novaerose

brody.bolanos

<h2>Description</h2>AirTag Holder&nbsp;Designed multiple options for an AirTag Holder.<blockquote><h2>Folders & Files</h2></blockquote><ol><li>Top Name Plate<ol><li>V1 Top Name Plate</li><li>V2 Top Name Plate</li></ol></li><li>Ocean Top<ol><li>V1 Top Ocean</li><li>V2 Top Ocean</li></ol></li><li>Mountains Top<ol><li>V1 Top Mountains</li><li>V2 Top Mountains</li></ol></li><li>Make My Sign Top<ol><li>V1 Make My Sign</li><li>V2 Make My Sign</li></ol></li><li>Standard Top and Bottom<ol><li>V1 Top</li><li>V1 Bottom</li><li>V2 Top</li><li>V2 Bottom</li></ol></li></ol><blockquote><h2>Print Plates</h2></blockquote><figure class="image image_resized" style="width:56.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/321769/2023-12-06_91ff095f8ac3f.jpg"><figcaption>MOUNTAINS TOP</figcaption></figure><figure class="image image_resized" style="width:56.48%;"><img src="https://makerworld.bblmw.com/makerworld/draft/321769/2023-12-06_e47e630257847.jpg"><figcaption>OCEAN TOP</figcaption></figure><figure class="image image_resized" style="width:56.1%;"><img src="https://makerworld.bblmw.com/makerworld/draft/321769/2023-12-06_a82bc7fb09b3e.jpg"><figcaption>NAME PLATE TOP</figcaption></figure><figure class="image image_resized" style="width:56.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/321769/2023-12-06_0e8daee815fa5.png"><figcaption>MAKE MY SIGN TOP</figcaption></figure><figure class="image image_resized" style="width:59.58%;"><img src="https://makerworld.bblmw.com/makerworld/draft/321769/2023-12-06_4f3b6ec04a7e1.png"><figcaption>STANDARD TOP AND BOTTOM</figcaption></figure><blockquote><h2>Print Settings</h2></blockquote><ol><li>Set your K calibration and adjust setting based on your filament<ol><li>This is important because if the surfaces are not smooth the parts will be difficult to put together.</li></ol></li><li>See Global and Object tab in the print profiles for the rest of the settings.</li></ol><blockquote><h2>Assembly</h2></blockquote>Overview<ul><li>There are two main designs, V1 and V2. The holes are oriented differently depending on how you want AirTag to hang. V1 works well for things like dog collars and V2 works well on keychains. </li></ul><figure class="image image_resized" style="width:48.85%;"><img src="https://makerworld.bblmw.com/makerworld/draft/321769/2023-12-06_428becbbbdfdd.png"><figcaption>V1 V2</figcaption></figure>Any V1 top will work with a V1 bottom. Any V2 top will work with a V2 bottom.&nbsp;Mountain, Ocean, and Name Plate Prints Notes:<ul><li>To customize, add the desired text to the top (the text needs to be imbedded as the model prints face down) and change the colors in Bambu Studio. The height of the customizable surfaces are .6mm / 3 layers.<ul><li>Make sure to keep the object settings in Bambu Studio. The customizable face plates ( Mountain, Ocean, & Name Plate) need to be printed seperatly from the Standard Top & Bottom print file due the models have Height Range Modifiers.</li></ul></li></ul>Make My Sign Notes:<ul><li>The supports for the print are a little difficult to remove. I tested different support styles and this setting provided the best results when the supports are removed. I used a small flat head bit to wedge in-between the top piece and the support then twisted the flat head to separate the support. </li><li>To create the sign, use <a target="_blank" href="https://makerworld.com/en/makerlab/makeMySign" rel="nofollow noopener">https://makerworld.com/en/makerlab/makeMySign</a> <ul><li>Change the base plate style to the circle </li><li>Make the height 1mm</li><li>Change the size of the circle to 32.12mm<ul><li>A size of 32.12 - 32.15mm circle should provide a secure fit when the plate is pressed into the top. </li><li>You can also add a small dab of CA / Superglue to secure it in place, but I haven't needed to do that. </li></ul></li></ul></li></ul>Instructions:<ol><li>Download the Standard Top and Bottom print file.</li><li>Decide which style you want to print (v1 / v2) and if you want to print all for or just the bottom model. </li><li>Print!</li><li>Next, choose and download which top you want to go with.</li><li>Make sure to print the correct top that matches the bottom ( V1=V1, V2=V2).</li><li>Print!</li><li>If you are using the Make My Sign model follow the instructions above. Once download you can add the STL to one of the bottom print files or print it seperatly.<ol><li>I printed it seperatly and ironed the top surfaces. </li></ol></li><li>To assemble just simply rotate the top and bottom together until it snaps into place.<ol><li>Facing the bottom piece, line up the top and bottom then rotate the bottom ~45 degrees counter-clockwise. The bottom should fall into place then rotate the bottom clockwise until the pieces snap into place. </li><li>Before adding the AirTag, rotate the pieces together back and forth a few times to smooth out the movement.</li></ol></li></ol>If you have any questions or problems please leave a comment and I will try to help resolve the issue.&nbsp;

AirTag Holder Customizable 

Apartment Things

Tomany

This is my solution for creating filament sampling. The size of the palette is 30x30x2mm, in the upper part I have foreseen the insertion of three lines of text indicating:<ul><li> Type of material</li><li> Color</li><li> Brands</li></ul>In the lower part I have provided a window divided into three sections with different thicknesses (0.10mm - 0.20mm - 0.30mm) which will allow you to evaluate the transparency of the material in relation to the thickness.&nbsp;In the 3mf file you will find different palettes with different descriptions that can be modified according to your needs (see attached images), obviously the printing materials must also be set based on the sample.&nbsp;Print what you need and only after having set the parameters described above.&nbsp;If you need an organizer to store your samples you can find it at the link below:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/111757" rel="nofollow noopener">https://makerworld.com/en/models/111757</a>

Filament swatches

Finished Projects

ImpacterDIY

Venetian mask, perfect for a masquerade ball :)

Venetian Mask 

Cosplay

Sevro

Desk Nyan CatPrint it, glue like on photo and it will accompany you faithfully on your desk, holding everything you need &nbsp;In print profile ther are two versions. One version fit on one plate is for AMS. Colored from bottom. You need 6 colors to print it. So 2 AMS are helpfull. Second version is colored on separated layer so you can simply use “Change filament” option&nbsp;Have Fun

Desk Nyan Cat

Home Items

Van Moses

Have some fun with these crackable Easter eggs. Pick a fun filament and start your print. The 3mf file will include a pause in the gcode for the printer, where you can add a wrapped hard candy (that will not easily melt) or a 3dp printed miniature toy during the printing process. These Easter eggs should easily and safely crack along the designed line fracture at the center/middle of the egg. Enjoy and Happy Easter!&nbsp;

Apartment Things

Finished Projects

Cosplay

Home Items

Gifts