Antonio Melgar

A beautiful set of bookmars with a different pictures in a galactic theme.The full set is to be printer together. It&#39;s designed in such a way which makes this possible with color changes at layers. Filaments Used: <a target="_blank" href="https://eryone3d.com/collections/anniversary-sale/products/matte-pla?ref=uqcriwyg" rel="nofollow noopener">PLA EryOne Galaxy Black</a> Transmission Distance: 0.1<a target="_blank" href="https://s.click.aliexpress.com/e/_DECfxy3" rel="nofollow noopener">PLA Jayo Meta Gray</a> Transmission Distance: 3.5<a target="_blank" href="https://s.click.aliexpress.com/e/_DmomSkb" rel="nofollow noopener">PLA+ Jayo Silk Bronze</a> Transmission Distance: 1.1<a target="_blank" href="https://s.click.aliexpress.com/e/_DmomSkb" rel="nofollow noopener">PLA+ Jayo Silk Gold</a> Transmission Distance: 2<a target="_blank" href="https://kingroon.com/collections/3d-printer-pla-filament?sca_ref=6268797.MtX4KIZPrO" rel="nofollow noopener">PLA KINGROON WHITE</a> Transmission Distance: 6.9  Swap Instructions: Start with Galaxy Black / Black At layer #7 (0.64mm) swap to Dark Gray At layer #9 (0.8mm) swap to Bronze At layer #12 (1.04mm) swap to Gold At layer #13 (1.12mm) swap to WHITE for the rest. If you like my work, drop me a follow!🤜🤛 How to do more than 4 colors on a single AMS? To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges. Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493821/design/2024-04-18_0f99fb49a11e7.png"> Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4 Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493821/design/2024-04-18_55b3ae6ccce94.png"> This will allow you to Change the rolls of filament once the printer is done with that color. For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need! If you like my work, drop me a follow!🤜🤛

"Galactic Wonders" - Bookmarks set

marcapaginas

GlennovitS 3D

Need boxes to store and organize your bits and pieces, screws and bolts - or just organizer your messy drawer in your desk? - then print some Gridfinity boxes! These are quicker to print than the original versions - and use less filament.They are of course stackable - meaning that you can stack fx. 2 boxes of 6u height - and they will match 1 box of 12 height. Arrange and rearrange your drawer content with ease!If you print the very thin versions, it’s not recommended to use for heavy items that needs to move around all the time. But if it’s just to seperate items in a drawer, and not move around, print whatever version fits you and your nozzle size. These are for you who doesn't need the magnet part of the Gridfinity system.<h3>Sizes</h3>There are over 500 sizes/files - ready for you to download for free. They are organized in folders with different dimensions. It’s the thickness of the walls - from 0.4 mm to 1.6 mm. Within each folder are alle sizes of boxes. (Download the complete set and sort by name to easily find the sizes you need)<figure class="image image_resized image-style-align-right" style="width:357px;"><img src="https://media.printables.com/media/prints/478527/rich_content/2c224f57-e9ae-48de-a63b-f8f67d97ee6d/thumbs/cover/800x600/jpeg/img_0224.webp"></figure>Files are named AxBxCxD<ul><li>A: Width of the box (each section is 42 mm)</li><li>B: Length of the box (each section is 42 mm)</li><li>C: Height of the box (each section is 7 mm - fx. 6u = 42 mm heigh)</li><li>D: Thickness of walls (fx. 0.4, 0.6 or 0.8 mm to fit nozzle sizes)</li></ul>Boxes come in sizes from 1x1 (42x42 mm) to 6x6 (252x252 mm)Select the wall thicknesses that fit the nozzle you have on your printer:<ul><li>0.4 mm nozzle<ul><li>0.4 mm for single wall (very thin but super quick!)</li><li>0.8 mm for double wall (stronger but still quick)</li></ul></li><li>0.6 mm nozzle<ul><li>0.6 mm for single wall (thin but very quick!)</li><li>1.2 mm for double wall (stronger but still quick)</li></ul></li></ul><h3>Assembly</h3>To organize the boxes in a drawer or on the desk, use the baseplates for the gridfinity system. Use the model here : <a target="_blank" href="https://makerworld.com/en/models/63561#profileId-66528" rel="nofollow noopener">https://makerworld.com/en/models/63561#profileId-66528</a><h3>Print instructions</h3>These tips can maybe help<ul><li>Speed on first layer: 50% (or less) (To ensure good bed adhesion and perfect fit)</li><li>Supports: NO supports - that would prevent you from spinning the faces afterwards.</li></ul>&nbsp;Happy printing!&nbsp;Want to show your support?You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D</a>&nbsp;And special thanks to Zack Freedman

Gridfinity Box (Quick print, lite version, less filament!)

gridfinity

chippwalters

Use my print profile for best results, I cannot guarantee print profiles by others.&nbsp;Here are 18 different Christmas ornaments that print really fast: under 2 hours for each plate of 9 ornaments. Only 3 filament swaps total per print. Two different build plates.The 3mf file has all the filament changes built in.&nbsp;Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Basic BambuLab Green Transmission Distance: 8 PLA BambuLab Matte Ivory White Transmission Distance: 4Swap Instructions: Start with Charcoal At layer #7 (1.4mm) swap to Scarlet Red At layer #12 (2.4mm) swap to BambuLab Green At layer #19 (3.8mm) swap to Ivory White for the rest.  &nbsp;

18 different Christmas Ornaments for A1-mini and Bambu 

navidad

TheDome

This is an alternative to the Ikea Skâdis table mounts (<a target="_blank" href="https://www.ikea.com/de/de/p/skadis-befestigungsbeschlag-weiss-10320789/" rel="nofollow noopener">https://www.ikea.com/de/de/p/skadis-befestigungsbeschlag-weiss-10320789/</a>) which are only rarely available in Germany.&nbsp;What you need (per holder):<ul><li>1x M4x20 cylinder head screw</li><li>1x M4 nut</li><li>1x fretsaw clamp with max. 5mm chip range (like this -> <a target="_blank" href="https://www.hornbach.de/shop/Laubsaegezwinge-Heckenrose/5017552/artikel.html" rel="nofollow noopener">https://www.hornbach.de/shop/Laubsaegezwinge-Heckenrose/5017552/artikel.html</a> OR <a target="_blank" href="https://smile.amazon.de/Schiessel-Laubs%C3%A4gezwinge-vernickelt-Spannweite-50/dp/B005K1SHHM/ref=zg_bs_2077106031_4/257-1095459-9431710?pd_rd_i=B005K1SHHM&psc=1&tag=thingiverse09-20" rel="nofollow noopener">https://smile.amazon.de/Schiessel-Laubsägezwinge-vernickelt-Spannweite-50/dp/B005K1SHHM/ref=zg_bs_2077106031_4/257-1095459-9431710?pd_rd_i=B005K1SHHM&psc=1</a>)</li></ul>

Ike Skadis Table Mount

skadis

EV3R3TT08

I have been working on an acrylic enclosure for My A1 along with my daughter&#39;s A1 mini. Both of our A1 series printers live in the Garage with my X1carbon. With dust and Enviromental temp changes I wanted to create a more stable space for the A1&#39;s. As I have been finalizing the design of the chamber, I&#39;m exporting the pieces one by one. I will add each piece of the final assembly on Maker world for anyone who wants to try the same project! I hope you find use for the parts! Happy printing.&nbsp;I have been printing the prototype parts in PLA on the strength preset, only changing the infill to Gyroid. The final assembly I&#39;m using PETG-CF just for the reassurance. I&#39;m sure PLA or one of its variants would be fine, but I do love overkill.&nbsp;Print flat on the bed (either side) and no supports. Printed great every time for me. Happy printing.

A1 Enclosure Corner Bracket

piezas ensamble

finleymeinengel

Organizer Box

mariola

IXPatch

This is a tiny folding chair. It prints in place, no supports or assembly required. When unfolded, it stands approximately 8.5cm (~3.3") tall. Enjoy :)

Tiny Folding Chair (print-in-place)

mini cosas

<figure class="table"><table><tbody><tr><td style="border:4px solid hsl(30, 75%, 60%);">Welcome to GlennovitS3D - fun models for everyone! Join the Club on Printables.com to support creation of new models, get access to exclusive models, and get commercial rights, to sell prints of my models.<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">Join today - GlennovitS3D</a> - or check out my <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D" rel="nofollow noopener">model collection</a> 😁</td></tr></tbody></table></figure><h2>Updates</h2>26. Feb 2024 - Uploaded new version: Inserts with French text (in both Slim and Duo) - but with a maybe more common order of days than the first french version. Thanks for the input in comments! And thanks for sharing images of your prints in nice colors!19. Feb 2024 - Uploaded new versions: Inserts with Dutch, Spanish and German text (in both Slim and Duo)! Thanks for the suggestions and for sharing images of your prints!11. Feb 2024 - Uploaded new versions: Inserts with French text (in both Slim and Duo)! And new Duo version with 1 bigger space pr. day. Both new versions made from requests by fellow makers on MakerWorld. Thanks for commenting, printing and sharing!<h2>Description</h2>Pill organizer for a week, but covered in beautiful textures. They feel awesome in the hand, looks great! Can be easily stacked in the closet/drawer if more than one in the family needs one.<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/862173/2024-02-07_e6727da3d01bd8.jpeg"></figure>The pills are sorted by day to easily take what you need - nothing more, nothing less! And it is easy to get the pills updue to the fillet-design in the bottom of each space.Helping people to take their medication - that is a cause close to my heart! (Wanna know why? - read further down..)<h2>Overview</h2>For now i comes in 2 sizes to fit different needs:<ul><li>Slim - 1 space pr. day</li><li>Duo - 2 spaces pr. day (fx. morning + evening meds)</li><li>Duo - 1 BIG space pr. day</li></ul>Both sizes come in the following versions.<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/862173/2024-02-07_aad4f6a13c5d5.jpeg"></figure><h2>Versions</h2>The Inserts comes in different versions of text:<ul><li>No text (possible to add custom text in slicer)</li><li>English - Monday to Sunday</li><li>English - Sunday to Saturday</li><li>Danish - Mandag til Søndag</li><li>French - Dimanche to Samedi</li><li>French - Lundi to Dimanche</li><li>Dutch - Maandag to Zondag</li><li>Spanish - Lunes to Domingo</li><li>German - Montag to Sonntag</li></ul>(If you want the text in another language, please leave a comment and I’ll see what I can do)&nbsp;The Covers comes in 4 styles for now:<ul><li>Simple - all smooth and quick to print</li><li>Tiles - pointy squares (my personal favorite!)</li><li>Pill Shapes - thick line cutouts</li><li>Spiral - extrusion spinning around the cover</li></ul>Combine the size, cover texture and colors to pack your medication beautifully!<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/draft/862173/2024-02-07_d5c048f1edb3f8.jpeg"></figure><h2>Assembly</h2>Nothing to do here - just print and fill up to use it - and slide the Insert into the Cover!The Inserts have a flexible lock on both sides, to keep the Insert in the cover without sliding out. If the Insert is a little tough to slide in/out, maybe sand a little on the side-locks on the Inserts. But don’t over-do it..<h2>Print instructions</h2>This is pretty simple, but here is a few tips:<ul><li>Supports: No</li><li>Brim: Yes (for the covers standing, a brim can help ensure bed-adhesion)</li><li>Infill: 10% for Inserts - 0% for Covers (to save filament)</li><li>Orientation: The models are oriented in the correct print position</li></ul>Happy printing!<h2>Why this means a lot to me!</h2>I personally live with epilepsy, and just within the last month, I forgot my medication once. Result: I had an epileptic seizure in front of my family. It’s horrifying to wake up after about an hour, not knowing what just happened. No warnings before, no idea what went wrong. But on the other side, it’s not at all fun to be the family either - a wife who knows what’s happening and needs to explain that to 2 + 5 year old kids, seeing their dad lying on the floor shaking. So when I saw the contest for pill organizers, I knew I had to do at least one design! If my design can just help 1 other person, I would be so happy!

Sliding Pill Box (textured box weekly medication)

organización 

Xtronchox

Llavero para carrito del supermercado con logo de Bambulab Paredes: 3 Relleno: 15% Altura de Capa: 0.2 Supermarket cart keychain with Bambulab logo Walls: 3 Filling: 15% Layer Height: 0.2

SuperMarket coin trolley keyring Llavero para Carrito supermercado moneda replacement

llaveros

angrelou

Update 03/03/2024Thank you all for the support. I uploaded a new design of Darth Vader's signature ship, the TIE Advanced x1.&nbsp;Hello everyone, I know there are already designs for this model, but the reason I created a new design is to make it compatible with color (ams).As you can see, it has a more complete design by having more pieces and details, such as color on both sides of the wings, which makes this design unique.Tips: 1.- Remember to calibrate the bed before making this design. 2.- It is designed to use a bit of force and not require glue.If you liked the design, check out my profile and subscribe, you won't regret it.

Tie Fighter kit card Star wars 

kit cards

TrendtB

A print-in-place hanger for your Make My Sign designs to swing! Customize your sign using Make My Sign, and proudly display it with this handy model!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/208543/2023-11-27_952f46ec94abc.gif"></figure>&nbsp;I designed this hanger as a quick and easy way to display your creations from <a target="_blank" href="https://makerworld.com/en/makerlab/makeMySign" rel="nofollow noopener">Make My Sign</a>.&nbsp;<h3>PERFECT FOR</h3><ul><li>Table numbers for cafes, weddings, or your next party!</li><li>Social/status indicators for your desk (Do not disturb, be right back, etc.)</li><li>Warning signs and labels for equipment in use, under maintenance..</li><li>QR codes for Wi-fi, menus, and sign-in</li></ul>&nbsp;<h3>FEATURES</h3><ul><li>Quick print-in-place design</li><li>Folds down flat for easy storage</li><li>Only 6.4g of filament for the frame!</li><li>Opens up to 60 degree spread for stability</li><li>Can hang up to 3 signs if you want to keep variants together</li></ul>&nbsp;<h3>INCLUDED SIGNS</h3>I've included a bunch of signs to get you started, all generated through Make My Sign. Some were based on custom SVGs designed in Figma.Each sign is on a separate plate so you can pick and choose which ones you want to print.<ul><li>Back Soon status</li><li>Focusing status</li><li>Working status</li><li>Chatty status</li><li>In Progress status</li><li>Printing status</li><li>Table number</li></ul><figure class="image image_resized" style="width:69.87%;"><img src="https://makerworld.bblmw.com/makerworld/draft/208543/2023-11-27_88e345b892073.png"><figcaption>Multiple “Make My Sign” designs included</figcaption></figure>Sign designs powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)&nbsp;<h3>HOW TO CUSTOMISE YOUR SIGN</h3>Go to <a target="_blank" href="https://makerworld.com/en/makerlab/makeMySign" rel="nofollow noopener">Make My Sign</a> and create a new design. The design supports signs with the following specifications: <ul><li>Rectangle plate, 1mm thick (default thickness)</li><li>60mm width</li><li>UP TO 65mm height</li><li>ON THE BOUNDARY, DOUBLE TOP holes, 4mm</li></ul>Make My Sign settings:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/208543/2023-11-27_cf98ee3e809e7.png"><figcaption>Plate configuration for making your own sign, compatible with this stand</figcaption></figure>You can then export the .3mf file and print your new sign to hang!&nbsp;&nbsp;&nbsp;&nbsp;

Print-in-Place Hanger for Make My Signs

taller

Every Day Counts

This version of my Wheelie bin provides a front mount for a badge generated by Make My Sign from MakerWorld.&nbsp;When assembled this is 250mm high x 160 square (approximately). Thats 10¾&#34; high x 6½&#34; square. It&#39;s not recommended to scale this print downwards as the wall thickness will become too thin.&nbsp;Make a badge to suit yourself - whatever your little heart desires.&nbsp;The badge can be adhered to the top lid or in the space provided on the body of the bin (or go wild and do both).&nbsp;Creating a badge<ol><li>Visit Make My Sign from MakerWorld (makerworld.com/makerlab/MakeMySign)</li><li>Press the ‘Create from Blank’ button (near the top)</li><li>Choose the ‘Attention sign’ template</li><li>Change the dimensions to 62mm x 62mm.</li><li>Set the corner radius to 11mm.</li><li>Set the thickness to 1mm.</li><li>Change to Thickness for ‘Text and Sticker&#39;, ‘SVG ’and &#39;Shapes’ to -0.6mm</li><li>Style the badge as you want</li><li>When complete, download the design and open in Bambu Studio for printing.</li><li>Add to the Wheelie bin lid or body with glue or double-sided tape.</li></ol>&nbsp;&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)

Wheelie Bin with badges from Make My Sign

cocina

Xykit

This 3D printable book holder / drawer cabinet can be made into a variety of configurations. Just keep it on your end table, night stand, or coffee table. Tuck your reading glasses in the cubby, and add some drawer stackers to store pens, a highlighter, the remote, or little trinkets nearby. The drawers are accessible from either side of the cabinet and come with two variants, with and without alignment top pins. Stack them up and let gravity hold them in place, or for a more permanent connection you can glue the boxes together with super glue or epoxy.&nbsp;The .ZIP folder contains all the files and drawer boxes, the Bambu .3MF file has the build configuration featured in this <a target="_blank" href="https://youtube.com/shorts/JUrOcDxqXPA?si=yyoIZKbRwlQ-271E" rel="nofollow noopener">video</a>.  The main foot print is approximately 175mm x 175mm, the height will vary depending on how many drawers you add and whether or not you use the base.All pieces are positioned in the their intended Support-Free printing position.Pieces Included (for both .3MF &amp; STL file types):<ul><li>Book House Tent (top triangle piece)</li><li>Drawer Stacker Narrow (x2, with and without top alignment pins)</li><li>Drawer Stacker Large (x2, with and without top alignment pins)</li><li>Drawer Narrow (x2, divided and open)</li><li>Drawer Large (x2, divided and open)</li><li>Base</li><li>Feet (x2, angled and straight)</li><li>Thumb Page Holder (x4, two sizes, and two hole variants)</li><li>Xyklip (for connecting feet)</li></ul>The Book House and drawer stackers are all designed to fit in a build volume of 180mm x 180mm x 180mmDesigned to hold books in the 6-9 in height range.Recommended FDM Print Settings:<ul><li>Nozzle: .4mm</li><li>Layer Height: .2mm (save a little time by using .24mm layer height)</li><li>Infill:10-15%</li><li>Shells: 3</li><li>Supports: NONE</li></ul>*digital files only, you will receive the .STL/.3MF files to 3D print these models yourself, no physical product will be shipped.**Files/models for personal use, and subject to our terms of use at <a target="_blank" href="https://xykit.com/" rel="nofollow noopener">xykit.com</a>&nbsp;If you would like to be a merchant and sell physical 3D print of the designs you can sign up for our <a target="_blank" href="https://xykit.com/pages/xykits-monthly-subscription-file-drops" rel="nofollow noopener">subscription merchant program here</a>.

The Book House - Modular Book Holder and drawers

Cuarto

Supergrapher

Update:I&#39;ve created a new version taking in all the suggestions and feedback, check it out here<a target="_blank" href="https://makerworld.com/en/models/486153#profileId-398821" rel="nofollow noopener">https://makerworld.com/en/models/486153#profileId-398821</a>&nbsp;I&#39;ll keep this version available for those who need a simpler solution or need to print replacement parts.&nbsp;Keep your filamant dry with the SUPER AMS Lite Spool Enclosure!&nbsp;The major advantages of the enclosures are…<ol><li>Lightweight</li><li>Easy to print (No support needed)</li><li>Requires minimal additional parts (only a PTFE tube and connector)</li><li>Compatible with the Bambulab AMS Lite Top Mount</li><li>Option for adding your own Hygrometer</li></ol>InstructionsInstall the spool support, this prevents the enclosure from sagging.<figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000188758/design/2024-04-05_9167bf55760958.jpeg"></figure>Install pneumatic connectors(6mm) with 10 cm of PTFE tubes. <figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000188758/design/2024-04-05_aec033926629f.jpeg"></figure>Install your filament.<figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000188758/design/2024-04-05_5215459e023518.jpeg"></figure>Click the enclosure into position.<figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000188758/design/2024-04-05_4d346384b7d62.jpeg"></figure>Insert dessicant packs into the side pockets.<figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000188758/design/2024-04-05_36b856387e6cb.jpeg"></figure>All Done!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000188758/design/2024-04-05_516157780b71b.jpeg"></figure>

SUPER AMS Lite Spool Enclosure

Ams litle

vitaprint 3D

This is a perfect Box for your Bambu Lab Spare Parts. I made all Bambu Lab printer Models to a Lid Design.You need foloowing Screws to complete it:&nbsp;<ul><li>M3 x 30 = 4 pcs (for the Hinges)</li><li>M3 x 35/40 = 2 pcs (for the Handle)</li></ul>&nbsp;Big Box:230 x 210 x 70<a target="_blank" href="https://makerworld.com/en/models/105260" rel="nofollow noopener">https://makerworld.com/en/models/105260</a>230 x 210 x 140<a target="_blank" href="https://makerworld.com/en/models/92348" rel="nofollow noopener">https://makerworld.com/en/models/92348</a>&nbsp;Small Box:175 x 130 x 110:<a target="_blank" href="https://makerworld.com/de/models/97173" rel="nofollow noopener">https://makerworld.com/de/models/97173</a>175 x 130 x 70:<a target="_blank" href="https://makerworld.com/de/models/408354" rel="nofollow noopener">https://makerworld.com/de/models/408354</a>

Bambu Lab Box L A1 Mini / P1S / A1 / P1P / X1C

braga3dprint

The 3D model of a lightbox featuring an Air Jordan shoe offers a unique and customizable piece of art. Unlike the iconic red typically associated with Air Jordan, this design lets you pick the color that resonates with your personal style and preferences. Showcasing the unmistakable silhouette of this legendary sneaker, the lightbox is a versatile addition to any sneakerhead's collection. Its captivating design pays homage to the world of sneakers and allows you to express your individuality by choosing the perfect color to match your space. Shine a light on your love for sneaker culture with this adaptable and stylish lightbox. 👟💡 If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING!- remove purge line at the beginning of the print!&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - remove purge line at the beginning of the print! - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Air Jordan Nike Lightbox LED Lamp

Frikadas

a.vdh_1983

If you like my work, i'm open for donations via Paypal. It is much appreciated.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL</a>&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.8 PLA BambuLab Basic Red Transmission Distance: 4.8 PLA BambuLab Basic Gold Transmission Distance: 4.8 PLA eSUN White Transmission Distance: 1.6Swap Instructions: Start with Black At layer #20 (1.68mm) swap to Red At layer #22 (1.84mm) swap to Gold At layer #23 (1.92mm) swap to White for the rest.&nbsp;Reminder:My models mostly cover the entire bed, this means the purge line is sometimes running through the bottom of the print. You have 3 options here: - Leave as is, you can just cut them of afterwards. - Remove immediately after the purge line is printed. - Scale the model:*** WARNING *** WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT! The Z-height must always be as original, otherwise the print is messed up.