Oscar#78

Also check out my other printer accessory: the simplest poop container you'll ever need https://makerworld.com/en/models/119992&nbsp;A set of printable qr codes for your third party plates. use the top one (PLA/PETG/ABS/TPU/PC) for smooth plates and similar such as PEI, PEO, PEY etc, use the other one (PLA/ABS/PETG) for textured PEI platesI managed to print the text with a .4mm nozzle by setting the line width at .2mm, which is set in the included profile&nbsp;If it's too long on one side of the plate just cut it as i did in the photo

Bambu QR codes for smooth and textured plates

某阿某困

用于A1 / A1 mini 单机版，只使用上方一个插口时，其余插口裸露，容易进灰，出于防尘和美观可使用该零件，塞住对其余三孔，避免进灰。Used for the A1 / A1 mini standalone version, when only the top socket is used, the remaining sockets are exposed and prone to dust ingress. For dust prevention and aesthetics, this part can be used to plug the other three holes to avoid dust ingress.2.0版本：修正了原先打印过程中易松动的缺陷。Version 2.0:Fixed the original printing process&#39;s easy-to-loosen defect.

A1 / A1 mini 防尘塞 plug 2.0

A1 mini

3dcreativecustom

led light box10%- infillArachne - wall generator17% infill/wall overlap

kawasaki light 

kawa

led light box 10%- infill Arachne - wall generator 17% infill/wall overlap

Yamaha light  

Yamaha

Honda led light box 10%- infill Arachne - wall generator 17% infill/wall overlap&nbsp;&nbsp;

P1s

A1 mini

kawa

Yamaha

Honda