noahgaryio

Fabrics

Masamune

This Board is to keep Track of the Initiative Order of our Players, the current active Player/Enemy and make Notes of Buff/Debuffs.It has a compartment to store all the Markers inside.We're using Whiteboard Marker to write on it.&nbsp;You'll need 33 Magnets in total. (26 for the Positions, 6 to keep it closed, 1 for the Activemarker)If you don't want to put Magnets in all the Slots please print the “Activemarker_NoMagnets” I recommend to use at least 6 Magnets to prevent it from opening when carrying it around.The Magnets are round 5mmx1mm. For glueing them in i recommend Cyanoacrylate (CA) based Super Glue&nbsp;There's a “Inimarker_Plain” attached, which you can use if you want to put your own Text on the Marker. I'm extruding the Text with 0.6mm height&nbsp;&nbsp;

DND portable Initiative Board

Vetleprint

This is a new refined version of my first tool holder / organizer.&nbsp;*More holes added on the top row.*Two extra slots added for small cutting discs.*rounded edges for a nicer appearance.*The mounting holes should fit Biltema`s pegboard.&nbsp;A nice addition to any hobby room. ;)&nbsp;&nbsp;

Dremel tool holder V2   ( new version )

Tools

鸦无量

这是问号砖块机箱的升级套件。我对机箱的散热进行了进一步改良，增加了更多散热孔和风扇位。然后还增加了顶部的提手、两个2.5英寸硬盘位和底部的橡胶脚垫。最终终于达到了一个我个人觉得比较满意的状态。<img src="https://makerworld.bblmw.com/makerworld/draft/633299/2024-02-22_1fa6919ec2d8a.png">新上传的模型文件仅包含改动的部分，剩余模型文件请在我的上一个项目里下载。这是链接：https://makerworld.com/zh/models/166193&nbsp;2024年2月26日更新：我又调整了一下机箱背面风扇和PCI位的位置，以避免产生干涉。请使用最新的“问号砖块机箱_背面_散热增强v2.stl”或者“问号砖块机箱_背面_散热增强v2.3mf”重新打印机箱背面！！！&nbsp;升级后的机箱兼容性：   机箱外尺寸218.4×208.4×198.4mm（9L，含问号）   ITX主板（170×170mm）   散热器限高48mm   双槽全高PCI位   显卡限长183mm   2.5英寸硬盘位2个   Flex电源   5cm机箱风扇位2个   12mm开机按钮（开机线）<img src="https://makerworld.bblmw.com/makerworld/draft/633299/2024-02-22_c2b51fd4a96f78.png">新增的可选配件：   硬盘支架   提手   橡胶脚垫<img src="https://makerworld.bblmw.com/makerworld/draft/633299/2024-02-22_a2f0b89581e698.png"><img src="https://makerworld.bblmw.com/makerworld/draft/633299/2024-02-22_183014ad23b808.png">升级后的所需的五金配件：   M3×10沉头内六角自攻螺丝（机箱各个面连接用）    M3×12沉头内六角自攻螺丝（机箱各个面连接用）    M3×14沉头内六角自攻螺丝（机箱各个面连接用）    M3×14沉头十字平尾自攻螺丝（机箱各个面连接用，隐藏螺丝）    M3×8大扁平头十字自攻螺丝（固定主板用）    M3×5×7圆头带垫十字螺丝（PCI位）    M3×4×5铜嵌件螺母（PCI位、提手T形螺母用）   M4×30×8扁平头十字螺丝（固定机箱风扇用）   M4.5×12圆头十字平尾自攻螺丝（固定机箱风扇用）    M4蝶形螺母（固定机箱风扇用）   M4×10圆头十字平尾自攻螺丝（固定橡胶脚垫用）   19×15×11橡胶脚垫（机箱脚垫）&nbsp;说明视频：<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1Jy42187PP/"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1Jy42187PP&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1Jy42187PP&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

Mario Question Block ITX Case Upgrade Kit|马里奥问号砖块ITX机箱升级套件

Computer Mods

Blacho

Dispenser for baby formula 60mL bottles.

Baby Formula Holder

Cairo/Jay

Jeff Smith

I mainly use 10mm 4 wire LED strips, and while there are 8mm and 12mm soldering jigs out there, I present to you my vastly over-engineered 10mm soldering jig! :) Seriously, needed one for the 10mm I use and since I couldn't find one here, I made one. Note: I use 22-gauge wire in this. While it should work with just about any 10mm LED, I use <a target="_blank" href="https://amzn.to/3oHOXkx" rel="nofollow noopener">https://amzn.to/3oHOXkx</a> Since publishing this model, I've uploaded the following for soldering two 10mm LED's together. <a target="_blank" href="https://makerworld.com/en/models/227522#profileId-245137" rel="nofollow noopener">10mm 2x LED Joining LED Soldering Jigs by Jeff Smith - MakerWorld</a> <img src="https://makerworld.bblmw.com/makerworld/draft/639182/2024-03-04_bc4452b74fabc.png">

10mm LED Strip Soldering Jig

Electronics

NoycePrints

Meet Dum-E, the handy desk helper industrial robot. I designed it with purpose in mind as it can function as a phone stand, webcam mount (logitech c920) and a business card holder. It doesn&#39;t end there though, as I aim to develop this platform with further attachments in future. These may be recommended from others and/ or what I think might be useful. I hope you find it useful and please feel free to comment any recommendations for attachments you would like to see in future. I look forward to seeing your different uses/ prints and colour schemes. Thank you for your continued support :)&nbsp;To keep files from getting complicated, I have only included the phone stand attachment in this upload. I have placed optional attachments in a sperate upload available on my profile titled “Dum-E optional attachments”. This will be periodically updated with new wrist attachments I think may be of use or other people suggest. Printing helper<figure class="table"><table><tbody><tr><td>Part</td><td>Quantity</td><td>Infill</td><td>Supports required</td></tr><tr><td>Arm 1</td><td>1</td><td>25%</td><td>YES</td></tr><tr><td>Arm 2</td><td>1</td><td>25%</td><td>NO</td></tr><tr><td>Shoulder Joint</td><td>1</td><td>30%</td><td>YES</td></tr><tr><td>Wrist to attachment connector</td><td>1</td><td>40%+</td><td>YES</td></tr><tr><td>Turntable</td><td>1</td><td>20%</td><td>NO</td></tr></tbody></table></figure><figure class="table"><table><tbody><tr><td>Part</td><td>Quantity</td><td>Infill</td><td>Supports required</td></tr><tr><td>Base</td><td>1</td><td>20%</td><td>NO</td></tr><tr><td>Feet</td><td>1</td><td>20%</td><td>NO</td></tr><tr><td>XL motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Large motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Medium motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Small motor</td><td>1</td><td>15%</td><td>NO</td></tr></tbody></table></figure><figure class="table"><table><tbody><tr><td>Part</td><td>QTY</td><td>Infill</td><td>Supports required</td></tr><tr><td>Phone stand backing</td><td>1</td><td>25%</td><td>NO</td></tr><tr><td>Phone stand bottom</td><td>1</td><td>25%</td><td>NO</td></tr></tbody></table></figure>Required for assembly Superglue for fake motor attachment and Nitrile cord.1mm nitrile rubber cord, 16cm should be enough for 1 complete arm. This is only required between joints if you intend on supporting the weight of a phone etc. Alternatively, if you have TPU filament you can use Fat Tony&#39;s handy TPU O-rings. They&#39;re a quick print and don&#39;t require superglue to fit. You can get them here: <a target="_blank" href="https://makerworld.com/en/models/205832#profileId-225948" rel="nofollow noopener">https://makerworld.com/en/models/205832#profileId-225948</a> Thanks again for the great alternative Tony!&nbsp;As an optional extra, I&#39;d recommend using 4x 3M 6mm Anti-slip sticky back rubber feet. They fit in recessed circles in the corners of the feet.&nbsp; Screws: A total of 13 are required for the arm plus 3 for the phone stand, listed below.M3x10mm - QTY 12 - available on the store, linked below.M3x15mm - QTY 3M5x30mm - QTY 1Foot: 4x M3x10mm countersunk.Base: 1x M3x15mm countersunk.Shoulder joint to Arm 2 rotation point: 1x M5x30mm countersunk.Turntable: 4x M3x10mm countersunk.Rotation point between Arm 1 and Arm 2: 1x M3x15mm countersunk.Arm 1 to wrist connector rotation point: 1x M3x15mm countersunk.Coupling attachment to wrist: 1x M3x10mm countersunk.3 M3x10mm screws are required for the Phone stand. Assembly tipsCut 3 lengths of Nitrile cord, 74, 55 and 30mm in length. Glue one side of each and cure into individual circles. These will be glued on one side between the 3 separate joints on the arm. Doing this will vastly improve the holding capacity of the arm as it will provide more friction between the joints, helping to prevent them from sagging under weight.The 74mm circle goes between the elbow joint and arm 2.The 55mm circle goes between the arm 1 and 2 joint.The 30mm circle goes between the arm 1 and wrist attachment connector.I have added 3 pictures as a guide at the end of the gallery.

Dum-E the handy desk buddy. Lamp, stand, holder 

Robots

3DJupp

I added a USB Type C Connector to the original model. The modified part can also be found on Tinkercad. It is a bit rough, but feel free to modify it.<a href="https://www.tinkercad.com/things/ayL2E4p9md1-tesla-supercharger-usb-c-holder" rel="nofollow">https://www.tinkercad.com/things/ayL2E4p9md1-tesla-supercharger-usb-c-holder</a>&nbsp;P.S.: Someone stole it from my Thingiverse account, but I am both the author of the remixed model, formerly on Thingiverse and printables. (The photo is also my property)

Tesla Super Charger for mobile phones (USB C)

MihaiDesigns

3D printed AMS stacking stand. Fits the Bambu Lab AMS (for P1P and X1 series 3D printers)<a href="https://www.youtube.com/shorts/__9SEiFJhKI" rel="nofollow">Quick presentation video</a><h3>Compatibility</h3>Fits the 3 different versions of the AMS units. However, the fit for the older version (3 large gaps on the sides instead of 4) is slightly offset and the bottom box will protrude out a bit.<h3>Materials</h3><ul><li>about 500g of filament</li><li>optional 10x404mm metal rod/pipe (such as an aluminum pipe) cost me about $2 at the hardware store</li><li>optional two M3 grub screws 6-12mm long and compatible Allen (hex) key (you can find them in sets on Amazon for $10-20), OR use long normal M3 screws, like M3x30 or M3x40 and only screw in a quarter of the length</li><li>optional felt pads for the bottom AMS unit for easier sliding</li></ul><h3>Printing</h3>There's an optional small test-fit part (plate 3) that can be printed first for checking potential fitting issues.Pick either the decorated version (plate 1) or the plain version (plate 2). Takes close to 15 hours to print with the Generic PETG profile. <h3>Assembly</h3>Cut the metal rod to 404mm long, then insert it in both printed parts. Fit the AMS unit at the top. Screw in the two grub screws at the back alongside the rod to lock it in place. If you like CAD modeling, I posted a<a href="https://youtu.be/lQgtJk67J3Q" rel="nofollow"> 90-minute video with the entire workflow for creating this model</a>.

AMS stacking stand for P1P and X1

X1-Carbon

Meister Edel

Heyho :) Some time ago I designed some simple beads for a friends pocket knife.I also use these with my outdoor knives.The design is nothing special but you have some choice and it serves its purpose :)You can print the parts very well with GITD filament or other pop colours. You can let your taste run wild :)My tip: Just try out the possibilities of your slicer! Functions like Fuzzy Skin also look great. Or make the infill a little more visible!es.<figure class="image image_resized" style="width:56.64%;"><img src="https://makerworld.bblmw.com/makerworld/user/3199084543/draft/2023-08-26_how7iokpq55b.png"></figure>Have fun and keep printin!

Paracord Bead sortiment

Bracelets

It Just Might Work

This is a remix of the square tissue box for larger rectangular tissue boxes. To maintain the correct aspect ratio for the blocks, the box is taller than a standard tissue box. There is a model for a riser included as well, which sits under the tissue box to bring it up flush to the hole. It is usable without the riser, but if a tissue does not pull the next one with it, it may be difficult to put bring the next tissue back through the hole without turning the box upside-down, so I recommend using the riser unless you really want to save the plastic. &nbsp;This was modeled to fit a Puffs brand box. The internal dimensions are 9.25" x 4.85 x 4.5h. With the riser, the internal height is reduced to 3.75". If your box does not fit these dimensions, you should be able to scale all the parts slightly to accommodate your box. The puffs box is open in the front and top as shown in the render. Boxes with a rectangular top slot will show the box cardboard through the top hole, so I have included an additional stl file for a slotted version, which will hide all of the tissue box. I did not print this version, so I do not have a print profile for it, just the stl. &nbsp;I have included the actual question mark stls and put them in the print profile for convenience. They are just glued into the cutouts sections of the box.

Question Mark Block Tissue Box (Large)

Decor

MadMax3D

Fun Christmas clocks. Faces are 195 mm diameter and printed face down for smooth or textured finish. There are 3 profiles included. One for the clock case, one for the Grinch face, and one for the wreath face. Wall hang or use the optional display stand for mantles or shelves. All printed with .4mm nozzle at .2mm layer height. Some minor support is required for the clock case and is easily removable with needle nose pliers. Use 3x8mm hex screws for the face and display stand. If you prefer to glue the face into the case, the face profiles have an option to print it with just the center hole for the clock hands.&nbsp;I used <a target="_blank" href="https://www.amazon.com/dp/B0B5T6QM3F?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">these</a> clock movements.&nbsp;<a target="_blank" href="https://makerworld.com/en/u/2612385699/collections/98648" rel="nofollow noopener">MORE CLOCKS</a>&nbsp;Printing Instructions&nbsp;I used PLA at 5% infill with a brim to minimize the potential for lifting from the plate. To assign your own colors, simply select your AMS filaments in the proper slicer slot.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/217220/2023-11-23_b4f9a33f5d1528.png"><figcaption>Select filaments from your AMS in slots 1 and 2</figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/217220/2023-11-23_062766efbc0118.png"></figure>&nbsp;&nbsp;

Christmas Clocks

Grinch

manuelbonetto.10

Simple and functional AIR TAG holder you can fix it to your bike or any other thing or object you are afraid of losing or that can be stolen. It has 2 convenient holes to be fixed, just insert your AIRTAG and screw the cap.&nbsp;

UNIVERSAL AIR TAG HOLDER

accessories

entroisdimensions_figurine

Here's the first of a great series! Bulbasaur is now available, and you have the choice between different file formats:<ul><li>STL</li><li>3mf for Multicolor Bambu Lab printer</li><li>3mf for Multicolor Prusa printer</li></ul>Video of printing the model: <a target="_blank" href="https://www.youtube.com/shorts/IG8xshdpNYw" rel="nofollow noopener">YouTube</a>, <a target="_blank" href="https://www.instagram.com/p/C2z_4D4sj75/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines/video/7330683718744476958" rel="nofollow noopener">Tiktok</a> For printing, I used PolyTerra PLA filament from Polymaker: 5 colors version:<ul><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352166969" rel="nofollow noopener">PolyTerra PLA Arctic Teal</a> (for the body)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351740985" rel="nofollow noopener">PolyTerra PLA Forest Green</a> (for the bulb and body pattern)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352003129" rel="nofollow noopener">PolyTerra PLA Sakura Pink</a> (for the tongue)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352101433" rel="nofollow noopener">PolyTerra PLA Lava Red</a> (for the eyes iris)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352232505" rel="nofollow noopener">PolyTerra PLA Cotton White</a> (for the claw, white of the eyes and pupil)</li></ul>4 colors version:<ul><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352166969" rel="nofollow noopener">PolyTerra PLA Arctic Teal</a> (for the body)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351740985" rel="nofollow noopener">PolyTerra PLA Forest Green</a> (for the bulb and body pattern)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352101433" rel="nofollow noopener">PolyTerra PLA Lava Red</a> (for the eyes iris and the tongue)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352232505" rel="nofollow noopener">PolyTerra PLA Cotton White</a> (for the claw, white of the eyes and pupil)</li></ul>To discover which new models will be released next, follow @polymaker_figurines: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> Join the Figurines Community on <a target="_blank" href="https://discord.com/invite/r2ujMfEb7S" rel="nofollow noopener">Discord</a> Happy Printing!-----------------------------------------------Printer settings on the Bambu Lab X1C<ul><li>Rafts: No</li><li>Supports: Yes</li><li>Resolution: 0.2mm</li><li>Infill: 10%</li><li>Filament brand: Polymaker</li><li>Filament color: Teal, Green, Pink, Red, White</li><li>Filament material: <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla" rel="nofollow noopener">PolyTerra PLA</a></li></ul>

Bulbasaur Multicolor

Pokemon

Valeria Momo

One, two, three… four: declare a thumb war! Challenge your friend or colleague to a duel! 👊💥<figure class="image image_resized" style="width:26.63%;"><img src="https://makerworld.bblmw.com/makerworld/draft/487904/2024-02-02_c8fa41f2e9f15.gif"></figure><h4>User Guide</h4><ol><li>Use 3 rubber bands to create the side barrier.</li><li>Get 2 thumbs (preferably from different people).</li><li>Plays! Whoever manages to beat the opponent wins.</li></ol><h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model<a target="_blank" href="https://patreon.com/ValeriaMomo?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link" rel="nofollow noopener"> by joining the Commercial License in my Patreon</a>.&nbsp;&nbsp;

Thumb Wrestling Arena

Toys

Sakul

🍌 Peeled Banana Lamp 🍌 I know you all love bananas, and now you have the chance to light up your room with this stimulating statement piece. The lamp is designed to work with a <a target="_blank" href="https://www.amazon.de/Eco-Luma-Neutrales-Halogenlampe-Gl%C3%BChlampe-Flackern/dp/B09T9947K9/ref=sr_1_5_pp?crid=HPQKR2D9638R&amp;keywords=g9%2Bled&amp;qid=1707167329&amp;sprefix=g9%2Caps%2C115&amp;sr=8-5&amp;th=1" rel="nofollow noopener">G9 LED lightbulb</a>, otherwise, you only need <a target="_blank" href="https://www.amazon.de/Gl%C3%BChbirnen-Lampenfassung-Keramik-Silikonkabel-ISOLATECH/dp/B094QQTYZL/ref=sr_1_5?crid=2IVMRCJPR1WXF&amp;keywords=g9+fassung&amp;qid=1707167361&amp;sprefix=g9+fass%2Caps%2C101&amp;sr=8-5" rel="nofollow noopener">1x G9 lamp socket</a>, 2x M3x16mm screws, <a target="_blank" href="https://www.amazon.de/EMOS-Stromkabel-Ersatzkabel-Anschlusskabel-Leuchtmittel-schwarz/dp/B014WL12Y0/ref=sr_1_5?crid=2UGYEBPRCJ60P&amp;keywords=steckdosenkabel+mit+schalter&amp;qid=1707167397&amp;sprefix=steckdosenkabel+mit+s%2Caps%2C93&amp;sr=8-5" rel="nofollow noopener">1x power cable</a> fitting for your country, and some CA glue. How to assemble: Attach the endpiece to the banana; you can use a piece of 1.75mm filament as a center point.<figure class="image image_resized" style="width: 47.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-02-05_4ceaa8f473dc5.jpg"></figure>Screw the lamp socket to the lamp plate.<figure class="image image_resized" style="width: 47.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-02-05_473e88e09d946.jpg"></figure>Pull the power cable through the banana and attach it to the lamp socket, I used some Wago clamps for it, but there are other ways that work just as well.<figure class="image image_resized" style="width: 46.85%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-02-05_7650c623ef73c.jpg"></figure>Fit everything in the banana, once it sits well, fix it in place with CA glue.<figure class="image image_resized" style="width: 47.22%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-02-05_c93b2c7abacd3.jpg"></figure>Put the lampshade on, don&#39;t glue it so you can change the lightbulb if needed.<figure class="image image_resized" style="width: 46.77%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-02-05_34b75c7f0d046.jpg"></figure>Put the shell over it, make sure it is aligned so that the banana sits nice and flush on the ground, then glue it in place.<figure class="image image_resized" style="width: 46.3%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-02-05_d66fd87002c9c.jpg"></figure> 🍌Enjoy your glowing banana!🍌  You may also like:&nbsp;<figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-06-04_fcceb05d8801.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173245/design/2024-05-01_87983a1115de6.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>

Peeled Banana Lamp

Colton

Curious Mint

Lego bricks that are perfect for printing out spares to replace missing pieces. &nbsp;Good accuracy is required to produce Lego compatible bricks, watch <a href="https://www.youtube.com/watch?v=GUz4YCnuNOQ" rel="nofollow">this YouTube video</a> if you're having trouble.&nbsp;DisclaimerLEGO®, the LEGO logo, the Minifigure, and the Brick and Knob configurations are trademarks of the LEGO Group of Companies which does not sponsor, authorize, or endorse this.

Lego Bricks

Lego

rostap

<h5>News</h5><ul><li>March 20, 2022 added bigger hook</li><li>March 21, 2022 added USB flash drive holder</li><li>March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw)</li><li>March 21, 2022 added box (screwed with M4x10 screw)</li><li>March 21, 2022 added 2 wall parts (224x190 and 293x271)</li><li>March 22, 2022 added SD card holder(screwed with M4x10 screw)</li><li>March 22, 2022 added USB flash drive holder (screw in no need)</li><li>March 22, 2022 added box (screw in no need)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</li><li>April 4, 2022 added shelves (4 dimensions)</li><li>April 6, 2022 Added drawers (found as a <a href="https://www.printables.com/en/model/163008-honeycomb-box-for-honeycomb-wall" rel="nofollow">remix</a>)</li><li>April 12, 2022 Added wrench hooks (2x)</li><li>May 6, 2023 Added more step files</li><li>July 18, 2023 Fixed some stl and step wall files. Added image-diagram how to install your honeycomb</li></ul>Don't forget to look at other <a href="https://www.printables.com/cs/model/152592-honeycomb-storage-wall/remixes" rel="nofollow">remixes</a> - there are a lot of interesting modifications and accessories<a href="https://www.reddit.com/r/honeycombwall/" rel="nofollow">https://www.reddit.com/r/honeycombwall/</a><h3>Honeycomb wall</h3>The basic part of the wall is printable on the Prusa Mini printer. It is necessary to turn off the skirt or set the distance to 1mm in order for the part to fit it on the pad. You can connect the basic parts of the wall together. You can connect it also with printable parts which can be used in various ways (you can use it for screwing to the wall, you can use it as a holder for hanger or as a holder for hook). <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tisgszo2nt8g.png"></figure>Choose the correct part size for your printer, or use <a href="https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b" rel="nofollow">https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b</a> for a custom size.<h5><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_frme5d4gs7i6.jpg"></h5><h5> </h5><h5>Diagram to show how to install your honeycomb.</h5><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_yrccc5kolg4d.png"></figure><h5> </h5><h5>Printing settings</h5><ul><li>layer height: 0.25 - 0.3</li><li>perimeters: 3 (or more - without infill for faster printing) </li></ul><h3>Parts for attaching honeycombs to the wall</h3>Some of the parts (which are orange on the picture) you can use for hanging to the wall or for connecting the basic parts together. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_be43o1ws3a92.png"></figure><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ajojx36s1wlm.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_2nxibc3el5li.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fqxf6bjpuxz4.jpg"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Fasteners and parts for attaching hooks and objects</h3>There is added one part with the nut (size M3, M4, M5) inside which can be used for screwing whatever holders you want. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_1rsdiotho5yk.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ro3vw4oameqz.png"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_oot6uv6g50m7.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hjjkudqq3rfc.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5rje9cxan9um.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Hooks and holders</h3>This is space for new holders and hooks which will be added as needed. Hook bottom and side is prepared to insert to the empty insert part. <figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_lcf73emxp801.png"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_rtv2d4cr55ea.png"></figure></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5nhoo4s4wc6p.png"></figure></td><td> </td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fcnuojpuy9qg.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ochq2a4i6fyp.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_nquxdyj69cru.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_e3jw2h6pd0mm.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_avw6edcfzzjq.jpg"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hdrj456s7o1j.jpg"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_wsokal0vy58z.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_en42os2oqu0j.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tqjhj78mu78r.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sctwl7slauf5.jpg"></figure></td><td> </td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_6bz02n1vimho.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qxwzvybnot3t.jpg"></figure>&nbsp;</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_pa8c7le03qfq.jpg"></figure></td><td> </td></tr></tbody></table></figure>&nbsp;<h3>Other parts</h3>This is cover for the connecting part which is used for hiding the screwer.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qmmoju4hk27r.jpg"></figure>And also you can use the second part (as shown in the picture) which can be used for additional attaching the honey comb to the wall. <figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hnjcfsheftbq.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sc318q6f89ef.jpg"></figure></td></tr></tbody></table></figure><h5> </h5><h5>My printing settings for all inserts </h5><ul><li>layer height: 0.2</li><li>perimeters: 4</li><li>infil: 20%</li></ul><h4> </h4>

Honeycomb storage wall

organization

PRINT_ON_DEMAND

Licence commerciale disponible sur patreon : https://www.patreon.com/PrintOnDemand Le Pyroserpent est une variation rare et mystérieux de la célèbre espèce de Pokémon dragon-feu. Contrairement à ses cousins plus communs, le Pyroserpent présente des caractéristiques serpentines distinctes qui le rendent unique. Son corps est plus allongé et sinueux, avec des écailles brillantes qui reflètent la lumière d'une manière hypnotique.&nbsp;<figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/462577/2024-01-28_b51dd90685c53.png"></figure>