Good design, easy to install. The supports are a little bit difficult to remove when printed with PLA Pro but that's just the nature of PLA Pro sticking to itself very well I think. I am also going to print the separate clamp/safety that locks the latch on the AMS holder so it can't pop open.

Great design, it prints easily, the supports are easy to remove, and the lid fits well. I printed in translucent PLA. The amount of clearance between the spool and the dessicant box is very tiny, about as much as the thickness of a single piece of paper. But clearance is clearance.

Printed in PCTG. Fits well. Nice design!

Good fit for Polymaker cardboard spools and works in the AMS 2 Pro.

I really like this design, it prints quickly and fits perfectly in the AMS2. I printed in black PETG.

Perfect design. Fits and functions like a factory part. Printed in black PETG.

Printed in PLA with no problems

Printed in PLA with no problems

I have printed several of these and they are always a hit. Really cool model.

No problems

Works well to prevent the poop bucket from moving during printing.

Printed in PETG. Easy print and good fit to lock the spools.

I printed the base in PETG and the rollers in hard TPU (TPU for AMS). I used the steel shaft recommended from Amazon. Everything assembled perfectly. One tip I have is that for the centering tool, since it is basically a one-time use item and it doesn't matter what color it is, you can save a tiny bit of filament by printing it as a purge item during a multicolor print. Nice design!

Printed in PETG. Also printed the base that helps to hold it in place. Works well!

The stock screws worked for me to attach the hanger onto the P2S. I used Bambu Studio to modify the bucket to make it about 75mm taller, this is about as tall as it can be before it touches the table with the P2S. The taller bucket holds more poop than the original. Works great! Thank you for the model.

For such a tiny model, it prints surprisingly well with a normal 0.4mm nozzle. Pictured here with a slightly larger frog.

Easy print and turned out great!

Easy print and turned out great!

Easy print and turned out great!

Easy print and turned out great!