okyipeng

Nordheim

Phone stand that also can be used with the charging cable.I use an iPhone 13 Pro with Apple leather case and that fits good.Printed on the side. No supports needed.&nbsp;If you don´t need to charge the phone in the stand you can check this model out: <a target="_blank" href="https://makerworld.com/en/models/168254#profileId-184715" rel="nofollow noopener">https://makerworld.com/en/models/168254#profileId-184715</a>

iPhone Stand

实用工具

达文西FPV

拓竹盲盒LED套件001，不需要支撑<figure class="media"><oembed url="https://www.bilibili.com/video/BV1xw411J73k/?vd_source=2089e59f0ea7f6d627e58ab3197c5395"></oembed></figure>

中式《氛围灯》Mood lighting，LED lamp 001

好看

RENREN

一体打印，无需支撑，磁铁4X2\3X2

P1P P1S部件散热风道V2024

打印机配件

Maintainer

从游戏里抠出来的模型，做了水平切割，通过三个插槽和插销进行固定，预留了0.2mm的间隙方便装配。分享的版本是平切的，还有一个根据外形凹陷异形切割的版本因为自己要用就没有共享。 -推荐用树状支撑。 -尽量按照我上传的角度进行打印，这样不容易出现问题，是我测试多次得到的较优的打印方案。 -推荐用0.2层高打印。 -插销要是尺寸不合适的话可以自己微调一下缩放再打印，建议先打一个试一试。&nbsp;The model extracted from the game was horizontally cut and fixed with three slots and pins, leaving a 0.2mm gap for easy assembly. The shared version is flat cut, and there is also a version that is cut according to the concave and irregular shape of the shape, so it was not shared because I wanted to use it myself. -Recommend using tree support. -Try to print according to the angle I uploaded as much as possible, so as not to encounter problems easily. This is the best printing solution I have tested multiple times. -Recommend printing with a height of 0.2 layers. -If the size of the plug is not suitable, you can make slight adjustments to the scale before printing. It is recommended to try printing one first.

实用工具

好看

打印机配件

Toys