nickeelen

floury

A Bambulab top glass riser compatible with 10mm LED (soft angles = no soldering)

Bambulab X1C Riser Led (10mm no soldering)

led risers

Jorge Rui

After the release of the final version of the <a target="_blank" href="https://makerworld.com/en/models/469851#profileId-385684" rel="nofollow noopener">Ergo Mouse</a>, which breaks away from the original bamboo lab model&#39;s aesthetics as well as my previous designs, I&#39;m excited to introduce a more refined model featuring generative design. Though this version is merely inspired by automatic generation techniques, it allows for precise control of wall angles, reducing the need for extensive supports. Like the base &#34;Ergo Mouse&#34; model, this version doesn&#39;t require a flat base for printing. However, I recommend using <a target="_blank" href="https://shrsl.com/4ctbi" rel="nofollow noopener">standard or galaxy PLA</a>; Matte PLA tends to have more challenging supports to remove, which can leave marks on the piece. I hope you like it :)&nbsp;Affiliated links for Bambu Lab Material if you want to help a little:<ul><li><a target="_blank" href="https://shrsl.com/4k6e8" rel="nofollow noopener">Galaxy PLA</a></li><li>PLA CF</li><li><a target="_blank" href="https://shrsl.com/4ctbi" rel="nofollow noopener">Normal PLA</a></li></ul>and part of the success on getting the mouse without that flat bottom, and almost without any support scars is the use of Gold PEI build plate, this plate, don&#39;t know why, has a stronger grip when compared to the black one, and they have it for all printers.<ul><li><a target="_blank" href="https://shrsl.com/4jqpm" rel="nofollow noopener">Gold PEI Plate</a> </li></ul>&nbsp;You can get more information on the parent project <a target="_blank" href="https://makerworld.com/en/models/469851#profileId-385684" rel="nofollow noopener">Ergo Mouse</a>,Like the parent project, this mouse uses the <a target="_blank" href="https://shrsl.com/4cpnv" rel="nofollow noopener">wireless mouse kit from bambu lab</a><figure class="image image_resized" style="width: 49.48%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-30_36c3c434cfc4d.png"></figure><h2><a target="_blank" href="https://youtu.be/9TkudRs2iG8" rel="nofollow noopener">Video do assemble the Bambu Lab Wireless Mouse kit with this “skin”</a></h2><blockquote>A Message to you:Hello! I trust everyone is in good spirits.  I&#39;m contacting you because I&#39;m encountered increasing difficulties displaying my work on Facebook and, more so, on Reddit. Although I&#39;m utilizing this platform and others, I&#39;m seeking alternative methods to show my work.  A <a target="_blank" href="https://makerworld.com/en/@Kardes.Design" rel="nofollow noopener">community member</a> (<a target="_blank" href="https://makerworld.com/en/@Kardes.Design" rel="nofollow noopener">Kardes.Design</a>) suggested an abominations called &#34;TikTok&#34;, which I admit I&#39;ve previously attempted with limited success.  Nevertheless, I&#39;m willing to try again to share my development journey and updates. For TikTok users, you can find me at: <a href="www.tiktok.com/@designrepcom" rel="nofollow">www.tiktok.com/@designrepcom</a>.  Your support in sharing would be greatly valued. <a target="_blank" href="https://www.tiktok.com/@designrepcom/video/7375077366575516961?is_from_webapp=1&amp;sender_device=pc&amp;web_id=7374868727643145761" rel="nofollow noopener">And here a tiny clip for this project</a></blockquote><h2> </h2><h2>Context</h2>This mouse has been constructed in a completely different manner from previous versions, with a particular focus on functional and ergonomic aspects. Think of it as a study rather than the final product. Nevertheless, I have decided to release it for those interested in experimenting. What to expect:<ul><li>Optimal comfort level for a hand size within the 90th percentile, which includes most adult male hands.</li><li>Perfect button actuation. Given the button layout in this kit, as well as the limitations imposed by 3D printing, this will be the most suitable key configuration and should work with most printing configurations.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_ad7df10e8eacf.png"><figcaption>A little bit of the design process - Prototype creation (2th iteration on the make)</figcaption></figure><ul><li>I have included a version with specific material for support. Especially for those with an AMS system, this is one of the materials that should always be loaded.<ul><li>It is true that it is somewhat expensive, but if used only on the interface layer, this material will allow for many prints, as only a small amount is used on the contact zone. The advantage is an almost perfect interface zone. Bambu Lab currently offers &#34;<a target="_blank" href="https://shrsl.com/4ctb1" rel="nofollow noopener">Support for PLA</a>,&#34; which is a relatively elastic material with very low adhesion to the piece&#39;s walls. <a target="_blank" href="https://shrsl.com/4jh25" rel="nofollow noopener">PVA</a>, which is water-soluble, can also be used and allows for even superior results. Both are excellent options. The downside is that the printing will take much longer to complete, and the purging effect will consume some of the precious support material.</li></ul></li></ul><blockquote>You can also try using PETG as a support material. Since the melting temperatures of the two materials are similar, they are incompatible (they don&#39;t &#34;fuse&#34; together), which is beneficial for support structures. However, PVA or the specific support material allows for superior results, and in terms of configurations, everything is automated in Bambu Studio.</blockquote>&nbsp;This uses the <a target="_blank" href="https://shrsl.com/4cpnv" rel="nofollow noopener">wireless mouse kit from bambu lab</a><figure class="image image_resized" style="width: 326.094px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-25_94087291ff26c.png"></figure>&nbsp;This was the 1st study, so I will not be making the usual render images this time. Instead, I will share the print to show how clean it comes out. Still available to print, see instruction on the bottom (Ergo Mouse I1.3mf). <figure class="table"><table style="border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_8cd86a130ffdf.png"></figure></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_de1638e12ebd6.png"></figure></td></tr></tbody></table></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_111ea882c522d.png"></figure><blockquote>And since these things don&#39;t come out of nowhere, there is a whole development process needed to make everything go smoothly. Contrary to popular belief, it’s not enough to just know how to use a 3D modeling tool and slicing software; these are just tools in an industrial design process, which is itself part of product design. And you know what? It&#39;s something everyone should try. Simply printing pieces that others have made is just one part of the experience, a small part, not bad, but only a fraction of the experience, if you like to print you should try create something.So, I invite everyone to give it a try. Start by taking the first step: create a simple model using the CAD tool of your choice, or make a clay sculpture, or a model of what you want (I often start with these). What matters is to begin. You already have one thing mastered: printing. Now, just take one more step to become a creator.Jorge Rui</blockquote>&nbsp;

Ergo Mouse - Snake edition

mouse

ukw-holzwurm

Filamentwickler Eigenentwiclung für Betrieb mit Akkuschrauber. Der Aufwickler kommt mit meinen eigenen Spulen und Original Bambu Spulen zurecht.Alle Achsen und Wellen Durchmesser 12 mm. Kugellager 6001Z 12 StückDas ist mein erster Versuch der Öffentlichmachung. ich bitte um Gnade

Filamentwickler

respooler

3Deekes

Another “Art Deco” Hueforge : Pikachu ! I&#39;m pretty sure everyone knows someone who would be happy with a Pikachu print :) Pika Pika!&nbsp;The dimensions are 180x180 mm so it fits nicely in a square frame.&nbsp;You can print frames that are compatible with my “Art Deco” Hueforges via this link :&nbsp;<a target="_blank" href="https://makerworld.com/en/models/194571" rel="nofollow noopener">https://makerworld.com/en/models/194571</a>&nbsp;Colors Used :&nbsp;Black → Red → Yellow → White&nbsp;&nbsp;I changed the thickness of the base layer, now it&#39;s 1 mm, this creates a much stronger/durable end result.I added a Height Range Modifier so that first 1mm gets printed at 0.2 layer height (instead of 0.04). This also results in a faster print result.&nbsp;I also removed the Prime Tower , it isn&#39;t really needed for Hueforges&nbsp;Swap Instructions (when all layers are 0.04) Start with Black At layer #28 (1.13 mm) swap to Red At layer #32 (1.28mm) swap to YellowAt layer #42 (1.68mm) swap to White for the rest. &nbsp;Reminder : I share these works for free for hobbyists, you can even print them as gifts for friend and family.If you like my work a Boost on Makerworld is always appreciated!&nbsp;Or if you want you could give me a tip or &#34;buy me a coffee&#34; on : <a target="_blank" href="https://ko-fi.com/3deekes" rel="nofollow noopener">https://ko-fi.com/3deekes</a>&nbsp;If you are interested in selling any of my current and future releases send me a message to info@3deekes.be

Art Deco - Pikachu

hueforge

Longracks Labs

Might seem like a bit silly, but I like to keep various Bambu supplies in the boxes they come in from but also like to be organized. Here are 3 bins for standard smaller boxes, glue stick box, and liquid blue box.

Gridfinity Bambu Supplies Boxes Bins

gridfinity

Disttrack3D

&nbsp;A heat insert press helps place them more precisely and cleanly.&nbsp;You can use the linear guide or the 2020 profile of the size you think is convenient or have at home, you just have to be careful that the profile has to be, at least, 55mm longer than the guide&nbsp;Bill of materials:&nbsp;<figure class="table" style="width:359pt;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td style="height:15.0pt;width:86pt;">Linear rail</td><td style="text-align:right;width:73pt;">1</td><td style="width:200pt;">230 length in my case</td></tr><tr><td style="height:15.0pt;">Mgn12C block</td><td style="text-align:right;">1</td><td> </td></tr><tr><td style="height:15.0pt;">M3x8 screws</td><td style="text-align:right;">13</td><td>15 if you want to put 2 springs</td></tr><tr><td style="height:15.0pt;">Washer</td><td style="text-align:right;">2</td><td>4 if you want to put 2 springs</td></tr><tr><td style="height:15.0pt;">M3 t-nut</td><td style="text-align:right;">7</td><td> </td></tr><tr><td style="height:15.0pt;">Spring</td><td style="text-align:right;">1</td><td>or 2 if you want put 2. 7,14mm diameter and 50,8mm in my case</td></tr><tr><td style="height:15.0pt;">2020 profile</td><td style="text-align:right;">1</td><td>330mm lenght in my case</td></tr><tr><td style="height:15.0pt;">Heat insert</td><td style="text-align:right;">2</td><td>4 if you want to put 2 springs</td></tr><tr><td style="height:15.0pt;">Zip tie</td><td style="text-align:right;">1</td><td> </td></tr><tr><td>M10 washer</td><td>1</td><td> </td></tr></tbody></table></figure>&nbsp;Optional for cable winder:&nbsp;<figure class="table" style="width:159pt;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="height:15.0pt;width:86pt;">M3x8 screws</td><td style="text-align:right;width:73pt;">2</td></tr><tr><td style="height:15.0pt;">M3 T-nuts</td><td style="text-align:right;">2</td></tr></tbody></table></figure>

Heat insert press

accessoires 

wall mounts 

TeddyB

Decided to try a lithophane print finally and I couldn't be more ecstatic with how it turned out so I had to share! &nbsp;Default .4 mm nozzle, should be able to just load the Bambu CMYK PLA filament and hit print as the profile has all the needed settings to create what you see in the picture.&nbsp;I used the Bambu cmyk filament bundle with the LED board, and the modified bambu frame below &nbsp;<a target="_blank" href="https://makerworld.com/en/models/38209#profileId-36952" rel="nofollow noopener">https://makerworld.com/en/models/38209#profileId-36952</a> Shoutout to SlowEvo for providing the calibrated filament flush volumes &nbsp;<a target="_blank" href="https://makerworld.com/en/models/27131#profileId-23574" rel="nofollow noopener">https://makerworld.com/en/models/27131#profileId-23574</a>&nbsp;This cannot be sold commercially as this is a licensed character which I do not own rights to

Shiny Scizor Lithophane - cmyk pokemon 

lithopane

Dr.  J. Ma

If you like this model, please consider boosting it — your support inspires more creations!<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-17_b316adea6f575.png">----------------------------<h2>Intro</h2>The Breeze Model X is the latest addition to the &#34;Breeze&#34; series of RC planes.&nbsp;<ul><li>Customizable upgrades</li><li>Lightweight yet strong</li><li>Modular design</li><li>SUB250 compliant</li><li>Few parts to assemble</li><li>Completely FREE to download</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-12_2073f045ac682.png"></figure>License:Breeze Model X is available for free download and non-commercial use only when downloaded exclusively from MakerWorld.com. Please contact me for authorization if you wish to use it beyond the Standard Digital File License.&nbsp;As I will continuously enhance this model base on your feedback, please revisit here for updates.&nbsp;The Breeze Model X is a SUB250 modular flying wing, designed to weigh less than 250g, allowing for easy compliance with aviation regulations in many countries. This design means you can enjoy flying in most regions without the need for a remote identification tag. However, it&#39;s important to verify your local laws and ensure you fly in safe, unpopulated areas since it can go very fast.&nbsp;It flys notable responsiveness, offering a firm yet reactive feel, which suits aerobatic maneuvers. It can rolls and loops easily.Additionally, it features an efficient wingfoil, achieving a tested glide ratio close to 12 (which means it descends 1 meter for every 12 meters it glides).&nbsp;<h3>Flying characteristics:</h3><blockquote>In my fly test.</blockquote>Wing Span: 560mm (incl. winglets)RTF weight: ~250gBattery: 3S 1300mAhMotor: 1406 3300kvProp: Gemfan 3inch 3052 (high pitch blades for speed)Glide Ratio: ~12:1 @ 12m/sStall speed: 7.5m/s or 27km/hCruise Speed: 15m/s or 54km/hTop speed: 30m/s or 108km/hCruise throttle: 50%Cruise Time: 45minThurst to weight ratio: 0.9&nbsp;Print Time: ~10 Hours vase mode PLA-Aero or LW-PLA&nbsp;--Note : Per user feedbacks, if you want to print with non-foaming materials such as PETG, you will need a 3S 18650 pack to get the COG right (normal lipo is too thick for the fuselage and the canopy wont fit). Prepare for heavier wing-load (stall speed will be increased massively)&nbsp;This extended nose parts allows you to fit smaller battery <figure class="image image-style-side image_resized" style="width: 36.66%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-05-24_891c9f2470cf2.png"></figure>while still making COG right. Thanks to the author<a target="_blank" href="https://makerworld.com/en/models/465958#profileId-374847" rel="nofollow noopener">https://makerworld.com/en/models/465958#profileId-374847</a><h4> </h4><h4> </h4><h4> </h4><h4> </h4><h4>BOM besides printable parts and Fly Controller</h4><ul><li>5 x 300mm Carbon Tube x 1</li><li>EMAX 9g servo x 2</li><li>Push rod 1mm to 1.2mm diameter, at least 11cm length x 2</li><li>M3 5mm Nylon screw x 3 (Optional)</li><li>M3 thread insert x 3 (Optional)</li></ul>&nbsp;Recommended Filaments<a target="_blank" href="https://us.store.bambulab.com/products/asa-aero" rel="nofollow noopener">Bambu Lab ASA-Aero</a>: https://us.store.bambulab.com/products/asa-aero<a target="_blank" href="https://us.store.bambulab.com/products/pla-aero" rel="nofollow noopener">Bambu Lab PLA-Aero</a>: https://us.store.bambulab.com/products/pla-aero&nbsp;<h4>Tuning before mainden</h4><ul><li>Mixer setting:</li></ul>Pitch 60% Roll 30% – this is critical, because this plane has large control surface, and roll is too sensitive.&nbsp;<ul><li>INAV PID setting (under testing):</li></ul>I am still finding a good PID, will update you here. Mean while, please reduce roll PIDFF rate which the default values are really unstable.Old setting 2024/04/13:<ul><li>pitch rate: 150 deg/sec</li><li>roll rate: 310 deg/sec</li><li>Lower all Roll PID by half. Set roll FF to 60.</li><li>Lower all Pitch PID by 25%. Set pitch FF to 80.</li><li>(Important) Enable advance PID and lower “level strength” to 8.</li></ul>Current suggestion 2024/05/03:<blockquote># Mixer: servo mixer smix resetsmix 0 1 0 -30 0 -1 smix 1 1 1 -60 0 -1 smix 2 2 0 -30 0 -1 smix 3 2 1 60 0 -1# PID and rate setting set fw_p_pitch = 10 set fw_i_pitch = 10 set fw_d_pitch = 5 set fw_ff_pitch = 70 set fw_p_roll = 8 set fw_i_roll = 5 set fw_d_roll = 5 set fw_ff_roll = 51 set fw_p_level = 10 set roll_rate = 30 set pitch_rate = 17# save configuration save  </blockquote>&nbsp;&nbsp;&nbsp;Please give suggestion if you have better turning.Once it is stable, I will export the setting cmd, and you could apply it in one go.&nbsp;&nbsp;&nbsp;/*-----------------------------------------*/ <h2>Design Principle</h2><figure class="media"></figure>&nbsp;Alternative source (Chinese via bilibili):<figure class="media"><oembed url="https://www.bilibili.com/video/BV1fT421171k/"></oembed></figure>&nbsp;&nbsp;3D printed RC planes often seem stiff and easy to break, getting damaged from small crashes that foam planes usually handle well. To fix this in my design, I focused on two main ideas:<ul><li>Lightweight and Strong – be SUB250 and resistance to small crash.</li><li>Modular design – easy to swap broken modules and customized options.</li></ul>Also, foaming filaments (like PLA-Aero, ASA-Aero, LW-PLA, etc.) usually have issues with strings in normal printing. But, a special printing way called spiral vase mode can solve this by drawing the shape&#39;s outline all at once without stopping. This needs a special design trick to make sure every layer can be drawn in one go, with each layer sitting right on top of the last one. This lets Bambu Studio make a continuous printing line, avoiding any stops and moves.&nbsp;The design was tricky, but don’t worry about it. I did the hard work, and you can just print with the profiles I shared.&nbsp;NOTE: DO NOT rearrange the foaming parts, they need to be print one each plate with set spiral-vase mode.&nbsp;This flying wing has only 6 parts (3 big and 3 small), which have to be printed one by one in vase mode with foaming filaments. The other parts can be printed all together on one plate with regular filament.&nbsp;There are way fewer foaming parts than other RC planes you might see for sale. And printing this whole plane takes only about 10 hours, which is a lot less time than others that take 50+ hours.&nbsp;<h3>Lightweight and strong</h3> You might see some red parts in the pictures. Most of these aren&#39;t made from foaming material; they&#39;re actually for making the plane stronger. While the foaming parts cover a lot of the area and add to the weight, these regular material parts make it much tougher in important spots like where the motor is, the front edge of the wing, the nose, the bottom, and parts that let you swap things easily.&nbsp;These red parts help the wing handle normal landings and minor crashes without getting damaged.&nbsp;The weight ratio between foaming material and regular material is about 4:1.&nbsp;<h3>Modular and easy to assembly</h3>Even with its lightweight and strong design, the plane can still crash badly. When a crash happens, a typical 3D-printed plane has little chance to survive. But with this design, wings or broken parts can be easily swapped out thanks to the quick-swap connectors, a feature from the start.&nbsp;One of my goals was to make repairs possible right at the flying site. The solution? Make everything changeable.&nbsp;Yes, even wings of this small size have a quick-release system that allows for disassembly in no time, all without a single screw.I always have a set of wings and a body ready to replace any broken parts. During my flight controller tuning and plane optimization, I used up one plane on average each time. However, this wing design does a great job protecting the electronics; I&#39;ve never lost a servo or any electronic part.&nbsp;The assembly of each module is as simple and straightforward as possible. I really enjoy the building process, and I think you will too.Assembling a complete plane takes less than 30 minutes once you&#39;re familiar with it. And you shouldn&#39;t need to tune your new plane much, because 3D-printed RC planes always have accurate dimensions.<h3> </h3>&nbsp;/*-----------------------------------------*/ <h2>Assembly Guide</h2><figure class="media"><oembed url="https://www.bilibili.com/video/BV1km421j7s9/?share_source=copy_web&amp;vd_source=b546a6d9597e02729926794ebfed558e"></oembed></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_865c54c42a484.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-12_aeb7a2fda6674.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_b94d1ac3b9158.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_9f6387ab99d19.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_63c04a8bdd89a.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-12_5f2a8ad203ab9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_3fc3233debeac.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_91b7cad904b61.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-11_165d3cce09956.png"></figure>&nbsp;&nbsp;<h3>Video Assembly Guide</h3>video: To be uploaded&nbsp;&nbsp;/*-----------------------------------------*/<h2>Customized your planes</h2>I&#39;ve designed many options to enhance the capabilities of these small wings. Some are aimed at improving flying characteristics, while others boost functionality, like FPV (First-Person View) capabilities. Please see below for the different options available.&nbsp;<h4>Winglet options</h4>The Lite version, as the default option, is small and lighter, designed to meet the SUB250g regulations. This makes it perfect for those who want a compact and efficient flyer. On the other hand, the Large version offers more lift and better yaw stability, making it suitable for those who prefer a plane that can handle more varied flying conditions. More info please checkout this amazing explain video:<figure class="media"><oembed url="https://www.youtube.com/watch?v=x2Cn3vIb6gw"></oembed></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_88e69d6387c6e.png"></figure>&nbsp;<h4>FPV cap options</h4>The default is the flat top, you may mount your DIY camera on it. Besides, I&#39;ve also created 2 options to make your FPV setup easier:<ul><li>A 19-20mm top mount with a camera canopy. Print the camera mount with regular filament and glue it on top.</li><li>A mounting frame for<a target="_blank" href="https://betafpv.com/products/pavo20-brushless-whoop-frame?variant=40240553558150" rel="nofollow noopener"> a special O3 camera module</a> taken from BetaFPV Pavo 20 O3 module, can be purchased from their website. It&#39;s the most affordable and lightest O3 frame I&#39;ve found, and it even includes dampers for stabilization. This setup works great, and I highly recommend it.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-11_1bc35ff10bddd.png"></figure>&nbsp;<h4>Motor mount options</h4>The default motor mount fits 1304 to 150x motors, which are plenty for this small plane. You can try other motors, but remember, larger motors are heavier. You&#39;ll likely need to adjust the canopy to fit larger batteries and keep the center of gravity (COG) correct.By the way, the EDF didn&#39;t hit the advertised 200g thrust, only reaching 140g. However, it&#39;s still flyable and looks very cool.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-09_df23095ee762e.png"></figure><h4>Sled options</h4>The spring-loaded sled is for hard surfaces like rocky roads and off-road terrain. Hard surfaces can easily damage foaming parts, so a spring can effectively absorb the vibration and impact, thus protecting the body.&nbsp;For soft surfaces, like grass fields, a hard sled is sufficient.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-11_fdac8165e7127.png"></figure><h4>Nose options</h4>If you prefer not to mount the camera on top, you can use the camera nose instead of the standard one. It also accommodates a 20mm camera frame for an FPV camera. However, placing the camera at the very front of the wing is quite risky.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416378/design/2024-04-11_dbbe92cb33b76.png"></figure>  /*-----------------------------------------*/<h2>More Vids</h2>BetaFPV Pavo 20 O3 modual on Breeze MX test video.<figure class="media"><oembed url="https://www.bilibili.com/video/BV1b1421o7c6/?share_source=copy_web&amp;vd_source=b546a6d9597e02729926794ebfed558e"></oembed></figure>  /*-----------------------------------------*/<h2>Tips</h2><ul><li>Rotate your flight controller by 90degree to save some space for battery.</li><li>Use fast servos, this is a agile wing.</li><li>Get the COG right,</li><li>Don&#39;t tilt the ailerons up like you might on other wings. This wingfoil already includes that effect, and the twist-wing design also contributes to pitch stabilization.</li></ul>&nbsp;

Breeze Mode X [SUB250 FPV Flying Wings] RC plane

drone

Andre P

<h4>Gone down the deep end on Multiboard? Me too!</h4><a target="_blank" href="https://makerworld.com/en/@Andrepadua/collections/1314059" rel="nofollow noopener">Check out my collection of Multiboard Models here!</a>&nbsp;CommentsI wanted to use @Starbuck ‘s <a target="_blank" href="https://makerworld.com/en/models/216791?from=search#profileId-235830" rel="nofollow noopener">Spool Holder</a> but it was yanking out the snaps. Using the Weight Bearing Snaps listed <a target="_blank" href="https://thangs.com/designer/Keep%20Making/3d-model/Weight-Bearing%20Directional%20Snap-989145?affiliateCode=hendricks" rel="nofollow noopener">here</a> worked better, but then the tiles themselves started to flex, making the spools look crooked. I didn’t want to take apart my entire multiboard to add more 8mm spacers and hundreds of screws to the wall, so i designed a custom screw that would hold onto the tile, create a push-fit hole, and extend exactly 8mm beyond the tile so that it rested on the wall.&nbsp;By screwing onto the tile and resting on the wall, problem is solved!&nbsp;&nbsp;

Multiboard Screw - Push Fit with 8mm Spacer

Multiboard 

Chrobakx

I want to thank you all for the boost coupons you sent me. I really appreciate them.&nbsp;This is my version of Articulated crystal dragon.Print the outer walls slow, keep cooling on, clean your bed and your dragon will be fine.When removing from build plate, be careful not to brake any chain links. You can wait for build plate to cool down.Do not scale down, it will be fragile.

Articulated crystal dragon

articulated 

Quest 2

SabreDesign

Modern and fun Easter Egg with bunny ears. Easy print and great for spring/easter decoration.&nbsp;Large egg has a big enough hole to fit a tea light, and when you used a light or transparent filament you will be able to see the light shine through the model. The large egg is 193mm tall and small egg 135.  Both models are hollow to save on filament and print profiles are set to print 1 wall with 0 infill. Modern easter egg decoration. Large egg is compatible with tealight (use light or transparent filament in this case).  If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile: <img src="https://makerworld.bblmw.com/makerworld/draft/836498/2024-03-03_6bc3f03fe3747.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836498/2024-03-03_4688742943ee.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836498/2024-03-03_d58f2e408f3c6.png">

Easter Egg with bunny ears

pasen

Prilchen.de

Das schöne Slim Raspberry Pi 5 Case von User extrawitz wurde hier, für den RPi5 der mit einer NVME-Adapterkarte über dem Board erweitert wurde, vergrößert und die Anschlusslöcher angepasst. Weitere Deckel können beim User extrawitz geladen werden. Eine Version für Raspberry Pi 5 plus NVME Adapter unter dem Board gibt es hier:https://makerworld.com/en/models/167810&nbsp;The beautiful slim Raspberry Pi 5 case from user extrawitz has been enlarged and the connection holes adapted for the RPi5, which has been extended with an NVME adapter card. Further covers can be downloaded from User extrawitz. Weitere Details zu den Adapterkarten Umbau:Further details on the adapter card conversion: https://prilchen.de/ssd-festplatte-direkt-an-dem-raspberry-pi-5-betreiben-mit-passendem-3d-druck-case

Raspberry Pi 5 plus NVME Adapter Top

Raspberry Pi 

Cheems Moon

The Best Pin Challenge ver.FU-1

calibration

megatolusalen

These are earrings and chest jewel from princess daisy in Mario bros. As the original model has copyright you cannot sell it as this is not allowed. You should print three things, two small flowers for the earrings and one bigger for the chest. The earrings then should be glued to earring stud, it looks good. How to use: If you want to put your earrings, you should glue your preferred earring studs. For the chest you can use a safety pin.

Daisy earrings and brooch from Daisy Princess in Mario Bros

Prime Tower

Umbreon from the Pokemon Game series by Nintendo.

Pokemon-Umbreon-Multi Color 

pokemom 

JDJDJD

<h2><img src="https://makerworld.bblmw.com/makerworld/draft/693332/2023-10-20_f597d805fa3e9.gif"></h2>The TopProp is very stable and thoughtfully designed to prop your glass lid open for venting.&nbsp;Venting is recommended by Bambu Lab in many situations, for example when using PLA on the Textured PEI plate and Smooth PEI plate.&nbsp;The TopProp provides 30 inches of venting across the top of your machine.&nbsp;Featuring a stylish design with the perfect angles for supporting your glass top, TopProp also includes a handy magnetized hanger making use easy, quick and enjoyable.&nbsp;<ul><li>No Brims</li><li>No Overhangs</li><li>No Supports</li></ul><h3> </h3><h3>Magnets:</h3>Magnets can be easily pressed into place. Several magnet diameters are supported and can be up to 7mm in height.&nbsp;<ul><li>10mm diameter magnets</li><li>8mm diameter magnets</li><li>6mm diameter magnets</li></ul>&nbsp;<h3>Print Orientation Requirements:</h3><ul><li>TopProp: Side on bed</li><li>TopProp Hanger: Large flat side on bed</li></ul>&nbsp;<h3>Tips:</h3><ul><li>The side of the machine has some internal metal components that work with the magnets. The best locations on the sides are near the front and back corners (see image examples). However, if you want your TopProp even more secure you can simply use a small loop of gift wrapping tape on the backside of the hanger in conjunction with the magnets. It’s best to install the tape with the open ends of the looped tape facing up and down (vs side to side). This prevents the tape from rolling.</li><li>Magnets can be stacked up to 7mm in height for added strength.</li><li>I don't set my AMS on top of my machine, instead I use a shelf above my printer. Extra weight on top raises the center of gravity and can create a swaying effect. As such, this is designed around no AMS on top. It's also possible to print two TopProps and use them on the right and left corners - they fit there, too.</li></ul>

TopProp - Lid Lifter Vent For Glass Top

bambu as

apex3D

<h3>Model</h3>I designed poop chute which is slim and shall fit with spool on the back of your machine. Use 4 magnets to secure it.&nbsp;Alternatively you can try this model for <a target="_blank" href="https://makerworld.com/en/models/73709#profileId-78165" rel="nofollow noopener">enclosed chute</a>&nbsp;Features<ul><li>self-locating in both directions</li><li>no supports</li><li>only 51g</li><li>optimized profile for quality surface</li><li>notch to hide seam</li><li>pressfit magnets 6x3mm, no glue</li></ul>