niltsh

Makers Mashup

Unique phone stand that allows you to select multiple positions using a gear like interface. This is 3 prints, you simply need to insert the inner print into the outer print. Print these without supports on the build plate sideways. There is a hole at the bottom for a cord or to allow sound through. Have fun! 🖨️ Printing Tips&nbsp;3 walls, no supports. 🔗 Additional Information&nbsp;This is a simple print to assemble, just insert the insert into the base, then prop up your phone and enjoy!

GearSupport Phone Stand 

life gadgets

Lp3d

Hello,  here you have my little fun Tic Tac Toe keychain.&nbsp;Don't forget to calibrate your filament.&nbsp;A smooth buildplate is recommended.&nbsp;After printing, the individual fields should release with a slight twist.&nbsp;&nbsp;Update 21.01.2024&nbsp;After receiving feedback, I tested different filament manufacturers. All filaments were calibrated using the same procedure.<ul><li>Bambu : OK</li><li>Extrudr : OK</li><li>Esun : Welded </li><li>Esun Matte: Ok </li><li>Overture : Welded</li><li>Sunlu: Welded</li><li>and so on……</li></ul>I tested a total of 8 different manufacturers and 24 colors.&nbsp;Apparently, the different manufacturers "shrink" differently. I have therefore uploaded 2 models for which I have increased the tolerances.<ul><li>+0.05</li><li>+0.1</li></ul>If anyone has a problem with the tight tolerances of the original model, please try a model with the increased tolerances. Of course, these models have also been tested by me with the materials.&nbsp;Thanks for your feedback, and happy printing

TicTacToe - KeyChain

Kids

mikolaj.mazik

I'm a student. If you like my work, please consider leaving a small donation, it will help me create more and more interesting models!<a target="_blank" href="https://ko-fi.com/mikolajmazik" rel="nofollow noopener">https://ko-fi.com/mikolajmazik</a>&nbsp;I present to you the result of 3 weeks of work, the Liebherr T284 mining dump truck, which is designed in a way that allows it to be printed entirely in 3D.This is the first prototype, prepared for gluing with plastic glue, subsequent versions will have versions with screw holes and movable front wheels. A remote-controlled version will appear in the future. Not all tolerances may be correct.Assembly instructions will appear within 2 days.Feel free to scale it up or down, if so, you may need to use toothpicks or something like that as an axis.

Liebherr T284 mining Dump Truck- Fully 3D printable V2 VERSION 

toy 

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_rk3rntee47nu.png"></figure><h4>Dimensions (LxWxH)</h4>132 x 150 x 32mm (100% scale)<h4>Basic information</h4>The design was inspired by the Green Sea Turtle, which is undoubtedly one of the most iconic sea animals. The model is is split into 6 movable parts: a shell, which serves as a centerpiece, a head, and 4 fins. It prints in place, and no additional assembly is required. The base model is slightly oversized, so that all the fine details come out nicely, namely if you're printing in multicolor. If you're printing it in a single color only, and aren't bothered with loss of definition too much, feel free to downscale it to your liking. The model has been thoroughly tested, and should print fine up to 50% of the original size in single color, if you have a well calibrated, and reasonably accurate setup.<h4>Files information</h4>I've included 5 files: All of them are in the .stl format, and sorted into 2 folders. The folders are labeled Single color and Multicolor, the single color folder contains 1 file, which is a plain, 1 piece version of the model, intended for single color printing. The Multicolor folder contains 3 files for multicolor printing, each file is named after the color, which was used on the example model in the image gallery. Import them all at once into your slicer as one file with multiple parts, and it should automatically align the parts, and assign an individual color to each of them.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_vigsf58o172r.png"></figure><h4>Material</h4>PLA<h4>Layer height</h4>0,2 mm<h4>Infill</h4>>15%<h4>Support</h4>None. The model doesn't require any support material.<h4>Scaling</h4>Possible, but mind the accuracy of your setup. If you go too far with your scaling experiments, you might run into issues such as fused segments, or fragile links. If you have a well calibrated setup, you should be able to print the model at up to 50% of the original size without any issues, other than a definition loss.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>Not necessary, the contact area with the buildplate should be sufficient. However if your print surface suffers from poor adhesion, consider using an adhesive spray, or some other kind of adhesion booster. Using a brim is possible, but not recommended, as it would be too difficult, and inconvenient to remove afterwards.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_s3a36s7dnq9a.png"></figure>This section contains a list of all updates and fixes, which were introduced to the model along the way. Each update will be thoroughly explained, so that you know, which issue was each specific update addressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_iogqewhn95rb.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_gdflo6b9cpom.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please contact me via dm, and we will talk over further details, terms and conditions, and your individual pricing plan.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_g5kaaodclbq6.png"></figure>If you like my work, and want to support it, you can buy me a coffee at <a target="_blank" href="https://www.buymeacoffee.com/jd3d" rel="nofollow noopener">https://www.buymeacoffee.com/jd3d</a> , so that I can keep my designs free for everyone.

life gadgets

Kids

toy

decoration