omarterrazas521

Arough

I wanted something to route a cable along a desk edge without damaging the cable in the long run. Didn't find anything that suits my needs so I designed this contraption. Maybe someone finds it useful.=================================== Someone on Reddit asked for an alternate mounting option. Your wish is my command. Print it on its side with tree supports and brim enabled. =================================== Use two 608 bearings and any 608 bearing guide. I used the guide from this model: <a href="https://www.printables.com/model/179627-filament-guide-screw-mounted-608-bearing" rel="nofollow">https://www.printables.com/model/179627-filament-guide-screw-mounted-608-bearing</a> To secure the long roller to the top use any M3 screws.I also used this cable stop at the bottom so I don't jank the cable out of its wall plug: <a href="https://www.printables.com/model/407391-cable-stop" rel="nofollow">https://www.printables.com/model/407391-cable-stop</a> &nbsp;I printed it in the orientation shown in the pictures. Not ideal, but works.&nbsp;Here it is in action: <a href="https://youtube.com/shorts/fSgbJLltTe0" rel="nofollow">https://youtube.com/shorts/fSgbJLltTe0</a>&nbsp;The distance between the two pins is parametric and can be changed in Fusion360.

Desk edge cable roller

work

k2thestank

Now Released and more game surfaces to follow!&nbsp;The goal of slingpuck is to be the first to shoot all your pucks into your opponent's camp! A simple 2 player game.How to play&nbsp;Rules:<ul><li>1. Each player puts 5 pucks on their side.</li><li>2. The game is played with one hand.</li><li>3. Use the elastic to fire the pucks to the other side of the board.</li><li>4. Only one puck is moved at a time.</li><li>5. Slide both ends of the elastic band into the side grooves so that they snap into place.</li><li>6. As soon as the game starts, there is no pause allowed.</li><li>7. Whoever clears the board first is wins.</li></ul>Important Rules;<ul><li>When the game starts, the puck cannot be moved to clear the way of pucks</li><li>If a puck should fly out of the board, the game doesn’t pause and the player must go pick it up by himself.</li></ul>Suggested print settings:<ul><li>3 walls</li><li>10% infill</li><li>4 Top/Bottom layers (ironing is optional)</li><li>supports are optional for the puck gate if you dont trust your bridging</li></ul>Materials:<ul><li>One piece of 1.75mm to join the boards together</li><li>12 3x2mm magnets</li><li>300-350mm of 2.5-3mm elastic cord</li></ul>Changes:<ul><li>added a rounded edge /w build in layers for easier coloring/painting on the STL file as well as BL 3mf file for easier access to the attached step files inside!</li></ul>Full Ice Edition:<ul><li>Print a stick and smaller pucks and fight your way to the win the old school way! (Nets coming soon)</li><li>Uses 3x2mm magnets which will hold the nets in place and challenge your friends to classic finger hockey!</li></ul>Support:<ul><li>If you like my work and wish to help support me share and post about my designs or head over to my Cults3D or Patreon and purchase the files/subscription as well all money earned go back into my design and prototyping for new products for the community!</li></ul>Revisions:<ul><li>Dec 9 - Added more tolerance for the hinge as some were having issues getting filaments through! Also added a hole cap to plug the holes between games to prevent pucks from escaping.</li><li>Dec 27 - Added a non divider version and smaller pucks to really up the difficulty and versatility of the game</li></ul>

Sling Puck Hockey

games

Tridense

<h4>This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! <a target="_blank" href="https://www.buymeacoffee.com/Tridense" rel="nofollow noopener">https://www.buymeacoffee.com/Tridense</a> </h4> Bring the Uno cards safely into your suitcase or backpack with a new plastic case that wont dissolve after a few uses! Holds all 108 uno cards in a standard packPress on the sides of the top piece to release the lidFits both of Mattel's Uno and Dos cards <h3>Print at 0.2mm layer height</h3>All the parts are pre-oriented for printability.&nbsp;The regular parts are for up to 34mm tall cardstacks.The wider parts are for up to 38mm tall cardstacks.&nbsp;Please measure your cardstack before you print so you know which size to use.&nbsp;<h4>Changelog:</h4>2023.09.23: Added a version for taller cardstacks if you have additional cards2023.09.14: Added blank version if you have other cards like “Dos” or alike.2023.09.11: Improved locking slightly. (Case top v2)

Uno Cards Hardcase

case

junk

sale

Printalion

Simple Toilet Paper Holder (with shelf for phone)It is mounted to the wall with two screws M3. Depending on your preferences you can use diffrent mounting method.Part consists of two models. Hand closer should go in tightly, there is no need of taking it out while changing toilet paper. You can glue the hand closer for tight fit. Personally for me it stays tight fitting and no need for glue.&nbsp;Shelf has little raised corners, so that your phone wont fell down durning the ritual :D &nbsp;It is a simple model and really useful one. Part is modeled that you can print it without supports. Although if you feel your printer cant do it you can use some. I have printed the model without supports and everything turned out fine.

Toilet Paper Holder with Shelf (for phone)

home

Tacoma 

nicodeimos

Ring hole: 4.8mm.Model size: 36mm x 40mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a><a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">Want to sell my models? More info on my profile!</a>&nbsp;Likes, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Nintendo and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.

Mario Boo keychain

key chains

JamesThePrinter

Rotate the creme filling for satisfying clicks! As you rotate the filling, the spring arm will move from one position to the next, giving you a nice tactile feel. This model was designed to be the actual size of a Double Stuf Oreo (with extra creme for a better grip).&nbsp;&nbsp;AssemblyStart with one wafer piece upside-down. Glue the center gear into the center of the wafer. Stack the creme filling onto the wafer, ensuring that the tip of the spring is inside the gear. Glue the second wafer onto the remaining end of the center gear.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The filaments used in the picture above are polymaker PolyTerra Charcoal PLA and Hatchbox True White

Super Clicky Oreo Spinner

fidget 

<h3>*Edit 10/8/23 - Non-AMS Version now available!</h3>This haunted house opens up to allow the addition of an LED tea light candle. &nbsp;Check out my other holiday models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/23941" rel="nofollow noopener">here</a>.&nbsp;Print Settings & AssemblyThe roof requires a very small amount of supports.&nbsp;AMS VersionHouse Facade is a 3MF with 2 separate parts. For it to work properly, the windows need to be changed to white or transparent. Once printed, the facade needs to be glued to the case. There is geometry present to aid in alignment. After gluing is complete, just add your light inside and place the roof on top.&nbsp;Non-AMS VersionThe windows need to be printed separately. Once printed, the windows need to be glued to the back of the facade. Then the facade needs to be glued to the case. There is geometry present to aid in alignment. After gluing is complete, just add your light inside and place the roof on top. <a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;Designed with Fusion360&nbsp;The filaments used in the pictures above: <ul><li>Bambu Lab Matte Charcoal PLA</li><li>GIANTARM Transparent PLA</li></ul>

Tea Light Haunted House

Halloween 

Jal Shah

Bambu Lab recommends thoroughly cleaning carbon rods with isopropyl alcohol frequently as a maintenance step. But reaching both rods inside printer and cleaning them with fat fingers like mine can be tricky. Also, it's always a chore to keep printers maintained and most users like me simply get tired of doing it and avoid doing this until they start getting print issues.With this cleaner, now you can clean both rods at the same time by moving the extruder left and right. Attaching the tool to rods is extremely easy as the tool uses magnets to attach and align itself properly.<h3>Printing</h3>Print ONE “Connector”, ONE "Back L", ONE “Back R” and TWO “Front” pieces. Please do not use filaments that interact with Isopropyl Alcohol and instead simply use any old scrap PLA filament. You really do not need strength or beauty for such gadgets.<h3>Assembly</h3>Use picture provided as assembly guide. The tool uses four 6x3 magnets and non-abrasive kitchen sponge.<h3>Attaching to Carbon Rods and Use</h3>Soak sponge with Isopropyl Alcohol. Next, hold the back pieces around extruder on the back side and connect both front pieces with magnets. Now, simply move extruder left and right multiple times either by hand or from control panel.

Carbon Rods Cleaner for Bambu Lab Printers

BL-X1-Carbon

agepbiz

The Pocket Copter is easy and fast to print and assemble and flies great! Requires no extra hardware or glue and prints without support structures&nbsp;update10.07.23I have fixed some mesh issues on the large blade. I recommend that you redownload the blade&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/HZ3v7kSPpac"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=HZ3v7kSPpac"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/HZ3v7kSPpac" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;&nbsp;Printsettings: No raft No Support Structures 0,15mm layer heightWARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.

Pocket Copter

toys

sassiecat3d

Timme is a T-rex, and he's of a very special species called a Cutasaurus Rex, they are very rare and only lives where theres a 3d printer in site! They love to hangh out on the varm cozy printer and makes sure nobody messes with the prints!&nbsp;*****&nbsp;Important when downloading the design: This is my design and copyight to me sassiecat3d, it's not to be used commercially or resold without my permission, the stl file is under the same clause, not to be re-sold or use commercially without my permission. You are welcome to contact me if you would like to know more. :-) You agree to these terms when you download this file.&nbsp;*****&nbsp;For buying the commercial version where you can print and sell copys of a physical 3d printed version, go here: <a target="_blank" href="https://cults3d.com/en/3d-model/art/timmy-the-cutasaurus-rex-commercial-version" rel="nofollow noopener">https://cults3d.com/en/3d-model/art/timmy-the-cutasaurus-rex-commercial-version</a>

TIMMY THE CUTASAURUS REX

critters 

Michael Teeuw

<div><h1>Summary</h1><div>A clip to mount a power strip below a desk (or similar).</div></div>

Power Strip Clip

Clips

igmiller

A cup holder adapter for your car/truck that provides a large base for Thermoflask 40oz bottles and regular coffee cups. A cutout was made to allow cups with handles. Fits snug into a 2021 F150 cup holder. Printed with fuzzy skin, 15% gyroid infill and ASA.