Noetri

fractalnoise

<h2>32x32 LED Matrix Frame</h2><ul><li>No glue*, tape or screws needed</li><li>Accessible USB port</li><li>Wall- or desk-mounted</li><li>Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation</li><li>Optional socket-less version</li></ul>* I suggest gluing the four front frame pieces together, and also maybe the diffuser pieces… it's getting big :)&nbsp;<h3>Istructions</h3><h4>Print:</h4><ul><li>4xFront SPLIT</li><li>4xDiffuser SPLIT</li><li>1xBackTL</li><li>1xBackTR</li><li>1xBackBL</li><li>1xBackBR</li></ul>Print the Diffuser Screens with these settings to give the screen a horizontal “scanline” texture:<ul><li>Top/Bottom surface pattern: ALIGNED RECTILINEAR</li><li>Internal solid infill pattern: ALIGNED RECTILINEAR</li><li>Sparse infill pattern: ALIGNED RECTILINEAR</li><li>Infill direction: 0</li><li>Rotate either the model or the infill direction 90° for two of the screens.</li></ul>If using white filament for the Diffuser Screen, printing it on a textured plate will make it scatter more light and be dimmer. Use a smooth plate for best results. A textured plate will work great for clear filament though :)&nbsp;<h4>For the LED matrix, you'll need:</h4><ul><li>Four 8x32 or four 16x16 LED Matrices - e.g. <a target="_blank" href="https://aliexpress.com/item/4000544411175.html" rel="nofollow noopener">https://aliexpress.com/item/4000544411175.html</a></li><li>ESP-Wroom-32 - e.g. <a target="_blank" href="https://aliexpress.com/item/1005005972312714.html" rel="nofollow noopener">https://aliexpress.com/item/1005005972312714.html</a></li><li>MAX4466 microphone - e.g. <a target="_blank" href="https://aliexpress.com/item/3256803608057399.html" rel="nofollow noopener">https://aliexpress.com/item/3256803608057399.html</a> or MAX9814 microphone - e.g. <a target="_blank" href="https://aliexpress.com/item/3256805923391884.html" rel="nofollow noopener">https://aliexpress.com/item/3256805923391884.html</a></li><li>Power Supply 5V 15~60A (~15-20A will do for most uses) - e.g. <a target="_blank" href="https://aliexpress.com/item/1005006126703620.html" rel="nofollow noopener">https://aliexpress.com/item/1005006126703620.html</a></li></ul>&nbsp;<h4>LED Matrix/ESP32/WLED Assembly Guide:</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/669022/2024-02-09_a4b908a13092f.png"></figure>&nbsp;I connected the matrices starting with the first one (#0, the one attached to the esp32 and power supply) in the bottom right corner (when seen from the back), like this:<img src="https://makerworld.bblmw.com/makerworld/draft/669022/2024-02-09_c63a880ea9cad8.jpg">&nbsp;and then used these settings in WLED/Config/2D Configuration:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/669022/2024-02-09_3a7daa9ec5b5e.png"></figure>If you're using 8x32 matrices or want a different setup you'll have to experiment a little with the settings.&nbsp;&nbsp;<h4>WLED Microphone settings (WLED/Config/Usermods):</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/669022/2024-03-04_04fb85a0840808.png"></figure>&nbsp;Some useful resources:<ul><li>WLED Project: <a target="_blank" href="https://kno.wled.ge/" rel="nofollow noopener">https://kno.wled.ge/</a></li><li>Chris Maher WLED tutorials playlist: <a target="_blank" href="https://www.youtube.com/playlist?list=PLur8dX5PE-4pk838s_gZAdm-98-sf0f0Z" rel="nofollow noopener">https://www.youtube.com/playlist?list=PLur8dX5PE-4pk838s_gZAdm-98-sf0f0Z</a></li><li>Make It Work WLED tutorials playlist: <a target="_blank" href="https://www.youtube.com/playlist?list=PLUTKOGJvdIQ8WYfG6TDJ_c8_WlPovWbL9" rel="nofollow noopener">https://www.youtube.com/playlist?list=PLUTKOGJvdIQ8WYfG6TDJ_c8_WlPovWbL9</a></li></ul>&nbsp;<h4>My other LED projects:</h4><a target="_blank" href="https://makerworld.com/en/u/3965042544/collections/101475" rel="nofollow noopener">https://makerworld.com/en/u/3965042544/collections/101475</a>

32x32 LED Matrix Frame with Diffuser Grid

LED + Licht

3D servis

Tool for measuring hole diameters from 10mm to 25mm. Edit: added part for measuring hole diameters from 3mm to 25mm

Measure tool - hole diameter 10-25mm

Tools/Werkzeug 

JDinKC

Tired of hearing that annoying seatbelt chime just because you placed a backpack in the seat next to you? Easy just click this Chime Stopper in and away you go!&nbsp;Recommend using PETG due to temps in car but can be printed in PLA<ul><li>Turn on Arachne walls to help the small text print clearly</li><li>Print quicker with 0.2mm and 1 color if you don&#39;t care about the looks :) </li></ul>&nbsp;&nbsp;&nbsp;&nbsp;THIS IS ONLY INTENDED TO SILENCE IF OBJECTS ARE PLACED IN THE SEAT. DO NOT USE THIS IF THERE IS A PASSENGER IN THE SEAT!USE AT YOUR OWN RISK!

Seatbelt Chime Stopper

Seniorenstift 

M of WI

So my child and I like to play catch with lightweight plastic fruit. All the rest broke. So I had to print an Apple. I had already printed a Orange, Lemon, and Lime so an Apple was logically next.&nbsp;The texture on this digital scan prints so good! Prints fast.&nbsp;Apple - Amazing Texture - Fun To Throw - Don't Eat

Apple - Amazing Texture - Fun to Throw - Don't Eat

Modelle

abactor81

Star Wars “Millennium Falcon” B&amp;W Photo Print. You need only Black &amp; White Filaments.&nbsp;If you like this work, you can support me with a boost! Thanks.&nbsp;Instruction:Start with Black and change to white at layer 10.&nbsp;ATTENTION: the result may vary slightly depending on the brand and transparency of the filament used. If necessary, simply modify the filament change layer by increasing or decreasing by one or two layers.

Millennium Falcon - Star Wars B&W Photo Print

Bilder 

DKdevt

The Finger Trap toy is a miniature version of the bear trap, designed primarily for entertainment and fun.Very easy to print in ABS or PLA with a very simple assembly.

Finger Trap! 

Mechanische Teile 

CasaPrint3D

Important: Using a heat-resistant material is critical for this project, especially for the clip that attaches to the vent. Beware of risk of clip deformation after parking under the sun, it may become loose over time (even with PETG). Temperature inside a car&#39;s dashboard can easily exceed 65C (150F) on a typical summer day.&nbsp;Please note than plastic-to-plastic contact will often generate a bit of noise, but personally I don&#39;t even notice it when I&#39;m cruising. If you already printed the V1 version, the only parts that have changed in geometry and that need to be reprinted are: ‘shaft’, ‘nacelle_top’, &#39;tip&#39;, and ‘fan_with_brims’. The default vent clip included, is now printed flat for increased strength.&nbsp;This miniature jet engine easily attaches to your car&#39;s AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container.&nbsp;Among the things you can place inside here are some options:<ul><li>Freshly roasted coffee beans</li><li>A cotton with a few drops of essential oils</li><li>Aromatic plant leafs (lavender, rosemany, etc) - make sure they don&#39;t pass through the lid once it&#39;s closed</li></ul>Utilization<ol><li>Place the aromatic elements inside the recipient and screw the lid on top.</li><li>Screw the top cover</li><li>Place the fan - the side with extruded circle goes up </li><li>Insert the shaft - press until it clicks or hits the bottom. Make sure it is well aligned.</li><li>Place the tip of the fan and screw the car vent clip on the rear part. In case the tip doesn&#39;t stay atttached try scaling it down slightly.</li></ol><img class="image_resized" style="width: 71.49%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437900/design/2024-05-16_4560e8ec92314.png">Important:<ul><li>Printing with a heat-resistant material (i.e, ABS / ASA)</li><li>If the fan is too lose, which may happen depending on your tolerances try scaling it down slightly.</li><li>If the vent clip doesn&#39;t work for your car, I have included a second design as well.</li></ul>If that still doesn&#39;t work, please feel free to reach out to us in the comments.<ul><li>The fan may not spin at lower air conditioning settings, but a bit of WD40 on the shaft may help.</li><li>As a general caution: Do not place any ingredient that can be bad for breathing and do not manipulate while driving.</li><li>Remember that this file is for personal use only - For a commercial license please check our <a target="_blank" href="https://www.patreon.com/CasaPrint3D" rel="nofollow noopener">Patreon</a></li></ul>Print Settings:<ul><li>0.16mm layer height for the fan, the rest can be done at 0.2</li><li>No supports</li><li>Clean the fan from any burr or imperfections after print to improve the spin.</li></ul><a target="_blank" href="https://www.youtube.com/shorts/2Zy5KAO0LXY" rel="nofollow noopener">https://www.youtube.com/shorts/2Zy5KAO0LXY</a>&nbsp;If you&#39;d like to support our work, you can donate here: <a target="_blank" href="https://ko-fi.com/casaprint3d" rel="nofollow noopener">[Ko-Fi]</a> or give us a boost 🚀. Your contribution, no matter how small, helps us to continue bringing more 3D models to life. Thank you!&nbsp;Make sure to check out our latest design!: Anti-strees fidget pen with gears for 0.2mm nozzle.<a target="_blank" href="https://makerworld.com/en/models/458729#profileId-366866" rel="nofollow noopener">https://makerworld.com/en/models/458729#profileId-366866</a>&nbsp;<img class="image_resized" style="width: 50.49%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437900/design/2024-05-10_c31a44e8121fa.gif">&nbsp;Happy printing!

Turbofan aroma diffuser - Car vent mini Jet engine

Zeug

ProjectFilament

This planter makes a perfect gift for your loved ones :) My design was first intended to be a vase but I thought it could also make an awesome planter. - Find the vase on my profile! There is a drainage hole at the back and build-in tray. Doesn't need supports and you can resize it to your liking. &nbsp;My designs are protected by Copyright Law. When you download, you do not have the right to sell any digital file or printed model of my designs. To legally sell printed models, you may obtain my permission by signing up to my Patreon through this link:<a target="_blank" href="https://www.patreon.com/ProjectFilament" rel="nofollow noopener">patreon.com/ProjectFilament</a>&nbsp;Stay connected with me on TikTok and Instagram at @projectfilament Print away!

Valentines Planter, Hands heart Plant Pot drainage

Sabine

TripleGWorkshop

Use 3 perimeters for fastest print! Has a inner lip to keep them from sticking together.Grid is 5mm thick to be STRONG! You can trim it down to save time.Pictured here: 20mm, 10mm, 4mm - Not pictured 7mm, 15mm<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/71433/2023-10-07_5x84vdoh14pa.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/71433/2023-10-07_rw7eyw9n922o.jpg"></figure>

5 Stacking Classifier Trays 4 to 20mm Grid

Garten

user_3642158093

<h2>请注意淘宝店铺新动模型配件勿购买 无售后无售后无售后</h2><h2>请注意淘宝店铺新动模型配件勿购买 无售后无售后无售后</h2><h2>请注意淘宝店铺新动模型配件勿购买 无售后无售后无售后</h2><h2>请注意淘宝店铺新动模型配件勿购买 无售后无售后无售后</h2>&nbsp;风嘴<a target="_blank" href="https://makerworld.com/zh/models/428524#profileId-332706" rel="nofollow noopener">64涵道风扇_方形风嘴 来自 user_3642158093 - MakerWorld</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000404942/design/2024-04-01_1071d9e465d8d.jpg"></figure><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000404942/design/2024-03-31_281a192dde46c.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000404942/design/2024-03-31_4511f249b8893.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000404942/design/2024-03-31_571cb8742ecb.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000404942/design/2024-03-31_506d7e84c07b5.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000404942/design/2024-03-31_d4b765a78d41f.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000404942/design/2024-03-31_a25a364d00de6.jpg">附配件购买链接，安装螺丝为 M3滚花螺母+内六角螺丝

2kg吹力暴力风扇 64MM fan 涵道风扇 

Projekte 

alessandro.93.fra

cover for samsung s22. simple to make in just 40 minutes, printed in PLA requires supports

cover s22 honeycomb

Test

jkatz098

This knob is used on the overhead, on the Electrical Metering panel You will find recess holes, these are a guide to where the grub screws need to be, you will need to drill these out further. I have also not placed a centre hole on the bottom of the knob, due to some people needing D shaped holes and others circle. The grub screws are at a 45 degree angle to the center

533-043-18 (737 Elec Metering Knob)

Bauteile

3D Art

Ich habe endlich mein eigenen AMS Aufsatz konstruiert so wie ich es benötige und optisch Cool und praktisch finde.(inspiriert von Ben Levi)&nbsp;-Größeres Fach für Druckplatten.-Sortierte Zubehör Schublade. für nozzle,etc.-integriertes LED zum Anschrauben mit M3 Schrauben/Muffen.&nbsp;LED: <a target="_blank" href="https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>Gewindeeinsätze M3: <a target="_blank" href="https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694" rel="nofollow noopener">https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694</a>M3 Schrauben: https://www.amazon.de/St%C3%BCck-Linsenkopf-Schrauben-M3x6-Linsenkopfschrauben/dp/B07K7NRDPX/ref=sr_1_2?&nbsp;I have finally designed my own AMS attachment the way I need it and find it visually cool and practical.(inspired by Ben Levi)-Larger compartment for printing plates.-Assorted accessories drawer. for nozzle, etc.-integrated LED for screwing on with M3 screws/sleeves.&nbsp;LED: https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details&nbsp;I would like to share my work with you and hope you have fun and enjoy it.&nbsp;

AMS Riser Superstructure by 3D Art/ X1/P1

Drucker

NagyBig

Easter decor on a stick, fast and cheap, commercially viable.&nbsp;Model printed without bottom and top layers, gyroid infill 15%. It was intended with these 3 mm diameter wooden sticks(Shashlik skewers) I found in the supermarket.

Easter on a stick pack

Feiern

KG3Dee

A dispenser for your AAA batteries.Will hold up to 35 batteries.&nbsp;Model consists of two print profiles, one for 0.2mm layer height parts (Main parts) and one for 0.16mm layer height.Both profiles needs to printed.The Main parts (0.2mm) profile is divided into 3 options:<ul><li>One color print. ~4h 56m</li><li>Duo color. (Plain front cover, AAA text) ~5h</li><li>Decorated. (optional 3-4 color print) ~5h 8m<ul><li>Separate plate for the dino (2 color). ~33m</li></ul></li></ul>The 0.16mm profile has two plates, both print by object:<ul><li>Guide rail and spring lever. ~58m</li><li>Leveling knobs. ~31m</li></ul>For better quality the slide may also be printed at 0.16mm layer height.&nbsp;Disclaimer:There is a requirement for the function of the dispenser that the moving parts are friction free.There may or may not be need for minor adjustments to ensure smooth operation.This print may not be for you if you do not desire any post processing.That being said, adjustments should be minor and quite obvious. There is only one mandatory adjustment needed.As a start, inspect all printed parts and remove any zits, blobs and stringing.All my test prints are done with eSun PLA+ on a X1C.&nbsp;&nbsp;Tools needed:<ul><li>Flat head screwdriver (4mm)</li><li>Knife</li></ul>Preparations:<ol><li>A small slot in the main casing needs to be made straight, if not already. Du to the surrounding details this detail often come out a bit curved. I debated whether or not to design my way around this, but decided not to as the fix is easy.. Cut so that the walls are straight. Make sure to remove any debris from the void.</li></ol><figure class="image image_resized" style="width:40.55%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000198851/design/2024-02-22_7beee53e06555.jpg"></figure>&nbsp;<ol><li>Trial fit the actuator in the grooves on the main casing. ensure this can slide without any binds. Repeat for both sides.<ol><li>Sharp corners combined with over extrusion may introduce inaccurate corners. If this is the case, cut flush.</li></ol></li></ol><figure class="image image_resized" style="width:37.48%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000198851/design/2024-02-22_5290f8fefb1ed.jpg"></figure><ol><li>Do the same as in 2) for the actuator and the actuator cover. Ensure smooth sliding.</li><li>Repeat the check once again with the actuator and the actuator cover assembled on the casing.</li><li>On the slide there is an axle needing support. Cut away any excess filament from the underside of the axle from the side of the supported area. There is already a recess in the axle so it is only the sides that are important. Trial fit the spring lever and check that it is free to move. Leave the lever installed on the slide.</li></ol><figure class="image image_resized" style="width:35.48%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000198851/design/2024-02-22_e18a7256458d3.jpg"></figure>&nbsp;All preparations are now done.&nbsp;Assembly:<ol><li>Insert the pivot stoppers in the front and back casing and secure with the locking clips. The pivot stoppers on the back casing has a notch in them, make sure you install them on the correct place. The locking clips are also different and will only fit on one side.<ol><li>Make sure the pivots can rotate freely.</li></ol></li></ol><figure class="image image_resized" style="width:42.5%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000198851/design/2024-02-22_407f04005171e.jpg"></figure><ol><li>Assemble the leveling mechanism onto the back casing. This is the same as for the <a target="_blank" href="https://makerworld.com/en/models/158207#profileId-178745" rel="nofollow noopener">AA Mechanical Battery Dispenser</a>, and assembly instructions is described there - point 5 and onwards.</li><li>Slide in the casings onto the slide. The front has a dovetail and a groove, the back a dovetail only.</li></ol><figure class="image image_resized" style="width:33.68%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000198851/design/2024-02-22_b7a6736f02ea5.jpg"></figure><ol><li>Insert the three spacer plates. Do the top one last.</li><li>The actuator has a pin in the bottom, insert it in to the spring lever hole and pivot it into its groove on the casing. You need to push the lever a little while installing this.</li></ol><figure class="image image_resized" style="width:33.13%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000198851/design/2024-02-22_fd0cb97627ea8.jpg"></figure><ol><li>Insert the actuator cover. Push the lever down for it to enter.</li><li>Repeat for the back casing.</li><li>Install the button on the lever.</li></ol>When pushing the button the actuators should both come to rest at their starting position after you release.Adjust the guide rail to fit your brand of batteries and you should be good to go 👌The last leveling knob can be critical to get right for proper sliding down the slide.&nbsp;Leave your feedback and makes in the comments.&nbsp;

AAA Mechanical Battery Dispenser Slide

Aufbewahrung 

ICant3DPrint

<div><h1>Summary</h1><div>This collection of models is only meant to be used as a display model. I am not responsible for any damage done with or by this collection of modelsGet similar models like it for free here: <a href="https://www.printables.com/@ICant3DPrint" rel="nofollow">https://www.printables.com/@ICant3DPrint</a></div></div>

Throwing Star / Ninja Stars Collection

Spielzeug 

3D Print Masters Hub

Deluxe Tool Organizer / Build Plate Holder - NO COLOR-TWO OPTIONS to choose, with tray or with no trays, rather extra compartments-Great for keeping your printer tools and accessories organized.-Suited for A1 Mini, A1 and P1 X1-Great for storing extra build plates-Print both for side-by-side extra large capacity!-3MF has NO COLOR assignment.-Use BRIM if you are having adhesion issues with build plate.-See my 3D Printer accessories and collections for more great models!-Please like and subscribe! More to come!🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥&nbsp;

Deluxe Tool Organizer Build Plate Holder NO COLOR

Organisieren

edu.ard

Ein Lichtschalterrahmen den ich mir in Glow in the Dark gedruckt habe.Druck benötigt eine stütze.

Jaeger&Busch Lichtschalter_Rahmen

Material u.s.w 

Stag 3D

<h2>Winston the Bulldog</h2>Add some fun to your shelf with this miniature model of Winston the Bulldog, complete with shades and a tie!&nbsp;Print in different colours or print in white and give him a coat of paint. &nbsp;No supports required and low infill to keep the filament to a minimum.

Winston the Bulldog! 

Figuren 

BamBam Design

<h4>Bottle Opener for Screw & Crown Caps.</h4>The perfect all-rounder for opening bottles the easy way.<ul><li>Push and turn to open screw caps.</li><li>The screw cap opener should fit all normal sizes (Ø26 - Ø31) because of conical tooth.</li><li>Tooth Angled towards the opening side to get a better grip.</li><li>2 crown cap cpener at the handle</li><li>Bottle Cap (Crown-Cap) opener fits perfect and has much surface to lift the cap!</li><li>Big handle for elders and youngest</li></ul>&nbsp;Happy Printing 😊👍I hope you like the part and it would be great if you follow me and check out my other projects!🧐&nbsp;Disclaimer:This work by BamBam Design is licensed under Standard Digital File LicenseStrict non-commercial, personal use only license.You are not allowed to Remix or Copy this model to other 3D printing websites without my permission.&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Bottle Opener - Screw Cap & Crown Cap

Haushalt 

Da_lolinger

Ich habe ein kleines Fun Schild für meine Frau entworfen. Viel Spaß beim selber Drucken.&nbsp;Powered by Make My Sign from MakerWorld (https://makerworld.com/makerlab/MakeMySign)

Fun Schild : Gedultsfaden ist Gerissen

Schilder

Codyinbody3

Here's a personal model I made for myself that I plan on adding to my list of models I sell to customers. I think it'll be a big hit. I have a lot of customers that love all the 2A lamps I make and there's a few that are buying each one from me to collect them all. There easy to print and don't use a ton of filament. I hope you all like this model as much as I do. I think it looks best when printed on a Wham Bam Pex Plate to give it that glossy look that reflects. Enjoy!

Love With Weapons LED Lamp

Lampen

Tekk3D

Tiny Hand / Kleine Hand&nbsp;just a funny gag &nbsp;ha ha