nmkr1337

BalonekCZ

IMSA racing serie wall art

racing

Akio-42

<h3>Update Dezember 2023:</h3>I got a lot of requests of people who don't like to use Fusion360 so I added .stl files for bins from 1x1 to 7x7. Each size is available in 3U, 4U, 5U and 6U heights. And all files are available for 6x2mm and 6x3mm magnets.&nbsp;If you still want to have a different size bin there are instructions how to use the parametric Fusion360 file below. You just need to scroll down ;)To find the right size the files are named as follows: depth x width x height<figure class="image image_resized" style="width:57.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-12-29_f5e918155ca97.png"></figure>&nbsp;----------------------------------------------------------------------------------------------------------------&nbsp;This is a remix of the original bins by Zack Freedman that you can find here: <a target="_blank" href="https://bit.ly/ZFGridfinityDividerBins" rel="nofollow noopener">https://bit.ly/ZFGridfinityDividerBins</a>Outer dimensions of the bins are exactly the same as the original bins, so you have full compatibility to the gridfinity system.<h4>Improvements of this remix over the original model</h4><ul><li>The label tab is always as wide as the bin. This helps with lifting the bin easily and allows for more text on the label for wider bins.</li><li>The magnet holes have an improved design. They now print clean without support. I found that the magnet holes of the original bins did not print great and I had to clean a lot of them manually before being able to put in the magnets.</li><li>A completely redone parametric Fusion 360 file is included, that enables you to easily create the basis for your own bin design.</li><li>For ease of use of the Fusion 360 files dividers are not supported.</li><li>Guide to use the parametric Fusion 360 file - see the description below.</li></ul><h4>Magnets</h4><ul><li>The provided stl files come either with holes for 6x2mm magnets or 6x3mm magnets. Both versions have advantages and disadvantages.<ul><li>The 6x2mm magnets are usually a bit more expensive and hold less strong to the baseplates, however they don't interact that easily with the contents of your bins, when stacked on top of each other.</li><li>The 6x3mm magnets are usually a bit cheaper to get and when using only 2 of them on a bin you can get roughly the same holding force as with 4 6x2mm magnets. However they also interact more with the contents of your bins, when the content is magnetic or ferromagnetic.</li></ul></li></ul><h4>Accessories</h4><ul><li>The bins with the magnets go great with my version of the modular baseplates that can be equipped with ferromagnetic screws. This is cheaper than having to put magnets on the baseplate and you don't have to get the polarity of the magnets right. You can find the baseplates here: <a target="_blank" href="https://makerworld.com/en/models/25571#profileId-44132" rel="nofollow noopener">https://makerworld.com/en/models/25571#profileId-44132</a></li><li>The bins with also go great with my gridfinity tray. When using it you have a separating layer between the bins, that prevents the stronger 3x6mm magnets of interacting with magnetic content of the tray below. You can find the tray here: <a target="_blank" href="https://makerworld.com/en/models/25576#profileId-44175" rel="nofollow noopener">https://makerworld.com/en/models/25576#profileId-44175</a></li></ul><h4>Parametric source file</h4>The original parametric fusion360 file that Zack created did not work for me for bigger bins. I got errors and the final bin consisted of several objects. After hours of searching for the reason I found out that this is a bug/missing feature in fusion360. Fusion360 can only combine as many objects as were existing during the initial creation. The original file seems to be created with a 1x3 bin. That means there are problems for all bigger bins. So I re-created the fusion360 file with a bin size of 10x10. This means you will be able to create bins from 1x1 to 10x10 without errors. I decided to have the same parameters as in the original file to make it easy for users of the existing file from Zack to use this.Parameters to change without problemsThe following parameters can be changes within the given value ranges without causing problems with the provided fusion360 file.Note that you not only can add nubmers, but also fractions as parameters. This is useful for the slotsHigh parameter. In the original fusion360 file slotHigh “1” creates a 6U high bin. So if you want to easily have a bin with a specific gridfinity xU hight, you can just put in x/6 as the parameter.Changing other parameters than in the table below might work, but I did not test it.Fusion360 might need a while when you go for huge bins.<figure class="table"><table><tbody><tr><td>Parameter</td><td>Value</td><td>Description</td></tr><tr><td>slotsWide</td><td>1-10</td><td>width of the bin</td></tr><tr><td>slotsDeep</td><td>1-10</td><td>depth of the bin</td></tr><tr><td>slotsHigh</td><td>3/6 - 10/6</td><td>height of the bin</td></tr><tr><td>magnetThiccness</td><td>2.4 - 3.4</td><td>2.4 for 6x2mm magnets3.4 for 6x3mm magnets</td></tr></tbody></table></figure>Remove Magnet holesIf you do not want magnet holes on the bottom of the bin there is an easy way to remove them:Set the parameters screwTightDiameter and magnetDiameter to 0.01. This will not cause errors in the parametric file and make the holes so small your slicer will not recognize the holes any more.How to change parameters in fusion360<ul><li>Click on Modify>Change Parameters</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-09-27_oxquc1j593mo.png"></figure><ul><li>In the column Expression change the value of the parameter</li></ul><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-09-27_522fbr1n7t9p.png"></figure><h4>Warnings</h4>The file will give you a warning for bins with a size less than 10x10. This is normal and expected.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-09-27_3qkdwheewu07.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/326738/2023-09-27_hjx80ggb1hz0.png"></figure>

Gridfinity standard bins with label + parametric file

gridfinity

Archer

Description:A mini bartop arcade machine printed with a 3D printer is a compact and stylish device designed to provide an authentic retro gaming experience.&nbsp;Features:<ul><li>Compact Design The arcade machine features a bartop-style compact design, meaning it is small enough to be placed on a table or counter. Its reduced size makes it perfect for limited spaces, such as living rooms or desks. </li><li>4:3 Screen The arcade machine's screen features a 4:3 aspect ratio, providing an authentic retro gaming experience. This is ideal for classic games that were originally designed with this proportion, avoiding distortions and maintaining visual fidelity. </li><li>High-Quality Sanwa Controls The control system incorporates a joystick and buttons from the Sanwa brand, renowned for offering some of the best controls in the arcade machine market. Sanwa joysticks are known for their smoothness and precision, providing a precise and comfortable gaming experience. </li><li>Connections and Connectivit It includes 2 USB ports for easy connection to other devices and peripherals such as additional controllers. </li><li>Wide Game Compatibility The machine is compatible with a wide variety of retro games thanks to its versatile design. It can emulate systems such as NES, SNES, Sega Genesis, MAME, and more, offering users a broad selection of classic titles. </li><li>Customizable LED Lighting The arcade machine can include customizable LED lighting to add an attractive visual touch. The LEDs can be adjusted to different colors, creating a retro and modern atmosphere at the same time. </li><li>Integrated Sound System with Powerful Subwoofer The mini arcade machine features an integrated sound system that includes a powerful subwoofer. This subwoofer speaker enhances the sound quality by providing deep and powerful bass. This feature contributes to a more immersive gaming experience, bringing retro sound effects and music to life with exceptional audio quality, adding an extra element of realism to the gaming experience. </li><li>Assembly Manual Complete manual that provides detailed instructions for the assembly of the machine, covering both the assembly of the printed parts and the connection of the electronics.</li></ul>&nbsp;&nbsp;&nbsp;Links to electronic parts (Click on the images to go to the link) Updated 27-12-2023The links only work from the website, the Handy app only opens the images<ul><li>LG Display LCD 4:3 1024x768 9.7" LP097X02 KIT Select item “AudioDrive A and LCD” <a target="_blank" href="https://www.aliexpress.com/item/4000525667758.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_61893dad990928.png"></a></li></ul>&nbsp;<ul><li>Power supply 12v 2A 24W <a target="_blank" href="https://www.aliexpress.com/item/1005004233586635.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_6ad9178c79acd.png"></a></li></ul>&nbsp;<ul><li>Power supply 12v 12.5A 150W Select item "DC12V 12.5A 150W" <a target="_blank" href="https://www.aliexpress.com/item/1305959941.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_8836fcf9d1b12.png"></a></li></ul>&nbsp;<ul><li>12V to 5V step down with micro-usb output connector Select item: Micro USB <a target="_blank" href="https://www.aliexpress.com/item/1005004983394160.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_68139de302446.png"></a></li><li>Audio amplifier board <a target="_blank" href="https://www.aliexpress.com/item/1005006187401293.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_1bbf3fb3261df8.png"></a></li></ul>&nbsp;<ul><li>Zero delay Arcade USB encoder <a target="_blank" href="https://www.aliexpress.com/item/33019816294.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_927dbe52287ed8.png"></a></li></ul>&nbsp;<ul><li>Speaker Line 3.5mm Aux Audio Noise Filter Ground Loop Noise Isolator Recommended filter to eliminate noise generated by the Raspberry Pi itself, placed between the Raspberry Pi and the audio amplifier. <a target="_blank" href="https://www.aliexpress.com/item/1005001604545947.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_fed070810def08.png"></a></li></ul>&nbsp;&nbsp;<ul><li>Subwoofer 3" 25W Select item 4 Ohm 25W Speaker <a target="_blank" href="https://www.aliexpress.com/item/32570614680.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_69bcee0cb8757.png"></a></li></ul>&nbsp;<ul><li>Speakers 30x70 5W <a target="_blank" href="https://www.aliexpress.com/item/4000127737256.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_237fe53d26f22.png"></a></li></ul>&nbsp;<ul><li>Dual USB extension <a target="_blank" href="https://www.aliexpress.com/item/32869652188.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_ba81b6469a7198.png"></a></li><li>Power plug connector with switch fused <a target="_blank" href="https://www.aliexpress.com/item/32880955914.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_62b27496b6b0c8.png"></a></li></ul>&nbsp;&nbsp;&nbsp;Installation software guide:In the following video, you can see how to correctly set up your microSD card with the Batocera environment.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=NOdN5yiUKOE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/NOdN5yiUKOE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;&nbsp;Warning: There is an error in the materials list. The power supply described as "Power supply 12V 3A 36W S-36-12" is incorrect. The correct model for the power supply is "Power supply 12V 2A 24W S-24-12.

Printed mini arcade machine

big things

mcmaven

This is a 3D-printed model of a triple-axis tourbillon, which is based on the tourbillon in a Jacob and Co. Twin Turbo Furious watch. A tourbillon is a mechanism employed to counteract the effects of gravity within a watch. This intricate model includes an escape wheel, triple-axis outer frame, and a base with an integrated motor. It functions on the same fundamental principles as a traditional watch tourbillon.&nbsp;With precise assembly and calibration of the escape wheel, spring, and base drive gear, this tourbillon can smoothly rotate in three axes and maintain accurate timekeeping. The provided print settings in the Triple-axis Tourbillon Model for Kit-007.3mf file are already customized to ensure that all screw holes are clear and ready for assembly.&nbsp;Printed plastic ‘screws’ are printed to scale and used as caps to cover the steel screws that actually hold it together.<a target="_blank" href="https://youtu.be/2-7S2i6AUyM" rel="nofollow noopener">Here </a>is a real-time video of the tourbillion in action.&nbsp;Note: There are two different designs defined for the Tourbillon: the 3MF version and the STL version.&nbsp;The 3MF (Triple-axis Tourbillon Model for Kit-007.3mf file) version was designed specifically to work with Bambu printers and the Bambu slicer, and uses the Triple-axis Tourbillon Model Hardware Kit motor to drive it. It is a slightly modified version of the original STL tourbillon version. To build the 3MF version you only need to order the <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a>, which provides all the non-printed parts (screws, bearings, shafts cut to length, motor, etc.) needed to build a complete model. <a target="_blank" href="https://www.youtube.com/watch?v=HRNbihDXNwE" rel="nofollow noopener">Here </a>is a video of assembling the 3MF version with the Bambu 007 hardware kit. Note that some of the sections in the Furious Build Notes PDF file below also apply to assembling the 3MF version, with the primary difference being the construction and components of the Base and the drive mechanism.&nbsp;The STL (Raw Model Files) version is a set od files that was designed to work with any printer or slicer. It also uses a more complex Arduino controlled stepper motor mechanism to drive it. To build the STL version you can order a kit of all the non-printed parts <a target="_blank" href="https://www.makerrx.com/collections/projectkits/products/twin-turbo-furious-tourbillon-kit" rel="nofollow noopener">here</a>, otherwise you will need to order the parts listed in the Furious Build Notes PDF instructions individually. If you order the STL version of the hardware kit or buy the parts yourself, you will need to program the firmware into the Arduino before it will work. The Furious Build Notes PDF file below, describes the assembly process for the STL version. For some of the larger parts, ‘full’ (e.g., Base Outer Ring.STL) and ‘split’ versions (Base Outer Ring a.STL and Base Outer Ring b.STL) of the same part are included. The ‘full’ parts require at least a 220x220 bed for printing. The ‘split’ parts may be printed separately on a diagonal on a smaller bed, then glued together to form the larger part.&nbsp;The following filaments can be used to create a model that looks like the pictured gold, silver, copper and black version:<ul><li><a target="_blank" href="https://shrsl.com/4cim5" rel="nofollow noopener">PLA Silk Gold</a></li><li><a target="_blank" href="https://shrsl.com/4cim4" rel="nofollow noopener">PLA Silk Silver</a></li><li><a target="_blank" href="https://shrsl.com/4cim3" rel="nofollow noopener">PLA Silk Copper</a></li><li><a target="_blank" href="https://shrsl.com/4cim2" rel="nofollow noopener">PLA Basic Black</a></li></ul>Here is a video of the construction of the 007 kit. And some sections in the Furious Build Notes.PDF file may be useful for constructing the 007 kit.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=bHEU9rnnu88"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/bHEU9rnnu88" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Triple-axis Tourbillon Model Components Kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;The Hardware Kit for the Triple-axis Tourbillon Model for Kit-007.3mf file can be found here: <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a><a target="_blank" href="https://shrsl.com/4cfzj" rel="nofollow noopener">.</a>

racing

gridfinity

big things

Stuff