opioka

MK Designs

Mesh Box (Gitterbox) used in transportationsnap-fit, but a little amount of glue is needed&nbsp;Available in standard scales 1/10 and 1/11 for personnel transporting garden railwaysscaling down to 1:14 should be possible with a little xy compensation&nbsp;

Gitterbox Mesh Box 1/10 scale

lustig 

Just Yoshi

A simple 100x100 top shelf for Ikea Skadis pegboards. The honeycomb pattern is generated in the slicer. The original model is solid. I printed it in PETG. &nbsp;I added a openSCAD model, so you can modify the tray to your needs.

Skadis Top Shelf

Skadis

Wiseone

The 4mm 3 wires Wago connector is a useful electrical fitting. Often, it needs to be secured to a base plate. Wago do have base clips, but inconvenient to get hold of. Here is my design for a quick solution.&nbsp;My mount accommodates two, three and five-way Wago 221 connectors. The connector securely clips into the mount with a positive "clip" sound. With a bit of care, the connector can be removed from the mount and remounted as you work.&nbsp;Wago 221 connectors have a rear access test point. My mount includes an opening which, if aligned with the test point provides clear access.My mount has a hole for a 6g (3.5mm) countersunk mounting screw. Other screw head types will interfere with the Wago fitting, so are unsuitable.&nbsp;I had good success in PETG and PLA+ printed mounts. I noticed that Wago's own mount system is made from PA66 (NYLON).Here is my 3D design. My design may match your needs, too.&nbsp;My print is made with eSUN PLA+ 1.75mm Orange filament, with 0.2mm layer height and 100% infill on a Bambu X1 Carbon printer. Print supports proposed when printing in the vertical direction.&nbsp;I hope that you can find this print useful, too.&nbsp;Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

Wago 221 Connector Universal Mount

Wago Klemmen 

Habitaritus

This beautiful tulip makes a wonderful table decoration for Easter or simply for the approaching spring. Of course you can also use the tulip as an egg cup for your guests like I did. They will love it!Color the tulip in your color and print out all 3 parts.Then glue the parts together using the dowel. A beautiful decoration is finished.&nbsp;Please don't forget to rate the model and have a look at my other models too :)

Tulip easter table decoration and egg cup

Ostern 

Salahunreal

A remix for a great Dremel holder <ul><li>I redesigned it a little bit to fit Ikea Skadis peg board using skadis universal hooks by <a target="_blank" href="https://www.thingiverse.com/thing:2853261/files" rel="nofollow noopener">https://www.thingiverse.com/thing:2853261/files</a></li><li>Use Skadis_Universal_Hook.stl from the collection. You will need 4 hooks. I added it in the 3mf file </li></ul>****UPDATED 2021-12-15There was some block inside the hole and has been removed from the updated stl file<h3>Print Settings</h3>Printer Brand:CrealityPrinter: CR10S PRORafts:NoSupports: NoResolution:200Infill: 20 but I suggest o increase it to 50 just in caseFilament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&field-keywords=Sunlu+PLA%2B" rel="nofollow noopener">Sunlu PLA+</a> Black&nbsp;I used PLA+ back then and it is sitll holding strong. Maybe PETG would be better but PLA+ still working fine for now&nbsp;&nbsp;&nbsp;Category: Tool Holders & Boxes

Dremel 4000 Skadis Ikea mount

Werkzeug und Zubehör

Valeria Momo

Cute Unicorn Lightbox with Name, Size: 20*19*3 cm. It has 2 holes at the back for hanging on the wall. I suggest using 5v led.The bottom file has pre-cut hole for led power wire in different sizes, both on the back and on the side.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802769/2023-11-19_c8d27404379f3.png"></figure><h2>How to “create” the hole for the USB cable</h2>Before printing, open the desired hole deleting the correct object in the side panel:&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/802769/2024-02-01_bdf8e74616537.png"><a target="_blank" href="https://youtu.be/p24IbgMJvOk" rel="nofollow noopener">Watch the video tutorial</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802769/2023-11-19_c8d27404379f3.png"></figure><h2>How to change the text</h2><figure class="media"><div data-oembed-url="https://youtu.be/R02ZWd5Q8ak"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/R02ZWd5Q8ak" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802769/2023-11-19_c8d27404379f3.png"></figure><h2>⚠️ ATTENTION ⚠️</h2><h3>Before printing, remember to face down the object  (reverse printing) and check for correct text slicing.</h3><h3>Before printing, slice and check! If on the first layer there is only the text it means that you did something wrong (i.e. you skipped the step at second 38 of my YouTube guide).</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802769/2023-11-19_c8d27404379f3.png"></figure><h2>Lightbox Desk Stand</h2>If you want to hang the lightbox on your desk or shelf, try my Lightbox Desk Stand, available in 3 different size:<ol><li><a target="_blank" href="https://makerworld.com/en/models/149905#profileId-163553" rel="nofollow noopener">Large (22 cm height ca.)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/202110#profileId-222510" rel="nofollow noopener">Medium (15 cm height ca.)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/202111#profileId-222513" rel="nofollow noopener">Small (10 cm height ca.)</a></li></ol><figure class="image image_resized" style="width:249.162px;"><img src="https://makerworld.bblmw.com/makerworld/draft/802769/2024-01-21_610e23f2afe3a.gif"></figure><h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model<a target="_blank" href="https://patreon.com/ValeriaMomo?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=creatorshare_creator&amp;utm_content=join_link" rel="nofollow noopener"> by joining the Commercial License in my Patreon</a>.

Cute Unicorn Lightbox with Your Name

Lampen

OlleMark

Updates:2024-01-26 - Added a lid with and without a notch.&nbsp;A large Stackable Storage Container i made by request. It is based on my bambulabs poop container.&nbsp;Dimensions: 245x124x125mm&nbsp;Printed with normal bambulabs settings but it can be printed with the draft profile if you want to make it a bit faster.

Stackable Storage Container 

Aufbewahrung

Heath

I saw this model and made it to accept a 4" tube for a laser engraver. The whole is 3 7/8" to give it some room. &nbsp;I printed this with 3 wall and 40% infill gyroid to give it some strength to be bolted down to a surface.

Mountable 4" Flat Exhaust Mount

Faserlaser

liljohn406

Easy print. Easy assembly. Only support needed on nameplate. &nbsp;I have updated my original model based on user comments and refining the original model. (Seen here <a target="_blank" href="https://makerworld.com/en/models/68029#profileId-72144)" rel="nofollow noopener">https://makerworld.com/en/models/68029#profileId-72144)</a> (This is still the same I used a led strip that is powered by USB and plugged it in the 5V plug behind the screen on my P1P/P1S. There are access holes on both sides to run cabling/led strip. Open pocket behind logo to stash some lights to illuminate it. Vents only on the sides with a sliding doors built in. Which are held down by the glass. Front logo is a seperate piece to save time and filament. Only two color changes this way opposed too many if it is part of the model. Picture was printed in Bambu Matte Black and Elegoo Neon green since Bambu has had filament stock issues lately) That one still works great, but since I created it in my earlier stages of learning modeling it was to difficult to make changes. &nbsp;So I decided to create a new one. What is different with this compared to the V1. Well I have made the tolerances around the logo nameplate better and also made it larger. I have moved the led strip from down low, to up higher on a ring that is now further out in the center. Helps keep the lights from shining in the camera. Plus more light. I have created a blank faceplate that you can add text too in Bambu Studio (or your preferred slicer) so you can have a custom nameplate if you don't want the included Bambu Labs one. I have also included two additional rear sections with holes in them if you use it on X1C and need to run your LED cabling out the back. Also the whole thing is about 5mm taller just to try and get the glass further away from the bowden tube. I didnt want to make it much taller.&nbsp;The way I assembled it by sanding the mating surfaces flat, just to get rid of the squish. Then i used a drop of glue on each hole on piece then inserted the pegs then put a drop a glue on the protruding pegs and assembled the two pieces together. Don't use too much just a drop, don't want it running out and ruing the outside of the print.  I just repeated the process until all 4 main pieces were assembled. Then I took it and put it on the printer and installed the glass top. I let is sit like that until the glue set up. That way it would dry square. The glass is tight at first but I have noticed with many of my PLA prints they tend to loosen up after a bit. Thanks again. &nbsp;**ALSO CHECK OUT MY RISER DRAWER SYSTEM HERE** https://makerworld.com/en/models/185440#profileId-204184&nbsp;Thanks again

Sliding Vents Riser With Led V2

JohnTrottoCreations

This is a jig for a fiber laser, to hold a variety of sized tumbler, cups and glasses into place, and level them.Holes are 50mm spacing (fits most standard fiber laser beds)