Prints fine. Profile works. And it is a nice little creation. Thanks for that. 🙏 Sadly the profile is only for the A1. Handy app will not let you print on any other printer model. Has to go through Studio. Please update profile with the other printer models, ALL don’t work in Handy. Hex hole is a little too big, for any type of pencil that I own at least. Would love to see this fixed. Have to glue in the black details or they fall out when the ghost falls off the pencil. Printed a few. Got an improved result after turning the ghost 90 degrees, moving the seam to “back” and switching to arachnid. Just mentioning for inspiration. 🤷‍♂️ BBL P1S Combo, BBL PLA Basic, BBL Textured PEI.

Fun print. Thanks for the creative designs. 👍 I did slow down overhang speed, as someone had complained about quality at bottom of pumpkins. Otherwise no issues with profile. P1S Combo, BBL PLA Basic on BBL Textured PEI.

Print works great, and helped me figuring out ASA troubles. 5 stars even though profile needs setting up in studio, and won’t work straight out of Handy app.

Nice little print. Profile works with no problems. The fit on the can is a little too loose if you ask me, but maybe it’s just my printing. BBL PLA Basic, BBL Textured PEI, P1S.

Very nice little print. Profile works with no adjusting. Supports was annoying to remove from the mouth, but could be done. Hex hole for pencil is too large for my pencils, maybe hole could be tighter in the bottom, for variable fitting of more pencils? BBL PLA Basic on BBL Smooth PEI in P1S Combo.

Simply loving these. Comes out great every time. P1S Combo printer. Have done BBL PLA Basic and BBL PLA Matte with no changes at all. Did slow down the print for better shine when doing the blue one in BBL PLA Silk+ and the copper one in BBL PLA Metal. I use BBL Textured PEI for these, to make sure they stay on the plate. Never had a misprint. Designer is super attentive and helpful. Made the 440ml for me in a day. Gotta boost that! ❤️ In Denmark sizes are: Euro 500ml for Monster Euro 440ml for “half-liter” beer Euro 330ml for soft drinks and beer

Great design. Profile prints beautifully. Trees and brim came off easy. Works as intended. I did move the holder a little bit on the print plate. Out of the box the slicer wanted to do 3 support trees. After moving, it re-sliced with 2 trees. Did the print on a P1S Combo, BBL Smooth PEI using Sunlu PLA+2.0 ran out and finished with BBL PLA Basic. 🙄 If the designer is ever tweaking, there’s something with the angle of the hooks, as the whole holder is hanging a little bit out from the printer and the bottom hooks is floating in air (last pic). Also an idea - my build plates are allowed to touch each other. If the holder was not made with individual spaces, but open, then the holder could hold twice the plates easily, or a 5 plate holder would be way more slim. Oh! And my OCD would love 4 triangle cutouts instead of 2. 😆 Anyway, thanks for a great print. 😊👍

Prints flawless with no changes to print profile. Beautiful design. Feels sturdy. Not much more to say. Boosted! 😊 My peashooter is not fitting well, so a third mount size between the two other sizes would be a welcome addition. P1S Combo, texture PEI, BBL basic PLA.

Nice little thing. Works, comes out flawless, holds liquids with no seeping. Have printed several. Tried to remove seam by using smart scarf seam, but never got it better than original print profile, so I’m back on that one. 😊 P1S Combo, BBL smooth PEI, Sunlu PLA+ 2.0

Noticed while slicing, that something hinky was going on where the vertical sides meet the sloping top on the inner part. Turns out the thinner variable layer heights on the sloping top didn't come into effect until a bit up the slope. This looked not so great, so i manually tweaked the variable layers. Slowed down the printing for better shine, because i used a BBL Silk+ on the outer part. Looks like the fine details on the outer part is not perfect. Theres a little bit of blobs and stringing. I'm assuming this would have been perfect with standard settings and basic PLA, and as such more on my part and not the printing profiles fault. These designs are absolutely beautiful. Thanks for a great design.

Came out very nice. Print profile works beautifully. 👍 P1S, BBL Smooth PEI, BBL PLA Silk+ Slowed down the outer layers for better shine with the Silk+. Supports are sticking a little too well, that could be optimized, but most scarring is hidden. Will print again. For a V2, I would suggest a smaller stop on the shelf under the phone. It looks a bit clumsy to me, but maybe that’s just me. 🤷‍♂️

Prints awesome. Had a little adhesion issues with the second one i printed, but that's clearly me and not the profile. P1S, BBL Basic PLA, BBL PLA Support. Friendly note: PLA is way too brittle for the ratchet. It takes two revolutions of the can holder, and then the ratchet is dead. Also, first one cut a can or two. Second one i deburred and then finely sanded the sharp corners. Design could be improved by not having so sharp corners where the cans are held. But all in all it's awesome, friends wants one, will print again. ❤️🍻

Perfect print. Came out beautiful. P1S, BBL Basic PLA, Cool Plate SuperTack. Experimented with switching around colours on the design, so as to add maybe a third colour to one word or make the heart red. Couldn't figure out how to change them, but the design as is with two colours is awesome, so my skill issues was forgiven by the missus.

Perfect print profile. Came out flawless, with no setup at all. Startet the print remotely via iPhone App. Just selected design, my P1S, and a roll of BBL Basic PLA, and off it went. Tolerances and everything is absolutely spot on. One thought, not related to print profile but to the design setup. As it's being printed standing up, fidgeting is very noisy as the printed layers rub on each other. Could it be printed lying down, so the movement is with the layers instead of across? (i'm new at this, so i don't know if this is obvious to more experienced users)

Printed flawlessly in BBL Basic PLA on a P1S with everything set to default. The holder was surprisingly large, so i opted for another design, but print profile was perfect.

Works perfekt. Vertical seam is quite pronounced, can this be fixed with vase mode (I’m new)? I get a horisontal line, where the inner structure meets the roof, don’t know if that’s the printer or how to fix that. But it’s a slug trap, and it’s pretty enough for that. 😆😆

Beautiful design. Print came out looking flawless. Absolutely no stringing, fuss or other blemishes (the blobs on the black inner pot is water drops). End result i awesome. The vertical seam on the pot is barely visible, and I am new to 3D printing, but could it be removed completely by printing using Vase Mode? Or am I not understanding what that is? Also.. I read that a few users had troubles with seeping water, so I added extra bottom layer (4 in all) and extra wall (3 in all). But I still end up having seeping water on the tabletop. Using new BBL P1S Combo, and new spool with BBL Galaxy Nebula PLA. Maybe Galaxy is not great for waterproof print? Or are there other thing I could try? I’m open to suggestions, before I try again. 😜 I know waterproof is a printer issue. 5 stars for the beautiful design. ❤️

Works perfectly. Love the spring loaded lid. Came out flawlessly using Bambu Basic PLA. Have yet to get my hands on TPU and try the gasket, but even without it’s awesome, and I am already printing one for the girlfriend..

Did the slim one. Nice looking design. Does what it’s supposed to, and sits very well on the back of the printer. Came out with a tiny bit stringing, which I suppose is something in my setup. I used Bambu Basic PLA, but had to change from the PETG that was in the template. New to this, so don’t know if I should have changed some setting. Super happy with end result! Thanks..