omoltas

jimcorner

Here's improved flow calibration compared to Orca or Bambu Studio. This is the third iteration from the original models: <a target="_blank" href="https://makerworld.com/en/models/108065#profileId-115396" rel="nofollow noopener">Improved flow ratio (extrusion multiplier) calibration v1 by jimcorner - MakerWorld</a>, <a target="_blank" href="https://makerworld.com/en/models/179247" rel="nofollow noopener">Improved Flow Calibration v2 by jimcorner - MakerWorld</a>. The goal is to make flow rate calibration as straightforward as possible with a repeatable and clear standard.&nbsp;Please download the 3mf file and slice it yourself in Orca, the 3mf does not work with Bambu Studio bc it doesn't support per object flow ratio setting! As a result, the print profiles uploaded by other people here likely won't work.&nbsp;Why I upload this:<ol><li>the default flow calibration is bad at determining which flow rate has the smoothest surface with the monotonic top infill pattern, especially for white filaments. The result is often subjective.</li><li>There are too many test pieces to keep track of.</li></ol>What's improved compared with Orca/Bambu Studio:<ol><li>The result is now much more definitive and clear, I can even capture it with my phone camera as shown in the photos</li><li>The top surface is Archimedean Chords pattern instead of monotonic, and line width is increased to 0.6mm, making it much easier to tell which flow rate is the best and take out the guess work. All other settings are exactly the same as Orca Slicer/Bambu Studio flow ratio calibration, so the calibration print is set up similar to originally intended.</li><li>The test pieces are put together as one piece, instead of 10 smaller pieces that tends to clutter up space and easy to be lost.</li></ol>How to use this test:Prerequisite: open the 3mf file in orca slicer, and select the filament you want to calibrate.<ol><li>Pass 1: change the flow ratio in the filament tab to 1.0. Once that's set correctly, the flow ratio of the 7 pieces are: 1.12, 1.08, 1.04, 1, 0.96, 0.92, 0.88. Slice plate 1 named “rough”, and print. Find the flow ratio right before the raised right half circle appears, as flow_rate_rough. Usually this number is around 1.0, and if you know the ballpark number, you can use that value and skip this step.</li><li>Pass 2: change the flow ratio in the filament tab to flow_rate_rough from pass 1. Slice and print the second plate named “fine”. Going from bottom to top, find the second flow ratio that gives the raised right half circle, as captured in the photos above. This is the optimal value to use for future printing.</li><li>Optional: If there are fewer than two pieces with the raised right half circle, repeat pass 2 with increased value for flow_rate_rough.</li></ol>&nbsp;Notes: in pass 2, the flow ratio of the 7 pieces are: [1.03*flow_rate_rough, 1.02*flow_rate_rough, 1.01*flow_rate_rough, 1*flow_rate_rough, 0.99*flow_rate_rough, 0.98*flow_rate_rough, 0.97*flow_rate_rough]. You can also see this in the per object setting → quality → flow ratio. The actual flow ratio when printing is the filament flow ratio value set in the filament tab * the scalar set in the per object flow ratio scalar.&nbsp;&nbsp;Why/how well this works:The optimal flow ratio should make the lines squish into each other to fill the gaps, but they should not be squished together too much because severe over extrusion creates ridges and uneven surfaces. The goal is to find the optimal flow ratio for the right amount of squishiness between the extrusion lines. Here the Archimedean Chords pattern and larger line width of 0.6 amplify the effect of between-line-squishiness by inspecting the raised right half circle. As the flow rate goes up from the bottom to the top of the test pieces, the optimal flow rate would be somewhere when the raised right half circles start to appear as it means the lines start to get squished together. To account for the test error bar and filament diameter variation, I choose the second visible raised right half circle for the optimal flow ratio. In my testing this gives a smooth top surface in my normal prints with minimal/no signs of over-extrusion. And the results I get is consistent with the values provided by the manufacturers as well, which gives me confidence as this method converges with manufacturers suggestions. For example, in the photos, the red filament is polylite pla which has 0.95 flow ratio recommended by polymaker, and my test gives 0.95. The white filament is sunlu pla+ has recommended 0.98 flow ratio and my test gives 0.98.&nbsp;

Improved Flow ratio Calibration v3

testy

sagatxxx

If you like my design please don&#39;t forget to give me a boost!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000150191/design/2024-04-18_0faffe0b88dc2.jpg">&nbsp;cable holder for cables with a maximum diameter of 5-6mm (half of the object with a separation for cables of 5mm and the other half of 6mm), it can be glued to the wall or held with screws, it has plenty of space for cables of various types (22 slots), where you can put and group several in each slot

Cable holder

dilna

hnogueras

Ghost Mask (COD MWII 2022)

masky

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

hydroponie

apex3D

Ludo is simple and fun game know under Ludo, Mensch ärgere Dich nicht, Man, Don't Get Angry or Člověče, nezlob se!&nbsp;I wanted to make nice, small, easy to print and assemble portable game…&nbsp;Model&nbsp;FEATURES<ul><li>Colorful even without AMS</li><li>3 different types of figures</li><li>Easy to print and assemble</li><li>No supports, flawless print</li><li>No glue, magnets or anything else</li><li>You might need a dice (so you have higher chance of that dice being true, if you do not care, you can just print one…)</li><li>124x124x22mm</li></ul>HOW TO PRINT?Choose my profile MULTICOLOR AMS or MULTICOLOR NO AMS. They contain all the parts you need but dice.<ul><li>Main Body</li><li>Lid</li><li>Color plate - center</li><li>Color plate - corner</li><li>5 figures of each color (you only need 4 but you know how it is…)</li></ul>Print in desired colors and you are good to go!&nbsp;ASSEMBLYIt is designed in a way that you do not need glue or magnets. It utilizes springy latch mechanisms, so you can replace them if you wish to print from different color.Print all main body and the lid. Then there are 4 sets of color pieces (figures + center and corner plates). Cut them apart with cutter and assemble main body with center and corner pieces.<figure class="image image_resized" style="width:50.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/592493/2024-02-27_ad4fdb71090e2.png"></figure><figure class="image image_resized" style="width:49.73%;"><img src="https://makerworld.bblmw.com/makerworld/draft/592493/2024-02-27_dc055dcaf7ef7.png"></figure>The lid also just snaps in a place when inserted to hold figures inside while traveling.<figure class="image image_resized" style="width:49.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/592493/2024-02-27_8824a1fc478b4.png"></figure>&nbsp;DIFFERENT FIGURES?I was playing with a design of figures to find what is the best fit so I ended up with 3 different options for you. By default profiles contain clearance type of figure.<figure class="image image_resized" style="width:48.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/592493/2024-02-27_d0049303ff65.png"></figure><ul><li>Clearance - good for most cases, fits quite nice into the board, but can fall of.</li><li>Friction - it is tapered and slightly oversized. This results in nice snug fit if desired.</li><li>Spring - ideal for when you want to travel, thanks to springy design they fit snugly yet they are easy to remove.</li></ul>&nbsp;HOW TO PLAY IT?Game Board and Setup:<ul><li>The game board consists of 40 spaces.</li><li>Each player has four game pieces, which start in the “Home” area.</li><li>The game pieces are placed in the four spaces on the left side of the board.</li><li>The colored space to the left of the center is the starting space for each player.</li><li>The white space to the right of the starting space leads to the player’s home row.</li></ul>Gameplay:<ul><li>Players take turns rolling a six-sided die.</li><li>The rolled number determines how many spaces a game piece can move forward.</li><li>Rolling a six allows a player to bring a piece into play (from the “Home” area to the starting space) and roll again.</li><li>If a piece is on the starting space and there are still pieces in the “Home” area, it must be moved out.</li><li>Pieces can jump over others and can knock an opponent’s piece back to their “Home” area.</li><li>Players cannot knock their own pieces or move beyond the last space in their home row.</li></ul>Winning Condition:<ul><li>The first player to get all their pieces into their home row wins the game.</li></ul>

Ludo - Portable Board Game (Mensch ärgere Dich nicht)

Jhos Fuentes

he monumental Christ the Redeemer statue in Rio de Janeiro is one of the most recognizable landmarks in the whole world, becoming a symbol of the city and Brazil.

Christ the Redeemer - Brazil

sochy

3DPrintCraft

My 9yr old son created this project. Its his first bigger, functional design made entirely in TinkerCad. Using various shapes for the build and for the internal cutouts and he even designed a spinnable toilet paper holder. The seat also is on hinges and can be lifted up or down. I helped him to separate some parts for ease of printing. They are easy to assemble. A touch of glue will be required to put couple of the pieces together. No support required even though the slicer may say so. We included a 3mf file we sliced on our X1C at 0.2mm layer height. If you like it please let us know, it will encourage my son in more projects.

Flushable Toilet Kit - Spits water out the back. 

nabytek do domečku

NUKDDD

Legend says that some chickens and bunnies had babies and that's where these adorable little hole-y eggs came from. People would go hunt for these eggs every spring, thus came the holiday called Easter…I made that up, it's actual about a bunny waking up after a long nap and losing the race to the tortoise and became an egg.&nbsp;Please give a 👍 if you like it, even if you don’t download it, it’ll help others discover it 😊Commercial rights available for all my designs at <a target="_blank" href="https://www.patreon.com/NUKDDD" rel="nofollow noopener">https://www.patreon.com/NUKDDD</a>&nbsp;These eggs will look great day and night by themselves or next to other decors.&nbsp;<a target="_blank" href="https://shrsl.com/4gf88" rel="nofollow noopener">Designed to fit Bambu Lab's Lamp Kit, available in the online shop.</a>&nbsp;Printed with Bambu's <a target="_blank" href="https://shrsl.com/4gfvl" rel="nofollow noopener">Basic</a> and <a target="_blank" href="https://shrsl.com/4gfae" rel="nofollow noopener">Matte PLA</a>&nbsp;No support, easy assembly, big one compatible with Bambu Lamp Kit 001 and small one for tea lights up to 40mm in diameter. Standard setting, except for the bases, they all have fuzzy skin turned on, default setting. You can support me by using my affiliate link to purchase <a target="_blank" href="https://amzn.to/3PxD8HO" rel="nofollow noopener">the LED candle</a> I purchased in my video and photos. I may earn a small commission.&nbsp;All you need is to bring your own light, nothing else is needed, like most of my designs. Check them out in my profile!&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

Easter Bunny Egg Lamp 

velikonoce

Lukas Pomykal

Size: Diameter: 100 mm Height: 100 mm Wall thickness: 2 mm <a target="_blank" href="https://makerworld.com/en/models/27094" rel="nofollow noopener">Spiral flower pot</a><a target="_blank" href="https://makerworld.com/en/models/27094" rel="nofollow noopener"><img class="image_resized" style="width: 30.29%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000027113/design/2024-06-09_42de57cce3ba.png"></a>&nbsp;<h2><a target="_blank" href="https://makerworld.com/en/models/27092" rel="nofollow noopener">Spiral flower pot</a></h2><a target="_blank" href="https://makerworld.com/en/models/27092" rel="nofollow noopener"><img class="image_resized" style="width: 30.16%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000027113/design/2024-06-09_b9cd524d852e1.png"></a><h2><a target="_blank" href="https://makerworld.com/en/models/27075" rel="nofollow noopener">Modern geometric flower pot | planter 100x70 mm</a></h2>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/27075" rel="nofollow noopener"><img class="image_resized" style="width: 24.14%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000027113/design/2024-05-16_1c27a7638902e.jpeg"></a>&nbsp;<h2><a target="_blank" href="https://makerworld.com/en/models/27078" rel="nofollow noopener">Modern geometric flower pot |planter 120x80 mm</a></h2><a target="_blank" href="https://makerworld.com/en/models/27078" rel="nofollow noopener"><img class="image_resized" style="width: 24.73%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000027113/design/2024-05-16_8ab4a71071862.jpeg"></a>&nbsp;<h2><a target="_blank" href="https://makerworld.com/en/models/27097" rel="nofollow noopener">Geometrical flower pot 90x90 mm</a></h2><a target="_blank" href="https://makerworld.com/en/models/27097" rel="nofollow noopener"><img class="image_resized" style="width: 27.46%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000027113/design/2024-06-09_05d65222d063e.png"></a>&nbsp;<h2><a target="_blank" href="https://makerworld.com/en/models/27113" rel="nofollow noopener">Geometrial flower pot 100x100 mm</a></h2><a target="_blank" href="https://makerworld.com/en/models/27113" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000027113/design/2024-06-09_14bb571aa8703.png"></a>&nbsp;<h2><a target="_blank" href="https://makerworld.com/en/models/27138" rel="nofollow noopener">Ikea Skadis planter pot</a></h2><a target="_blank" href="https://makerworld.com/en/models/27138" rel="nofollow noopener"><img class="image_resized" style="width: 37.13%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000027113/design/2024-06-09_a25d7aca53848.png"></a>&nbsp;<h2><a target="_blank" href="https://makerworld.com/en/models/27303" rel="nofollow noopener">Voronoi flower pot 80x80mm</a></h2><a target="_blank" href="https://makerworld.com/en/models/27303" rel="nofollow noopener"><img class="image_resized" style="width: 37.87%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000027113/design/2024-06-09_356da70b03b35.png"></a>

Geometrial flower pot 100x100 mm

kvetinace

KefmaDE

"4 IN A ROW" is a strategic two-player board game, also known as "Connect Four." The game board consists of six rows and seven columns, where players take turns dropping their tokens. The objective is to be the first to connect four of one's own tokens horizontally, vertically, or diagonally. Players must strategically plan their moves to either create their own four-in-a-row or simultaneously block the opponent. I designed the game in a compact box, making it convenient for on-the-go or travel gaming.

4 IN A ROW - Travel Edition

ABDELat

Upscaled version of Elements <a target="_blank" href="https://rebrickable.com/parts/3741/" rel="nofollow noopener">3741</a> and <a target="_blank" href="https://rebrickable.com/parts/3742/" rel="nofollow noopener">3742</a>. Its designed to be roughly 15cm high (~831%). A print profile with a smaller version is also available. Its a fixed high polygon version ready to print. The Model is generated from the LDraw data files (<a target="_blank" href="https://library.ldraw.org/official/6815" rel="nofollow noopener">3741a</a> and <a target="_blank" href="https://library.ldraw.org/official/6822" rel="nofollow noopener">3742</a>)&nbsp;The flower stem can be printed with default support without any problems.The flowers scan be printed all with the same color, or in 3 different colors with the AMS.&nbsp;The flowers are scaled 101% so they fit nice an can be changed easy. If needed just adjust the scale in all directions ~100% is press-fit and 102% is loose.&nbsp;<a target="_blank" href="https://makerworld.com/models/39767" rel="nofollow noopener">Low-Poly-Version</a><h3>Colors</h3>For the Stem I recommend Bambulabs PLA Basic Green. Its almost perfect!For the flowers you can go with the classic colors like Red, Yellow, White, and Blue or use anyobe you like 😉.<h3>Print-Settings</h3>Material: PLA, PETG,… (as you wish)Layer hight: 0.2mm will do the job.  Inflill: 10-20% is enough. If you want it to be a bit heavy go for 100%Support: yes, standard but only for the stem<h3>Share your makes and support me</h3>If you like my work, give it a 🚀 boost 🚀 (the button is right below the download button). You can <a target="_blank" href="https://brickbank.app/support/" rel="nofollow noopener">support me here</a>, via <a target="_blank" href="https://ko-fi.com/brickbankapp" rel="nofollow noopener">Ko-Fi</a> or <a target="_blank" href="https://patreon.com/brickbankAPP" rel="nofollow noopener">Patreon</a>. Please leave a comment or share your makes 😁.  I appreciate your support! If your interested in selling the printed models DM me.

#3742 Plant, Flower + #3741 Stem High-Poly Version

c0ntr07

Digital Sun Dial

tata

Buzzzz

<h2>Large rugged box to store tools, spare parts, accessories, etc.</h2>&nbsp;Interior dimension247 mm x 180 mm x 120 mm (90 mm box + 30 mm lid)It's the maximum width I could fix on Bambu's 256 mm print bed&nbsp;Material used&nbsp;Box: PLALatch: PETGSeal: TPU&nbsp;Hardware needed&nbsp;Screws: (6) M4 x 45mm

Large Rugged Box

ildarcheg

Box: AMMO BOX 9mm AMMUNITION STORAGE 50 ROUNDS AMMO CRATE 9 mm&nbsp;Includes: - base (lower) - lid (upper) - insert - front plate multicolor - front plate single colorMaterials PLA, PETG, ABS, CFMulticolor Vs Single Color If you have a single-color printer like Ender 3 use MONO version (lid and front plate). If you have a multicolor printer like Bambu with AMS use the non-mono version (lid and front plate) and paint in Slicer.&nbsp;<h2>100+ CALIBERS AVAILABLE ON CULTS3D 2 DESIGNS</h2><h2><a target="_blank" href="https://cults3d.com/en/design-collections/ildarcheg/bbox" rel="nofollow noopener">BBOX</a></h2><figure class="image"><a href="https://cults3d.com/en/design-collections/ildarcheg/bbox" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/812775/2024-04-04_2cc9e9200b0068.png"></a></figure>&nbsp;<h2><a target="_blank" href="https://cults3d.com/en/design-collections/ildarcheg/abox" rel="nofollow noopener">ABOX</a></h2><figure class="image"><a href="https://cults3d.com/en/design-collections/ildarcheg/abox" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/812775/2024-04-04_49d3cd51ef544.png"></a></figure>   Following calibers are also available: 9mm 9 mm 40 S&amp;W 40s&amp;w 40sw 45 AUTO 45 ACP 45auto 45acp 6.5 Creedmoor 6.5 CM 243 WIN 243win 5.56 556 NATO 270 WIN 270win 308 WIN 308win 300 BLK 300blk Blackout 8x51R 8x51mm R Lebel 41 REM MAG 41 Mag 6mm ARC 6mm 6.8 REM SPC 6.8spc 224 Valkyrie 224 22-250 REM 22-250rem 450 Bushmaster 450 30-06 SPRG 30-06 Springfield 38 SPECIAL 38 S&amp;W Special 357 MAGNUM 357mag 10mm 10 mm 223 REM 223rem 7.62x51mm NATO 7.62x51 30 Carbine 7.62x33mm FN 5.7x28mm 5.7x28 7.62x39mm 7.62x39 22 LR 22 LR Long Rifle 350 Legend 9x43mm 17 HMR 17hmr 22 WMR 22wmr 44 REM MAG 44 Mag 45 Colt 45colt 6.5 PRC 6.5prc 6mm Creedmoor 6mm 300 WIN MAG 300 win 28 Nosler 28nosler 7MM REM MAG 7mm 6.8 Western 6.8western 380 ACP 380 auto 300 WSM 300wsm 8x57 mm Mauser 8x57mm 8x60 mm 8x60mm 7.5x55mm Swiss 7.5x55 6.5x55mm Swedish 6.5x55 357 SIG 357sig 30-30 WIN 30-30win 9x18 Makarov 9x18mm 7x57mm Mauser 7x57 32 ACP 32 auto 50 AE 50 Action Express Desert Eagle 32 S&amp;W LONG 32 WadCutter 375 H&amp;H Magnum 375 Holland &amp; Holland 9.3x62 mm Mauser 9.3x62mm 300 PRC 300prc 7mm RSAUM 7mm Rem SAUM 500 S&amp;W Magnum  500sw 7.62x54R 7.62x54R Mosin 45-70 GOVT 45-70govt 300 RUM 300RUM 260 REM 260rem 22-243 22-243 Middlestead 44-40 44-40 WCF Winchester 280 REM 280 Remington 458 SOCOM 458socom 303 BRITISH 303british 25-06 REM 25-05rem 280 ACKLEY 280 AI 338 LAPUA 338lapua 338 WIN MAG 338winmag 220 SWIFT 220swift 32 French 7.65×20mm Long 7mm-08 Remington 7mm08 9.3x74R 9.3x74mm 7x64mm 7x64 mm 300 Savage 300savage 444 Marlin 444marlin 35 Whelen 35whelen 460 S&amp;W Magnum 460SW 454 Casull 454casull 6.5 Grendel 65grendel 270 WSM 270wsm 8x68S 8x68 S 26 Nosler 26nosler 300 WBY MAG 300 Weatherby Magnum 256 WIN 256 Winchester Magnum 7mm PRC 7mm PRC 25 ACP 25ACP 222 REM 222rem 300 NORMA MAG 300 NORMA MAGNUM 6mm Dasher 6mm 410 ga 410 ga 22 Hornet 22 hornet 38-55 Win 38-55 WCF 7x33 Sako 7x33 6mm XC 6mmXC 375 Ruger 375Ruger 7mm BR Rem 7mm Benchrest Remington 22 Savage 22savage 250 Savage 250Savage 7mm WSM 7mm 30-40 Krag 30 US Army 50 Beowulf Beowulf 7.62x25 Tokarev 7.62×25mm Tokarev Custom Lids Feel free to reach me if you are interested in custom lids--------- ammo box, ammo crate, ammo storage, ammunition box, ammunition storage, ammunition crate, 3d print, stl, 3d model, 9mm, 9 mm

Ammo Box 9mm 50 rounds Ammunition Storage Ammo

pavel

Reefer

Made for four 90x90x3mm Lithophanes with 3mm frame.The base has a 29mm hole to put a lightsource through, I used an E14 LED.&nbsp;Download problem of the Profile should be fixed now.

Litophane Lamp Asia Syle

lithophane

p4mp3r072

Llavero del personaje principal de la pelicula Pesadilla antes de Navidad, jack skellington.

jack skellington keychain

keychains

creolet.marco.markl

The "NautiCup" is a versatile pencil holder designed for desks in children's rooms, home offices, or workplaces.&nbsp;Complete information about this project, including links to both free and licensed versions, is available on its dedicated page in my Wiki. If you like my work, please hit "Like" and don't forget to follow my profile.&nbsp;Wiki (English): <a target="_blank" href="https://wiki.creolet.com/en/projects/nauticup" rel="nofollow noopener">https://wiki.creolet.com/en/projects/nauticup</a> Wiki (German): <a target="_blank" href="https://wiki.creolet.com/projects/nauticup" rel="nofollow noopener">https://wiki.creolet.com/projects/nauticup</a>&nbsp;Slicer Print SettingsThe print settings are simple, but specific, and are designed for a 0.4-mm nozzle:<ul><li>Wall Generator: preferably Arachne</li><li>Walls: 3</li><li>Bottom-Layer: 3</li><li>Top-Layer: 3</li><li>Infill: 0% (Zero Percent)</li><li>Ensure Vertical Shell Thickness: On</li></ul>Collection of all NautiCup Pencil holders<a target="_blank" href="https://makerworld.com/en/u/1762145450/collections/14978" rel="nofollow noopener">https://makerworld.com/en/u/1762145450/collections/14978</a>&nbsp;

NautiCup - Rope Pencil Holder (2 Compartments)

verca

BC Designs

Edit: Apols people, the print profile was oriented incorrectly which led to a few people having bridging issues, this is now corrected in the models main profile. Would advise ignoring the other profiles. Thanks to those that let me know! &nbsp;Because I'm sure most owners who have placed an order for spares have added a few filament cutters to the basket, why not use them :)&nbsp;Cuts flush @ 90 degrees.&nbsp;F360 screenshot attached as someone had mentioned this is a remix. It is not.&nbsp;Printing<ul><li>Included 3mf file setup at 0.20 layer height @ 15% infil</li><li>3 walls</li><li>No supports, the internal bridging is fairly clean and wont show/affect performance.</li><li>Seam set to the rear of the model to keep the logo clean </li></ul>Parts<ul><li>1 x Bambu labs original filament cutter</li><li>2 x m3 x 30. 2 came with the printer, packaging screws perhaps? </li><li>2 x springs. Mine measured around 4mm x 25mm long and were quite soft. </li></ul>Assembly<ol><li>Screw both screws into from the bottom and then drop the springs on. My screws (in picture) were not fully threaded and I suspect this made assembly much easier.</li><li>Insert filament cutter into the top section and insert a strand of filament to lock in place. Cut flush</li><li>Insert top into bottom, and screw together. Press fully down and tighten screws so they sit just inside the bottom piece.</li></ol>&nbsp;

Bambu Labs filament cutter

Madness3D

Optimized for 3D printing with a amazing depth of field.&nbsp;The Glowing series is optimized with 2 filaments for the most popping effect when matched with glow in the dark filament.&nbsp;It can be printed with either glow in the dark filament or with plain bambu lab green filament (without the glow in the dark effect).&nbsp;There are 2 print profiles available.200x200 is optimized for x1c, p1s, p1p150x150 is optimized for A1 mini.&nbsp;Check out my frame options in the links below<a target="_blank" href="https://makerworld.com/en/models/49964#profileId-51734" rel="nofollow noopener">https://makerworld.com/en/models/49964#profileId-51734</a><a target="_blank" href="https://makerworld.com/en/models/40145#profileId-39785" rel="nofollow noopener">https://makerworld.com/en/models/40145#profileId-39785</a>&nbsp;Pictures can be printed with out AMS by following the print instructions below.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 5.8 PLA BambuLab Basic BambuLab Green Transmission Distance: 20Swap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to BambuLab Green for the rest. Art generated with midjourney and optimized for 3D printing with Hueforge.

"Glowing" - Pennywise - IT

hueforge

Brithawkes

printed at 0.2 layer heights with a 0.4 nozzle in vase mode

Vase with groves

vázy 

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;Santa Hat now available! <a target="_blank" href="https://makerworld.com/en/models/75526#profileId-80041" rel="nofollow noopener">Download it here!</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018267/design/2023-11-29_8d14c8695d84a.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018267/design/c6564a0c-3193-4ced-8e44-9405fcfbcfb3.jpg"></figure>A <a target="_blank" href="https://makerworld.com/en/models/18035#profileId-16764" rel="nofollow noopener">base/diorama builder</a> is now available for download for this mini figure model!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018267/design/e5f6d4cc-3842-40ac-a7e3-cb275c3670fa.png"></figure><a target="_blank" href="https://makerworld.com/en/models/18035#profileId-16764" rel="nofollow noopener">Download the different tiles here</a> for the Enderman to carry around!_____________<h3>IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS</h3>Please note that I am sharing my designs to any one to enjoy but for personal use only. I have NOT provided any commercial license to any one allowing the sale of 3d printed copies of my designs. Seeing my designs being sold for profit is discouraging for me to continue coming up with more designs. I will not hesitate to report to Etsy and other online sites if I find them being sold.__________Easy-to-assemble, quick print, kit card of Minecraft Enderman in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.Print as oriented, with NO supports needed. Model comes with breakaway supports.Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)<h4>Usage Options</h4><ol><li>Assemble as is and use as toy/collectible; or</li><li>Use the alternative part with loop and glue the halves together to make for a great keychain ornament!</li></ol>__________Thanks to the wonderful folks from <a target="_blank" href="https://sparta3d.ca/" rel="nofollow noopener">Sparta3D.ca</a> for giving me the opportunity to try their Chameleon and Galaxy PLA filaments! Great PLA filaments all around! I did my usual initial test print to make sure the filament are calibrated to meet the required clearances/tolerances of my mini figure models and got the kits printed in my first try! No bed adhesion issues, superb surface finish, no AMS jamming issues! All around great filament performance! Try their filaments today esp. if you&#39;re located in Canada!&nbsp;

Minecraft Enderman Mini Figure Kit/Keychain

hračky 

JamesThePrinter

A snowflake in a flat pack style. Print twice and slide together. Held together with a friction fit. It can stand on it's own or it can be hung by a string.&nbsp;Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>

Snowflake - Flat Pack Style

vanoce

dp makes

A pan flute, also known as panpipes or syrinx, is a musical instrument that works on the principle of the closed tube. It consists of multiple pipes that gradually increase in length (and sometimes girth) from one end to the other. Pan flutes have been popular as folk instruments for centuries, with various varieties found in cultures around the world.&nbsp;I think my idea of creating a "Whistle Pan flute" by connecting whistles of different lengths in a line is an interesting and creative one. While it may not be a completely unique idea, it certainly has the potential to produce a unique and fun sound. By carefully selecting and aligning the whistles, it may be possible to achieve a greater range of notes than a traditional pan flute. It would be exciting to see how different materials and shapes of whistles could be used to create even more variations in sound.&nbsp;This model is in progress and I will continue to tune until I have a model that gives a great Whistling Flute sound.&nbsp;•Print settings•&nbsp;Supports: No Resolution: 0.2mm Infill: 15%&nbsp;<h4>Important notice:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.paypal.com/paypalme/DPalacionis" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.

Whistle Pan flute

příště 

R C 3D

This spool adapter was originally designed to use the Sunlu 250g spools in the AMS, but ive added compatibility with nearly all 250g spools I have seen. &nbsp;This spool works so well because it adds nearly 400g of weight, has a deflector to prevent tangling in the void between the spool and filament, and adjusts to different widths. If it doesn't fit yours, let me know and I'll make it work. &nbsp;

Sample Spool Adapter for AMS - Universal

flexi.factory

This Flexi Alien is an articulated print-in-place model that needs NO supports.This is a collaboration between Anycubic and Flexi Factory. As I'm sure you noticed, he has a synthetic Cube in his chest, (like a heart). This was inspired by an excerpt I read from an interview of Anycubic cofounder James Ouyang saying “Following our heart is important." I wanted a way to incorporate that concept into a model, as this sentiment is also important in my life. This Flexi Alien is very flexible, and really fun to play with. He also easily sits and kneels. Like with all my Flexi's, I went through several iterations to make sure it was strong, and easy to print without supports. ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.To legally sell them, you may obtain my permission through this link: <a target="_blank" href="https://www.patreon.com/FlexiFactory" rel="nofollow noopener">https://www.patreon.com/FlexiFactory</a> and <a target="_blank" href="https://www.myminifactory.com/users/FlexiFactory" rel="nofollow noopener">https://www.myminifactory.com/users/FlexiFactory</a> Please help support the creative work of each 3D artist and NEVER share or sell a digital file. Super Easy Print*No Supports (adding supports will hinder functionality) *Print-in-place (no assembly) *15-20% infill to be safe *I always like to use 3 walls *PLA works great