operation.remie

JamesThePrinter

Set of trees and trunks that work interchangeably. The pieces thread together. The set includes 3 trunks and 5 trees:Trunks<ul><li>Short Trunk</li><li>Tall Trunk</li><li>Tall Trunk - Textured</li></ul>Trees<ul><li>Spiral Tree</li><li>Lattice Tree</li><li>Scalloped Tree</li><li>Wavy Tree</li><li>Diamond Tree</li></ul>Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;<h4>Print Settings</h4>Trunks need no special settings. While the trees do not require any special settings, I recommend the following:Spiral Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>Manually move seams to the back side of each spiral. This will reduce curling of the leading edge.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/614179/rich_content/5faa24f8-ced8-45b5-83ef-2f7ad102d1ec/spiral.png#%7B%22uuid%22%3A%22cf03bb2c-3622-43a3-87f6-ed5c101cf626%22%2C%22w%22%3A1600%2C%22h%22%3A1200%7D"></figure>Lattice Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li></ul>Scalloped Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>0% infill for the rest of the tree</li></ul>Wavy Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>0% infill for the rest of the tree</li><li>Use the Classic perimeter generator - Arachne leaves some unwanted edges</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/614179/rich_content/1d56fb74-827a-44e7-ac40-975484e4d77c/wavy.png#%7B%22uuid%22%3A%2228f92ead-6d9a-44c4-aaa3-8459b69435ff%22%2C%22w%22%3A1600%2C%22h%22%3A1200%7D"></figure>Diamond Tree<ul><li>25% infill in the base and center threaded area - this adds weight to the bottom and keeps the tree stable after a trunk is added</li><li>0% infill for the rest of the tree</li></ul>&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:Spiral Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Prusament Simply Green PLA</li></ul>Lattice Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Bambu Lab Matte Dark Green PLA</li></ul>Scalloped Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Prusament Opal Green PLA</li></ul>Wavy Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Inland Lutz Green PLA</li></ul>Diamond Tree<ul><li>Bambu Lab Matte Latte Brown PLA</li><li>Prusament Mystic Green PLA</li></ul>

Christmas Tree Set

Christmas 

Edward Felix

This is a one sixth scale classic Dalek from Doctor Who!&nbsp;This is designed to be printed using a multi-colour 3D printer, such as a bambulab, prusa, or any of the new printers coming out with the ability to print with multiple materials at the time of writing. That said, if you want, you can put all the parts into a single colour printer and then paint after the fact, have fun.&nbsp;To assemble, each part has been split into pieces which correspond to different potential colours. So you bring in parts that have the same name except for the number at the end. To print the eye for example, you would want to bring in the following files: Dalek_Eye_colour_1.stl Dalek_Eye_colour_2.stl Dalek_Eye_colour_3.stl Dalek_Eye_colour_4.stl These don't have to all be assigned to different colours if you have a printer that can only print up to two colours, or if you want to remix how things are done. For example, in the pictured dalek, I only used black and grey for pretty much everything except the dome and eye, although you can use any colours or any number of colours that you want.&nbsp;Also included is the .3mf file from when I printed the dalek on my bambulab printer so you can see how I set it up and sliced.To assemble the dalek, it has been designed so that each section can bolt together using M3 nuts and bolts. There are two extra unused attachment points at the base of the dalek skirt, should you want to design some sort of interior or mechanical element of your own to allow for easy mounting.&nbsp;The dalek was designed at one sixth scale to match the figures made by Big Chief Studios. However, should you want it bigger at one fifth scale to match the larger Character Options figures, you can simply scale all the parts by a factor of 1.2, a one fouth scale dalek would need everything to be scaled up by a factor of 1.5. At these scales though, M3 bolts will not be the correct size to hold the dalek together, and you will need to source alternative fittings.

Christmas

my stuffs