blank" href="https://spool3d.ca/flexible-pla-1-75mm-3d-printer-filament/" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000141620/design/2024-03-02_8be1955631815.gif"></a>  </li><li><a target="_blank" href="https://overture3d.com/collections/overture-super-pla" rel="nofollow noopener">Super PLA + Overture</a> Super PLA+ by Overture excels in printing smaller ball versions, avoiding fracture risks. Its excellent bounce makes it perfect for smaller models, offering enhanced durability and fun. In larger models, it may encounter strength issues, only print small. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000141620/design/2024-03-06_f6d89282f7fd7.gif"> Disclaimer: None of these brands sponsor me</li></ol>&nbsp;&nbsp;&nbsp;&nbsp;

AIRLESS BASKETBALL V1

sports

3Deekes

&nbsp;Another “Art Deco” Hueforge , this one is the one and only Mickey Mouse :) Great thing to print for your friends who like Disney&#39;s mascotte.&nbsp;I went for a “golden age” color-feel for this one and I think it worked out pretty well. As always, if you guys find/use another color combination be sure to post some pictures as I love to see what other people come up with!&nbsp;The dimensions are 180x180 mm so it fits nicely in a square frame . &nbsp;I also made a frame you can print to use for this and my other Hueforge models :&nbsp;<a target="_blank" href="https://makerworld.com/en/models/194571" rel="nofollow noopener">https://makerworld.com/en/models/194571</a>&nbsp;The colours I used Black (Elegoo)→ Orange (Elegoo)→ Yellow (Elegoo)→ White (Elegoo)&nbsp;The plate is now 180x180 but you could resize to bigger or smaller, just make sure you do not change the height (Z) so uncheck “uniform scale” when resizing.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000181440/design/2024-01-29_64ef9f2438798.png"></figure>&nbsp;If you want to slice the file manually for use without AMS or other printer please use these settings :&nbsp;Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm&nbsp;Start with Elegoo Black At layer #10 (0.56mm) swap to Elegoo Orange At layer #26 (1.2mm) swap to Elegoo Yellow At layer #31 (1.4mm) swap to Elegoo White&nbsp;If you like the print would you please be so kind to give it a rating ? Thanks!&nbsp;Reminder : I share these works for free for hobbyists, you can even print them as gifts for friend and family.If you like my work: a Boost on Makerworld is always appreciated!&nbsp;Or if you want you could give me a tip or &#34;buy me a coffee&#34; on :  <a target="_blank" href="https://ko-fi.com/3deekes" rel="nofollow noopener">https://ko-fi.com/3deekes</a>&nbsp;If you are interested in selling any of my current and future releases send me a message to info@3deekes.be

Art Deco - Mickey Mouse

Rachel

Black Jack

This is an old school type of fire engine based on the <a target="_blank" href="https://www.printables.com/model/638666-yellow-artillery-tractor-chassis" rel="nofollow noopener">Yellow Artillery Tractor Chassis</a> model that I have released earlier. In that release itself I have explained how it is the universal platform on which various payloads can be added for specific function. This release contains the fire engine payload of the same.&nbsp;I am very thankful to <a target="_blank" href="https://www.printables.com/@BenoitLussier" rel="nofollow noopener">Mr Benoît Lussier</a> for his feedbacks which has helped me refine the model further. <a target="_blank" href="https://www.printables.com/model/693234-yellow-artillery-tractor-fire-truck-with-movements/comments/1409836" rel="nofollow noopener">Please Click Here to check out his make</a>&nbsp;<figure class="image image_resized" style="width:54.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/767907/2024-01-02_2fd7b34f59ec8.gif"></figure>&nbsp;If you have already downloaded and printed <a target="_blank" href="https://www.printables.com/model/638666-yellow-artillery-tractor-chassis" rel="nofollow noopener">Yellow Artillery Tractor Chassis</a> model, You would only need "Yellow AT Fire Truck Payload.3mf" file and Please skip to the title ASSEMBLY OF PAYLOAD.<figure class="image image_resized" style="width:44.44%;"><img src="https://makerworld.bblmw.com/makerworld/draft/767907/2023-12-25_rj39byqc9ztw.gif"></figure><h3>There are three ways to print this.</h3><ol><li>As single piece:- Please download STL file but there wont be any movements.</li><li>Multiple Pieces :- Download 3mf file with Full_dismantled.3mf.BEST QUALITY OUTPUT. Please use the 3mf file for assembly also. CHECK EASE OF PRINTING TITLE BELOW</li><li>Combined:- You may use any 3D viewer software like 3D builder in windows to merge components according to your printer and filaments. The sky is the limit for this. You may find a sample file ending with combined.3mf.</li></ol><blockquote>If you want to try TPU for tracks, you can download the "AT FireTruck TPU Tracks" which has the tracks and gears. You will need to replace all the gears and pinions in PLA version with the provided gear for TPU track working. but please note that I haven't tested them.</blockquote><h3>ASSEMBLY OF CHASSIS</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/767907/2023-12-25_90j8dfizni15.gif"></figure><h3>ASSEMBLY OF PAYLOAD</h3>Follow the GIF for assembly of payload.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/767907/2023-12-25_pqsexjh5yv9m.gif"></figure><h3>MATING WITH CHASSIS</h3>Follow the GIF for mating of payload with truck chassis. You can reuse the nut and bolt securing the Bed in the <a target="_blank" href="https://www.printables.com/model/638666-yellow-artillery-tractor-chassis" rel="nofollow noopener">Yellow Artillery Tractor Chassis</a> model to secure the payload. But you have to glue the nuts to the payload bed as shown in instructions.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/767907/2023-12-25_o6lw2hcicnog.gif"></figure><h3>Movements Included</h3><ol><li>Engine Bay Cover Swing Open</li></ol>NOTE The tolerances to some elements are zero which has been intentionally provided to friction lock the elements while not in movements. You may have to fine tune the tolerance from your end using scaling function in slicer to ensure good fit without compromising movements. This also applies for the pins that make rotation possible between elements. Please proceed with printing all the pins after testing printing a pin and testing the fit of a joint. You should be able to find the adequate scaling factor with this.&nbsp;Appreciate the makes uploads. Open for suggestions.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/blackjack123" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/693234/rich_content/68eff536-43c1-46ba-9e0c-f0744ca72906/image.png#%7B%22uuid%22%3A%22cd7c9786-cc79-4883-b801-ec717ea024bb%22%2C%22w%22%3A260%2C%22h%22%3A73%7D"></a> <a target="_blank" href="https://www.patreon.com/BlackJack123" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/767907/2024-02-10_677a07afa4c6d.jpg"></a>

Yellow Artillery Tractor Fire Truck with Movements

models

3DMakeryDE

My contribution to valentines day :)&nbsp;If you want to help me out/support my work, please consider rating the print profile. Unfortunatly there is an unjustified bad reating. This profile was already used over 40 times and works!Thank you!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/530183/2024-01-31_1cfc1c8d801af.jpeg" alt="Spooks Blank Template - Imgflip"></figure>&nbsp;

Skeleton heart hands gesture

FrozenNorth

Minnesota Wild Light Box sign use it either way. Has a hanger on the back to hang on the wall and a hole on the bottom to run your LED's. Print Face down for best results.

Wild Hockey Sign

hockey

jakubhroch

The Hobbit coaster

Sarah

LucyPrint

Minnie and Mickey's Valentine's Day box, for rings, jewelry, cream etc.3D printing is currently underway, I'll post the pictures of the print tomorrow morning.&nbsp;Update 22.01.2024As promised, here are the pictures of the finished print

Minnie and Micky Valentine Day

Valentines day

vandragon_de

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/264877/2023-11-22_d274e800e52f2.jpg"></figure>The model represents the Seiffen Church, or as it is officially called, the Seiffen Mountain Church, and is an Evangelical Lutheran church in the municipality of Seiffen in the Erzgebirge district of Saxony. It is the town's landmark and a popular motif in Erzgebirge folk art. It was built from 1776 to 1779 according to the plans of Christian Gotthelf Reuther, who took the Dresden Frauenkirche as his model. The church is depicted in many Erzgebirge Christmas motifs and can therefore be found in many German households in various forms.&nbsp;In the instructions you will find a brief overview of how all the parts are put together.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/264877/2023-11-22_bf8edb84ed961.jpg"></figure>

Bergkirche (church) Seiffen

Christmas

chiz_m

<h3>INTRODUCTION</h3>This is a 3d printed skull candleholder with eyes that follow you regardless from which angle you look at the skull (except from its back, of course). You can use <a target="_blank" href="https://www.walmart.com/ip/Halloween-Flameless-Black-LED-Tealight-Candles-4-Count-Way-To-Celebrate/2281808569?fulfillmentIntent=In-store&athbdg=L1103&from=/search" rel="nofollow noopener">LED tea lights</a> for illumination&nbsp;See it in action!<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/libyD2FYcEQ"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=libyD2FYcEQ"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/libyD2FYcEQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure><h3>PRINTING INSTRUCTIONS</h3>Print the skull with supports. Candle and eyeball parts do not require supports.&nbsp;WARNING: Be careful removing the supports from the eye socket since it's thin.&nbsp;<h3>ATTRIBUTION</h3>Skull model used for this is <a target="_blank" href="https://www.thingiverse.com/thing:2964867" rel="nofollow noopener">edoubleb's Hollow Skull w/ Shattered Occipital Bone</a>

Lighted skull w/ eyes that follow

Halloween

Sitsero

Mystical Unicorn Multicolor 3D Lightbox - Create Your Rainbow Wonderland!Step into a world of wonder with our Mystical Unicorn 3D Lightbox, a magical creation that invites you to craft your very own rainbow wonderland. This digital file allows for up to six different colors, enabling you to customize the hues and bring the enchantment of unicorns to life in your unique style.Key Features:Up to Six Customizable Colors: Unleash your creativity! The Mystical Unicorn 3D Lightbox offers a spectrum of up to six colors, providing the flexibility to design a captivating display that mirrors your individual taste and imagination.Wall-Mountable Elegance: Infuse charm effortlessly! Thoughtfully designed to be wall-mountable, this lightbox adds an elegant touch to bedrooms, playrooms, or any space yearning for a dash of magical allure.Tape Mounting Simplicity: Simplify the magic! Mounting the Mystical Unicorn 3D Lightbox is a breeze with the use of tape, ensuring secure installation and allowing your unicorn to radiate its charm effortlessly.Kid-Friendly Enchantment: Tailored for the young and young-at-heart, the Mystical Unicorn Lightbox is a delightful addition to bedrooms or play spaces. Its whimsical design and customizable colors make it an ideal gift for birthdays, holidays, or any special occasion.Craft Your Rainbow Escape:Embark on a journey of whimsy with the Mystical Unicorn 3D Lightbox. With up to six customizable colors, a wall-mountable design, and easy tape installation, this lightbox promises to infuse your space with a personalized spectrum of enchantment. Share the magic, like, and rate the model to spread the joy of creating your very own rainbow escape! Don&#39;t forget to post a make and showcase the mesmerizing world you&#39;ve brought to life! Check out the Wall Art version <a target="_blank" href="https://makerworld.com/en/models/160485#profileId-176171" rel="nofollow noopener">here</a> and bring a touch of fantasy to their surroundings!&nbsp;Enjoy my designs? <a target="_blank" href="https://www.buymeacoffee.com/sitsero" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000121065/design/53b598a9-37a8-48e8-9f7e-14b1bc71aff9.png" alt="Buy Me A Coffee"></a>

Unicorn Lightbox

for grandkids

miak3D

This is a filament painting of bigfoot fishing in a lake. It was made by using Midjourney. Printed at 200x200 @ 3.2mm&nbsp;<a target="_blank" href="https://www.youtube.com/watch?v=EV7jYAKugjY" rel="nofollow noopener">As seen in 3D Printing Nerds new HueForge video!</a>&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used:&nbsp;PrintBed BlackPrintbed WhitePrintBed GrayPrintBed OrangeProtoPasta Partly Sunny Yellow Swap Instructions: Black until layer #6 at 0.56mm Gray until layer #15 at 1.28mm Orange until layer #22 at 1.84mm Pure Yellow until layer #26 at 2.16mm White for the rest.

Bigfoot in Nature #2 - HueForge

Rivian

Manuel-P

Yes, I know there are already a number of light boxes here, but not all of them appealed to me in terms of size and construction, which is why I recreated all of them and used them to the maximum of the print bed. There will be more covers for the rear which contain a battery compartment etc. Lid one is equipped with a hole for a cable, two holes for hanging and a hole for centering. I'm going to create a complete wall for my son with all of them containing an XXL Paw Patrol logo (large printing plates) in the middle (will follow here).Nicer result with 2 mm nozzle.Remove the purge lines before printing, otherwise they may be in the model.&nbsp;I installed this COB LED: <a target="_blank" href="https://www.amazon.de/dp/B0CFVCX78W?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.de/dp/B0CFVCX78W?ref=ppx_yo2ov_dt_b_product_details&th=1</a>&nbsp;Deckel 2 with battery compartment and switch, printed in PETG and PLA as support interface. I used M3 threaded sleeves to attach the battery cover. I used these battery compartments: <a target="_blank" href="https://www.amazon.de/dp/B0C2Q41DTT?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.de/dp/B0C2Q41DTT?ref=ppx_yo2ov_dt_b_product_details&th=1</a>For this you need a 5v LED strip and these switches: <a target="_blank" href="https://www.amazon.de/dp/B08CY41YT5?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.de/dp/B08CY41YT5?ref=ppx_yo2ov_dt_b_product_details&th=1</a>&nbsp;Deckel 3 for a battery compartment with remote control. Just attach the front part a little with hot glue so that you can open it again to change the battery. The remote control works through the front. The lid is intended for this battery compartment with LED strips: <a target="_blank" href="https://www.amazon.de/dp/B08QCMFJW8?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.de/dp/B08QCMFJW8?ref=ppx_yo2ov_dt_b_product_details&th=1</a>&nbsp;Filaments used:Bambu PLA Matte CharcoalBambu PLA Matte Ivory WhiteBambu PLA Basic BeigeBambu PLA Basic BrownBambu PLA Basic GelbBambu PLA Matte Lemon YellowBambu PLA Basic PinkBambu PLA Basic Silver

Paw Patrol Rubble Lightbox

toys

fb-artwork

A miniature for tabletop players showing a human male monk.The miniature comes in 3 variations:&nbsp;- with round base (_rb)- with square base (_sb)- with hexagonal base (_hb)&nbsp;The printprofiles contain minimal support, that is easy to remove.&nbsp;Feel free to click the like button if you enjoy my miniatures.Support me and become part of the club on steady: <a target="_blank" href="https://steadyhq.com/fb-artwork" rel="nofollow noopener">https://steadyhq.com/fb-artwork</a>

DnD Miniature Human Male Monk

gaming

hanysX

You all know and love the Star Wars Universe! Immerse yourself with this one-of-a-kind astromech seen regularly throughout Star Wars Skywalker Saga! Simple print, you can scale down to 25% for a desk topper or keep it at the provided scaling for an awesome room decoration! Supports are suggested!

Star Wars R2-D2

geeky

Jasonuht

Have some fun with your friends or coworkers. Let them know that they beat the odds and became the person they are today with this silly little award.Printed at 200% of the original design.AMS for color swap with a total print time of 2h 37m.

Strongest Swimmer Award

funny

vitaprint 3D

This is a perfect Box for your Bambu Lab Spare Parts. I made all Bambu Lab printer Models to a Lid Design.You need foloowing Screws to complete it:&nbsp;<ul><li>M3 x 30 = 4 pcs (for the Hinges)</li><li>M3 x 35/40 = 2 pcs (for the Handle)</li></ul>&nbsp;Big Box:230 x 210 x 70<a target="_blank" href="https://makerworld.com/en/models/105260" rel="nofollow noopener">https://makerworld.com/en/models/105260</a>230 x 210 x 140<a target="_blank" href="https://makerworld.com/en/models/92348" rel="nofollow noopener">https://makerworld.com/en/models/92348</a>&nbsp;Small Box:175 x 130 x 110:<a target="_blank" href="https://makerworld.com/de/models/97173" rel="nofollow noopener">https://makerworld.com/de/models/97173</a>175 x 130 x 70:<a target="_blank" href="https://makerworld.com/de/models/408354" rel="nofollow noopener">https://makerworld.com/de/models/408354</a>

Bambu Lab Box L A1 Mini / P1S / A1 / P1P / X1C

storage

XentoBi

<h2>MODEL DESCRIPTION</h2>This model represents an enhanced version of the initial design while maintaining identical functionality. In this remix, a strategic removal of the rear wall minimizes material usage, and adjustments to overhangs have been made for improved printability.For optimal results, I highly recommend utilizing a brim during the printing process to prevent any instability in the heel section.In the accompanying images, you&#39;ll find the recommended orientation for printing, ensuring a seamless fit without the need for scaling. While adjustments may be necessary to align the object precisely, some users have reported successful results by scaling it down to 95%.Extensive testing, including compatibility checks with the X1C, confirms seamless integration with this remodeled version. It&#39;s worth noting that, similar to the original model, this remix maintains compatibility with the P1P even without an enclosure, offering users a consistent and reliable experience.&nbsp;If you want offer me a coffee: <a target="_blank" href="https://paypal.me/MCermaria" rel="nofollow noopener">https://paypal.me/MCermaria</a>&nbsp;<h2>DESCRIZIONE DEL MODELLO</h2>Questo modello rappresenta una versione migliorata del progetto iniziale pur mantenendo la stessa funzionalità. In questo remix, la rimozione strategica della parete posteriore riduce al minimo l&#39;utilizzo del materiale e sono state apportate modifiche alle sporgenze per migliorare la stampabilità.Per risultati ottimali, consiglio vivamente di utilizzare una falda durante il processo di stampa per evitare qualsiasi instabilità nella sezione del tallone.Nelle immagini allegate troverai l&#39;orientamento consigliato per la stampa, garantendo una perfetta aderenza senza necessità di ridimensionamento. Sebbene possano essere necessarie modifiche per allineare con precisione l&#39;oggetto, alcuni utenti hanno segnalato risultati positivi ridimensionandolo al 95%.Test approfonditi, compresi i controlli di compatibilità con l&#39;X1C, confermano la perfetta integrazione con questa versione rimodellata. Vale la pena notare che, simile al modello originale, questo remix mantiene la compatibilità con il P1P anche senza custodia, offrendo agli utenti un&#39;esperienza coerente e affidabile.

BambuLab Poop Bin for Filament Purge (p1 x1 trash)

Bambu accessories

mopar2511

The Ultimate Lego Sorting Trays! All compartments have rounded bottoms to make it easier to grab small pieces. The Lego pattern section is great for holding partially completed items or mini figs. Two sizes available depending on your needs.

Lego Sorting Trays

lego

jadamsowers

I got a MagSafe charger for my car that fits in my vents. I wanted a way to neatly run the cable down to the 12V USB adapter in the console and came up with this. It works really well with the <a href="https://www.printables.com/model/356217-cable-clip-for-car-vent" rel="nofollow">cable clip for the vent</a> I also designed.I've included the <code>.f3d</code> file so you can edit the parameters to fit your car's trim and cable thickness.

Cable Clip insert for car trim

automotive

tonyst

25mm Trim removal tool for getting the plastic trim clips off cars. It has 25mm width, 5mm thickness and a 5mm straight groove gap. Prints fine in PLA and for the first one i used supports and a brim before I realised they were on. it was fine, easy to break out and not much extra waste.Around 30mins print time at normal speed.&nbsp;no assembly required, once the trim button is in the groove, rotate tool whilst pulling rather than pull and lever.

Pry Tool 25mm for removing plastic Trim in Cars vans trucks

tools

SH Designs

This Christmas Nativity set is fun to print and assemble. Each of the 3 scenes consists of 3 flat panels and a curved base. Use an LED candle or fairy lights to illuminate the scene for a dramatic effect. Each panel is setup to print face down on the bed to produce a nice texture. This set makes a great gift and stores or ships easily in a flat padded envelope.&nbsp;Note: If you already printed the center scene from my previous model, it is the same as this. The 2 side scenes have been added to complete the full nativity set.&nbsp;For something else fun - check out the <a target="_blank" href="https://makerworld.com/en/models/61834#profileId-64260" rel="nofollow noopener">Home Alone scene</a> that fits this same base.&nbsp;