nickgrafixtattoo

robi993

I have designed a round carrying case for the GoPro Hero 9 and 10. It consists of an upper lid and a lower section. The lid has threads and will be screwed onto the lower part. The case can hold up to 4 MicroSD cards and 2 MicroSD adapters. Of course, there is also space for the GoPro camera and two batteries.&nbsp;The fit is a bit off as I don't have a GoPro to test with.&nbsp;Additionally, I will also try to create versions for newer models 11 and 12. But I need 3D Model to design it, if anyone has it, please send it to me.&nbsp;Feel free to give me suggestions for any changes to the model.&nbsp;<h4>Important:</h4>This design is for free and I created it for me and for community, in case that you like my designs and want to contribute, you can make a donation to my <a target="_blank" href="https://makerworld.com/en/models/paypal.me/robi993" rel="nofollow noopener">Paypal </a>account. I would be very grateful.

GoPro Hero 9 and 10 Box-Holder-Tasche-Halterung

gopro 10

ChipCE

<h3> SKR Universal case for Bear and Original Prusa frame</h3>I modified the Einsy case to be use with BTT SKR main board.<ul><li>Fit both SKR1.3 and 1.4. </li><li>Added some zip-tie slot for cable management and secure the input,bed,hotend cable.</li><li>Fit both bear and original mk3 frame.</li><li>Compatible with Bear parts.</li><li>Active cooling with 2 4010 blower fans.</li></ul><ul><li>clip.stl is optional, this will be use to secure the wiring. Only needed if you route the cable via the 2nd hole.<h3>Print Settings</h3></li></ul>Printer Brand:MK3Printer: <div>Prusa i3</div>Rafts:Doesn't MatterSupports: <div>No</div>Resolution:0.2mmInfill: <div>30%</div> Filament: Any PETG AnyCategory: 3D Printer Parts

SKR Universal case for Bear and Original Prusa frame

prusa mk3s parts bear

willywidget

Ender 6 BIQU H2 Mount*Update* I have a newer more compact version which can be found here (<a href="https://www.printables.com/model/183254-35mm-stock-fan-biqu-h2-mount-wbltouch" rel="nofollow">https://www.printables.com/model/183254-35mm-stock-fan-biqu-h2-mount-wbltouch</a>).I was inspired by 3DPrintBeginner (<a href="https://www.thingiverse.com/thing:4822425" rel="nofollow">https://www.thingiverse.com/thing:4822425</a>) and their direct drive conversion of the Creality Ender 6 with the BIQU H2 compact extruder and hot end. However I also wanted to include a BLtouch and an ADXL345 accelerometer for input shaping. I wasn’t happy with the other BIQU H2 fan mounts for a 5015 24v fan and the one 3DPrintBeginner used ate up too much of the Y axis for my liking.My goal was a compact, clean looking, all-in-on mount with minimal impact to build volume. Note the channel for the heater cartridge and thermistor wires requires that you mount the hot end as pictured with label facing the right (heater cartridge to the left and thermistor to the right) when looking at the front of the printer.Pros• Direct drive conversion• BLtouch mount• Accelerometer mount• Compact and clean• Good cable management• Very rigid• Makes room for the X axis end stop cableCons• -20mm in Y axis build volume• hangs too far forward IMHO• tolerances are a little too tight• unable to adjust BLtouch set screwPrint SettingsLayer: 0.2In Fill: 20%Supports: NoAdditional hardware required (see front diagram above):(yellow) 3 x M3x10 Attaching mount to X axis hot end mounting plate(blue) 4 x M3x8 Securing the BIQU H2(red) 1 x M3x16 Securing hot end fan to mount1 x M3 hex nut Securing hot end fan to mountOptional hardware:2 x M3x6 Securing the accelerometerTo complete the direct drive conversion I used the following fan mount (<a href="https://www.thingiverse.com/thing:4908537" rel="nofollow">https://www.thingiverse.com/thing:4908537</a>) along with the duct from (<a href="https://www.thingiverse.com/thing:4682915" rel="nofollow">https://www.thingiverse.com/thing:4682915</a>) and a 24v 5015 blower fan. I also created a reverse Bowden mount to finish things off (<a href="https://www.thingiverse.com/thing:4908673" rel="nofollow">https://www.thingiverse.com/thing:4908673</a>).Recommended Firmware Settings (Klipper)[stepper_y] position_endstop: 240 position_max: 240[safe_z_home] home_xy_position: 136.7, 154 # nozzle to bed center Optional settings with BLtouch[bltouch] x_offset: 8 y_offset: 29 z_offset: 0 # temp value to prevent collision[bed_mesh] speed: 100 mesh_min: 10, 50 mesh_max: 252, 252 algorithm: bicubic probe_count: 5,5 Print Settings ==============Printer Brand:PrusaPrinter: I3 MK3SRafts:NoSupports: NoResolution:0.2 mmInfill: 20Filament: Generic PETG Black&nbsp;&nbsp;&nbsp;Category: 3D Printer Extruders

Creality Ender 6 BIQU H2 Mount

ender 6 parts

Mdesign

<ul><li>Please download “Raw Model Files” where you can find temp coded 3MF file.</li><li>Upload this file as project into Bambulab Studio.</li><li>You can verify temp change after slice the model and switch “Colour scheme” to “Temperature”.<ul><li>You should see second image that I uploaded with model.</li></ul></li></ul>Enjoy ! ☺️🤌

PETG temp tower 25 min, 235 - 260°C

x1c calibratie

Meng Prints

Modular helmet mount - choose your style!&nbsp;This helmet mount comes modular - pick your addons to design your wallmount for your cosplay-helmets!&nbsp;You will need at least base and head - choose your extensions. The curved arm has an angle of 45 degrees - so you can use 2 of them to get 90 degrees angle ;)&nbsp;I added some modifiers to add extra strength to links. When printing single items I would suggest to use at least 40% gyroid/honeycomb infill.The helmet mostly weigh under 1 kg so this should be fine. But feel free to do it 100% solid.&nbsp;I added a version with more tolerance. For me it worked with the “normal” ones perfectly. The connectors link absolutely tight.&nbsp;No supports.No brims/skirts.Choose your infill wisely - either reinforce the connectors or choose like about 40%´Have fun! And feel free to add your wishes for other addons.&nbsp;EDIT: added mirrored curved extension to raw files so you now can really reach 90° the right way.&nbsp;EDIT: find some other heads here: <a target="_blank" href="https://makerworld.com/en/models/403933#profileId-305594" rel="nofollow noopener">https://makerworld.com/en/models/403933#profileId-305594</a>

Modular helmet mount - no supports!

waar je wat aan hebt

Tommy Gun

Here&#39;s a nice set of 5 coasters and amazing question mark block coaster holder/box !!&nbsp;Easy print, only have the ? and dots inserts to glue on as i wanted to save on filament !!!&nbsp;Coasters Dimensions: 104 mm diameter 4 mm height&nbsp;-Print x4 question mark inserts and x16 Dots inserts&nbsp;Interested in selling my prints : <a target="_blank" href="https://patreon.com/Papa3dHomemadePrints" rel="nofollow noopener">https://patreon.com/Papa3dHomemadePrints</a> &nbsp;Brother Box <a target="_blank" href="https://makerworld.com/en/models/112575#profileId-120555" rel="nofollow noopener">https://makerworld.com/en/models/112575#profileId-120555</a> &amp; Super mario Pipe holder : <a target="_blank" href="https://makerworld.com/en/models/101819#profileId-108453" rel="nofollow noopener">https://makerworld.com/en/models/101819#profileId-108453</a>&nbsp;Pen box&amp;pipe holder : <a target="_blank" href="https://makerworld.com/en/models/141100#profileId-153752" rel="nofollow noopener">https://makerworld.com/en/models/141100#profileId-153752</a> &nbsp;Question mark lightbox : <a target="_blank" href="https://makerworld.com/en/models/127720#profileId-138211" rel="nofollow noopener">https://makerworld.com/en/models/127720#profileId-138211</a>&nbsp;Grey Brick coaster box and coasters : <a target="_blank" href="https://makerworld.com/en/models/210143#profileId-230023" rel="nofollow noopener">https://makerworld.com/en/models/210143#profileId-230023</a>

Super Mario ? Coaster Box and Coaster set x5

mario

Just_Josh

Deadpool 3 is coming and Wolverine is back… The merc with a mouth catches some claws to the jaw. Remember the moment with this awesome model that can also hold your headset!

Deadpool and Wolverine bust or headset holder

film attributen 

Eleazar 3DinPlastic

A simple but effective shrinking tower, it is a little bit bigger than the normal ones so that the cooling of the filament is not a problem and does not give false results.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/54325#profileId-56042" rel="nofollow noopener">If you can't adjust the filament retraction but you still haven't adjusted the temperature correctly, do this test and you will solve your yarn problems.</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/683918/2024-03-11_86e5d59a448fc.webp"></figure>