My5tik

Rome626

F-16 Falcon Beastmode

aerei

DutchWorkX3D

@CATIAV5FTW <a target="_blank" href="https://makerworld.com/en/u/2865638113" rel="nofollow noopener">https://makerworld.com/en/u/2865638113</a> made an amazing Jet Engine and I found some remixes on Thingiverse but reduced in size or not fitting this build. I resized the outer shell and sliced it with connectors so it is easy printable and attachable.&nbsp; Have fun printing.

Jet Engine with outer shell

engines

ceo51378

I figured it was time to move to the dark side for a bit and came up with this design - in hindsight, it looks like something Sauron would be wielding if he was a Sith Lord.This is my third modular saber, following <a target="_blank" href="https://makerworld.com/en/models/460247" rel="nofollow noopener">The Guardian</a>. I will be adding additional parts to this saber in the near future including spacers, hilts, emitter and shroud designs. And yes, I am working on a D-Loop and/or Covertec fastener.The emitter pieces and hilt grip are compatible with my other ‘modular sabers’, however, the pommel and mid sections of this saber are thinner and will not be compatible with the grips on <a target="_blank" href="https://makerworld.com/en/models/460247" rel="nofollow noopener">The Guardian</a> or <a target="_blank" href="https://makerworld.com/en/models/460258" rel="nofollow noopener">The Master</a>.Print Settings:Layer Height: 0.15mm for main parts, 0.1mm for emitter and buttons.Walls: 3 for the hilt pieces, 2 for the spacersInfill: 20% for the shroud, mid section, and pommel. 15% for the rest.NO SUPPORTS - NO BRIMS - NO GLUE!! :DFilament:<ul><li>Sunlu Silk PLA - Black</li><li>Ziro Silk PLA - Black Silver</li><li>Ziro Silk PLA - Red</li><li>Sunlu Silk PLA - Silver</li><li>Overature Matte Black PLA</li></ul>Assembly Notes:Look at the pics attached on assembly. The pommel end cap has a 4mm hex hole for an allen key. Note that there are optional indexing holes in the the pommel and button bezel - these are sized to use filament as the alignment pegs.&nbsp;As always, I hope you all enjoy printing this as much as I enjoyed designing it!

CEO's Modular Sabers - The Fallen

lightsaber

Mc2.project3D

Portachiavi casco con visiera mobile, semplice da assemblare.Video completo dell&#39;assemblaggio in fondo a questo documento.&nbsp;Stampare Casco e visiera, successivamente tagliare due pezzi di filo da 1.75mm scaldarlo in testa (vedi immagine sucessiva)<figure class="image image_resized" style="width:86.59%;"><img src="https://makerworld.bblmw.com/makerworld/draft/799185/2024-04-01_07211c68ec49a.jpg"></figure>Infilalo sul foro e scalda anche l&#39;altra estremità.(vedi immagine successiva)&nbsp;<figure class="image image_resized" style="width:86.17%;"><img src="https://makerworld.bblmw.com/makerworld/draft/799185/2024-04-01_8648e4a81b87f.jpg"></figure><figure class="image image_resized" style="width:85%;"><img src="https://makerworld.bblmw.com/makerworld/draft/799185/2024-04-01_6e4fbb20722c.gif"></figure>Video per assemblaggio:&nbsp;https://www.instagram.com/reel/C0pBnnLNqoZ/?igsh=NXo4bWxyd2ptODFp&nbsp;Buona Stampa da MC²_project_3D&nbsp;

Helmet Keyring

Generic

OrangeSs

Formula F1 2D wall art

Cars dall silhouette

games weapons

tools

Chewey

IMPORTANT: This is just a model shell grip for a VR controller.NOTE: This is for the Oculus Quest 1 controllers. If you are looking for the Quest 2 version, <a href="https://www.prusaprinters.org/prints/54967-chewey_glk-17-oculus-quest-2-vr-pistol-grip" rel="nofollow">see here</a>.Introducing the "Chewey_GLK-17_Q1"!For more details, please refer to the <a href="https://www.prusaprinters.org/prints/54967-chewey_glk-17-oculus-quest-2-vr-pistol-grip" rel="nofollow">Quest 2 version's descriptions</a>. The picture is from the Quest 2 version, however, everything is the same except for the sizing of the hollow to fit the respective controller.In addition to the reference models I noted in the Quest 2 posting, this Quest 1 model also uses the 3D scanned controller image posted by user <a href="https://www.thingiverse.com/thing:3729872" rel="nofollow">aolshove on Thingiverse</a>.Each hand controller needs:<ul><li>1x Grip</li><li>1x Slide</li><li>1x Front lower</li><li>2x Screws</li></ul>Assembly notes:<ul><li>One screw is used to join the Grip with the Front lower. These were separated for ease of printing.</li><li>One screw is used on the side to secure the Slide in place in case it slips off while mid VR session.</li></ul>NOTE: The grip STL is for the RIGHT hand. Simply mirror it to print for the LEFT hand.Derivatives and remixes are under Attribution-NonCommercial-ShareAlike, but please also include its original name "Chewey_GLK-17_Q1" somewhere on the final design. Please do not monetize on this model. Thanks!<h3>Print instructions</h3>Layer height: 0.2 Infill: 15% Support: see "Suggested_print_orientagion_Chewey_GLK-17_Quest_1_set.3mf"Refer to "Suggested_print_orientagion_Chewey_GLK-17_Quest_1_set.3mf" for print orientation and paint on support using PrusaSlicer.The grip and front lower should be the same color.

"Chewey_GLK-17_Q1" Oculus Quest 1 VR pistol grip

Oculus

Astaroth

UFO ROBOT Goldrake. Ready to print, you can enlarge it a lot and make one over 50 cm

Goldrake Grendizer Ufo Robot

figures

GianfLab

Ferrari F1-75 desk decorationDimensions: 20.5 x 5 x 3.5 cm 8.1 x 2 x 1.4 inch (length, height, depth)&nbsp;Print Settings:Use standard setting .20mm Layers + Only one wall on first layerNo Supports

Ferrari F1-75

f1 cars silhouettes

josteb

<h2>Hello guys, this is my interpretation of the pirelli pole position trohpy.</h2><h3>What you nedd for build one youself:</h3>-1 11x7.10-5 Kart tyre (i've used a Levanto Tyre because they don’t have an embossed logo, they have a spray logo but with some acetone you can remove it) -ABS (optional)-PLA<h3>Material Used:</h3>Ther Rim (part1 & part2) is printed in Verbatim Aluminium Grey and smoothed with some acetone fumes The Nut is printed with Bambulab Burgundy Red PLA-CF, i sprayed it with some clear paint (CR33) for a little bit of extra shineThe Pedestal is printed in PLA (Bambulab Basic Black, Basicfil Red, Sunlu Silk Light Gold) all this part are friction fittedThe Sticker is Printed in Red PLA&nbsp;<h3>Assembly:</h3>You need to put the (Part1) of the rim inside the Kart Tyre, after pressure fit the (Part2) of the rim, now you can screw the nut.For the sticker is a little bit tricky but nothing to worry about, you need to print the PDF file (A4 sheet) attach your 3D printed parts on the A4 paper with some biadhesive tape.Now put some super glue on the back of the letters and with the paper used as a stencil center the model to the tyre, wait a little bit for the glue to set and you are ready to go.&nbsp;<h4>I hope this description is detailed enough, </h4><h4>Have fun guys :)</h4>All 3D models are made byJosteb with Solidworks24/09/23 Italy&nbsp;

F1 Pirelli Pole Position Tyre Trophy

F1 trophy

jarvizar

3d miniature of Las Vegas, Nevada!&nbsp;Includes a colorized version highlighting the Formula 1 circuit!Also includes a small wheel for the “High Roller” ferris wheel.&nbsp;Model created in Blender using the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> addon.&nbsp;&nbsp;Check out my collection of other miniature cities: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/146964" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/146964</a>&nbsp;Collection of F1 Miniatures: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/450282" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/450282</a>&nbsp;<h3>Printing & Slicing Details</h3>&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls (can also enable “Detect Thin Walls”).&nbsp;<h3>Framing Details</h3>&nbsp;This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C8HY7YSQ" rel="nofollow noopener">https://www.amazon.com/dp/B0C8HY7YSQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/551661/2023-12-27_7536c6348b762.webp"><figcaption>Gif of the Printable Frame</figcaption></figure>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;See my <a target="_blank" href="http://patreon.com/jarvizar" rel="nofollow noopener">Patreon</a> for a commercial license, early downloads, polls towards future models, and more!&nbsp;

Las Vegas 3D Miniature (F1 Edition)

F1 circuits

Miles3D

BMW E30 Hueforge print Black until layer 7, Blue until layer 10, Gray until layer 11, White for the rest. Layer height 0.08 First layer height .16 100% infill (rectilinear)

BMW E30 Hue Forge model

Cars photos

Printednest

CAR-A-MEL | FULLY 3D PRINTABLE TOY CAR KIT&nbsp;All about this project - <a target="_blank" href="https://www.printednest.com/caramel-r1" rel="nofollow noopener">Caramel R1</a>Assembly guide - <a target="_blank" href="https://www.youtube.com/watch?v=2QrN8Uxs8ac" rel="nofollow noopener">on YouTube</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_71d09720569fd.jpg"></figure>&nbsp;What is CARAMEL&nbsp;CARAMEL is fully 3D printable (FDM) toy car consisting of 40+ parts, printed without supports. All you need is our data and your 3D printer and you can easily manufacture your own toy in the comfort of your home. In case some part get lost or broken, no worries – just re-print the missing or broken element and the toy is fully functional again.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_122084988a50a.jpg"></figure>&nbsp;CUSTOMISABLE - You can make your toy in any scale and any colour combination you can think of – you can try to print it as small as possible, while still being fully functional, or you can go the opposite direction and make it as big as your device allows you - all black, from carbon, big one or fast printed? It's a game, it's your decision. No rules, no restrictions, push your limits.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_5bf31debe539f.jpg"></figure>&nbsp;SUSTAINABLE - Toys can be damaged or broken in the heat of the play, sometimes that is the end of it – not with CARAMEL. You can only print the damaged part and make your CARAMEL fully functional again.We ship data only, nothing else, so there is no carbon footprint; the kit needs no supports to print, so there is no waste and everything fits perfectly without a single drop of glue.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_e1ef006664b03.jpg"></figure>&nbsp;EXTENSIBLE - We are developing NEW extensions and custom parts, so if you or your child are tired of your CARAMEL, you can easily upgrade it.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393386/2024-01-08_6122e7f1d458.jpg"></figure>&nbsp;OPEN DESIGN - We would like to hear your thoughts and get your feedback. Do you think CARAMEL can be improved? Do you have an idea for custom parts? You can become part of the design process – let us know your ideas and we can make them reality. You can send us your designs and we will share them with community, for FREE.

Caramel R1 Car assembly kit

cars

Formula One inspired ornamental front wing

Formula E winner Trophy