org-peace

MorphNest3D

<h2>Tiny Toad Tapper!!</h2>&nbsp;Tiny Toad Tapper is a fun, keyboard switch-based fidget toy. Simply click the cute toad for a satisfying tactile experience.&nbsp;Requirements: MX switch (recommended: Kailh Navy Box switches for their strong, satisfying click and heavy spring, but any MX switch should work).&nbsp;Note: The MX stem fits with a 90% success rate. If the fit is too loose due to under-extrusion, you can improve it by adding a piece of tape to the stem.&nbsp;Printing Details: This model is easy to print and requires no supports. A premade brim for the MX stem is included and can be easily cut off (see images).&nbsp;Print Settings: .12 Layer height, 15% infill, no brim, and no supports. For Commercial license of this model, become a member of my Patreon: <a target="_blank" href="https://www.patreon.com/MorphNest3D" rel="nofollow noopener">Patreon</a>

Tiny Toad Tapper!

解压玩具

franceschellifederico

Looking for a practical solution to label your cables? This 3D printable cable tag is your answer! Designed to provide a sleek and organized way to identify cables, this tag offers space to write names or labels, ensuring easy identification of cables in your setup.&nbsp;&nbsp;

Cable Tag

线缆工具

pbbence1994

A fairly accurate kit card model of a Bell 206B Jetranger helicopter.With it's beautiful multicolor paintjob looks good as desk decoration, but it can also serve as a fidget toy, because the props can spin pretty satisfiingly well. Cut the part out with pliers or nail sissors. The assembly is easy and self explanatory. Have fun printing it!&nbsp;

Helicopter Kit Card (Bell 206B Jetranger)

载具模型

Benjamin Kott

Drip Stand is a modern kitchen and bathroom utility to place your wet items on.&nbsp;It´s designed to guide the water dripping from the wet items to the sink, to help keep your countertops clear and water-free.&nbsp;DimensionsSmall: 9x10cm - 3.5x3.9in Medium: 9x15cm - 3.5x5.9in&nbsp;The feet are designed to be press-fit, print them at the height you need.

Drip Stand

厨卫工具

Pigi

The file includes both the keychain and the magnet. I used black for the backgorund becasuse i had no grey available. The inserts for the magnet on the back are for 8mm by 2 but you can use even smaller ones.

Fallout Vault 33 Keychain and Magnet

fallout 4

RestoreDoctor

Radius Gauge R1-30mmSimple tool for determining the radius. A must for being able to draw parts!&nbsp;Settings:<ul><li>0.20mm Standard </li><li>Infill 20 %</li><li>no support</li><li>PLA/ PETG</li><li>Use Multimaterial painting - Smart fill in Prusa Slicer. (Bambu Lab see below)</li></ul><figure class="image"><img src="https://media.printables.com/media/prints/578621/rich_content/fa528cba-7f9d-4977-a2a8-8de6a90157df/thumbs/cover/800x466/png/screenshot-2023-09-10-171052.webp"></figure>

Radius Gauge R1-30mm

测量工具

kenkamm

This is the best side spool holder, I think. I hope I am correct. It features:<ul><li>Improved roller assembly that prevents the spool from riding off the roller</li><li>Better rigidity thanks to a stiffening rib</li><li>Simple installation and removal of roller if needed</li><li>Threads for a PC4-M10 fitting that holds the PTFE tube securely, so you can push on the filament as needed when loading</li><li>Clearance around the bearing inner races so they don’t rub and cause friction</li><li>It looks good. :)</li></ul>Parts needed for this installation:<ul><li>M3 screws for mounting the printed parts to the printer</li><li>PC4-M10 fitting<ul><li><a target="_blank" href="https://www.amazon.com/BIQU-Straight-Pneumatic-Connector-Extruder/dp/B01IB81IHG/ref=sr_1_4" rel="nofollow noopener">https://www.amazon.com/BIQU-Straight-Pneumatic-Connector-Extruder/dp/B01IB81IHG/ref=sr_1_4</a></li></ul></li><li>2 ball bearings<ul><li><a target="_blank" href="https://www.amazon.com/dp/B07R7PR72H" rel="nofollow noopener">https://www.amazon.com/dp/B07R7PR72H</a></li></ul></li><li>You will need to extend your PTFE tube, you can use this piece with two PC4-M10 fittings to extend your PTFE tube:<ul><li><a target="_blank" href="https://makerworld.com/en/models/89430#profileId-97228" rel="nofollow noopener">https://makerworld.com/en/models/89430#profileId-97228</a> </li></ul></li></ul>&nbsp;Please note: The spool roller uses variable layer height to achieve a clean print with the steep overhang angle at the top. This is critical for success in printing the roller properly. If you use your own settings and don’t want to use variable layer height, be sure to print the roller with .1mm layers.&nbsp;Also note: Please use the smooth sheet to print this. It may not have enough adhesion with the textured bed unless you add a healthy brim.&nbsp;No supports are required for the filament guide and the spool holder. The roller should be printed upright and supports should be enabled for the print bed only.&nbsp;The filament guide and spool holder should be printed with 100% infill to maximize rigidity. The roller can be printed almost any way you want (except for the note about layer height above) but my settings are a good starting point.&nbsp;I hope you like my spool holder. If you leave a comment below, and there is something you don’t like, please mention how you would improve it.&nbsp;Happy Printing!

The Best Side Spool Holder (IMO)

P1S配件

我的妹妹最可爱

用极低的材料留下你用过的耗材，上面贴标签的尺寸是30mm x 20mm每个收纳盒前面部分留下一个小孔位可以打印你的耗材品类（pla、petg…)便于你快速挑选耗材，使用的磁铁是5mm x 1mm收纳盒左右两侧的磁铁是6mm x 2mm，我给大家模型里留带磁铁孔的，和一侧带磁铁孔的，方便大家组合上面的部分依次高度是0.8mm,0.6mm,0.4mm,0.2mm，方便你查看耗材情况&nbsp;Use very low material to leave your used consumables, the size of the label on the top is 30mm x 20mm.Leave a small hole in the front part of each organizer to print your consumables (pla, petg...) so you can quickly select the consumables, the magnet used is 5mm x 1mm.The magnets on the left and right sides of the organizer are 6mm x 2mm, I'll leave you a model with magnet holes and one with magnet holes on one side to make it easier for you to combine them.The height of the upper part is 0.8mm, 0.6mm, 0.4mm, 0.2mm, which is convenient for you to check the situation of the consumables.&nbsp;同时我还设计了另一款带盖子的收纳盒版本，以及色卡mini版本，大家可以根据自己的喜好进我主页进行挑选：I've also designed another version of the organizer with a lid, as well as a swatch mini version, so you can go to my homepage and pick it up according to your preference:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/604169/2024-02-29_f31231b2959e18.png"></figure>

耗材色卡+配套收纳盒 Color card

耗材色卡

3D造物主

舵机切刀v2见：https://makerworld.com/zh/models/379140&nbsp;&nbsp;具体测试见哔哩哔哩【voron sb头舵机切刀测试】https://www.bilibili.com/video/BV19A4m157Jf?vd_source=c7e963c712fcfe6c78b672060f20e54b项目地址https://github.com/tdft/Stealthburner-CW2-Stealthburner-CW2-servo-cut-tip传统喷头切刀使用喷头撞击撞块来切断耗材，容易导致xy电机丢步，即使切料后回零也会因为回零重复定位精度导致层纹，还会减少部分打印行程，使用舵机切刀完美解决如上问题，通多次顿刀测试和打印测试均没遇到问题。舵机使用es08md、mg90s均可。

voron CW2舵机切刀（）

SB头配件

3D servis

The stand is able to tilt according to your needsEasy print without supports nor glueTested with PLA and PETG&nbsp;If you have problem with print of worm, you can print profile worm - 2 parts.  It's without glue, only connect together with nuts&nbsp;Added bottom part with lower “horns”<img src="https://media.printables.com/media/prints/734305/rich_content/d1cc0fb7-688a-4ff4-a083-0ce6453751c8/thumbs/cover/800x488/png/snimek-obrazovky-2024-02-21-v-155507.webp">&nbsp;Upload new version for ipad (tablet) <a target="_blank" href="https://makerworld.com/en/models/216325" rel="nofollow noopener">https://makerworld.com/en/models/216325</a><img src="https://makerworld.bblmw.com/makerworld/draft/615791/2024-03-01_48bd1d4c76084.jpeg">&nbsp;

Adjustable phone stand

手机平板支架

Marc Elbichon

➡️ Checkout the entire <a target="_blank" href="https://makerworld.com/en/u/3864875302/collections/477489" rel="nofollow noopener">Ikea Skadis Collection</a> !&nbsp;Hi there! Here is some hooks for Ikea Skadis Panels!&nbsp;Enjoy!

Ikea Skadis Hooks

洞洞板配件

Makerspace.Online

A 3D printable Businesscard embosser, can be assembled without any hardware, everything just snaps together. I designed this businesscard embosser to be modular and 3D printable without using any support and without any hardware required to assemble. The tollerances are tight. And some materials work better then others. I have had best results using Basic PLA. Available patterns:3 Rollers available, more patterns can be found on <a target="_blank" href="https://makerworld.com/en/u/2755972568" rel="nofollow noopener">my makerworld page!</a> - Confetti - ZigZag - Polkadot Follow me on <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">my instagram</a> for updates on new patterns and uploads! Assembly:  (Pro tip: use some lubrication grease / vaseline around the gears for a better working!!) <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_cca5dc6403a79.png"> Make sure to allight the bottom gears maked with the dot and allign with the stipe.  Do not forget to add some lubrication / grease between and underneath the gears! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_d2c9531e7e588.png"> For the top gears some marks are present as well to allign the gears properly! Also here! Do not forget to add some lubrication / grease between and underneath the gears!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/2024-01-20_2b0339c954b2b.png"> Note:  This design is licensed under a <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons Attribution-Noncommercial-Share Alike</a> Please do not sell this file or printed product. <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">Instagram:</a> <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener"><img class="image_resized" style="width: 8.56%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000148536/design/a1ec037c-99fb-4f6f-9216-f4866257bed3.png" alt="Instagram, logo, social, social media icon - Free download"></a>

Business Card Embosser - Level up your cards! 

办公用具

TreeNB(亨利方)

This is a Manual Material Feeder (MMF) for people who has requests for supply materail from dry box or any other external material container. you can connect this feeder to printer by 4mm PTFE tube, then to insert filaments to this feeder and run the feeder by press the trigger time and time.There are several things you need pay attention.Addtional componets:1.Silicon rubber tube. The size shown below. (same size tube as the roller of my MMS. Inner diameter 14mm, outer diameter 18mm)<img src="https://makerworld.bblmw.com/makerworld/draft/510380/2024-02-04_72cc1690e8491.jpg">Two rubber tube put on to below two rollers.<img src="https://makerworld.bblmw.com/makerworld/draft/510380/2024-01-27_9cf47717abe72.jpg">2. 2 pieces of φ4*4Magnet put into below two places with some glue, and make sure they are attract each other.<img src="https://makerworld.bblmw.com/makerworld/draft/510380/2024-01-27_19a79e6793aca.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/510380/2024-01-27_8f71ecb5c813e.jpg">Then to assemble gear and trigger as below picture shown. make sure two dimple mark mate together.(please note that there is no any color at the place of dimple, below is just for you easily see it, so i paint red color on them. sorry for my poor camera)<img src="https://makerworld.bblmw.com/makerworld/draft/510380/2024-01-27_88821d33ef557.jpg">3. Rubber belt, it is just normal rubber belt, and don`t too tight.4. 7pcs of 2.2mm*6mm slef typing countersunk screw. 2.2mm is not accurate dimension. You just need to find a similar one, 2.5mm is also OK.&nbsp;Once everything ready. please assemble components as the way below video shown.<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1ri4y1H7rb/?share_source=copy_web&vd_source=686042c1d0a498840db169aa416a0328"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1ri4y1H7rb&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1ri4y1H7rb&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>It is better you use this MMF with My MMS. Infact, i`d like to say this MMF is a part of my MMS. They help you run your printing job more efficiently. see my video below, it show you how this two work.<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1Ka4y1C77q/?share_source=copy_web&vd_source=686042c1d0a498840db169aa416a0328"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1Ka4y1C77q&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1Ka4y1C77q&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

Manual Material Feeder送料器(MMF)

3D打印机料架配件

This is a customizable tool holder for every user. you can print any different size of unit. and assmble them together as my way shown below.The model i post is 6colums x 5layer size. it include:<ol><li>unit 1*1(20mm*20mm) 7pcs</li><li>unit 1*2(20mm*40mm) 2pcs</li><li>unit 1*3(20mm*60mm) 1pcs</li><li>unit 1*4(20mm*80mm) 2pcs</li><li>unit 2*2(40mm*40mm) 2pcs</li></ol>This is just a standard design that i made, but you can create your own combinations. and show picture here for people to referance.<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1ba4y1k7Hq/?share_source=copy_web&vd_source=686042c1d0a498840db169aa416a0328&t=15"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1ba4y1k7Hq&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1ba4y1k7Hq&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>This the Vertical version that i promised 1month ago.&nbsp;if you feel like my design please follow me and thumbs up!

Customizable Pen container

模块化工具盒

23盒子怪

所需物料 1.高硼硅玻璃筒一个直径 50mm高100mm厚5mm2.一块602040锂电池500mAh3.电阻一个5欧~10欧越小越亮4.TP4056充电模块一个type-c口5.开关一个SS12D00柄高4mm 2档3脚6.6mm球形磁铁一个或者钢珠7.4mm球形磁铁一个8.LED柔性灯条正负极同端3V长110mm一根9.M2X5自攻螺丝5颗10.3D打印外壳&nbsp;详细安装视频地址：https://www.bilibili.com/video/BV1PJ4m1b7Wz/?share_source=copy_web&vd_source=7826c049b720e76df1fd45f9e45aab75