nechromus

FlorinV

I know there are other racks and holders for paints, but I wanted something a bit different, more flexible and still simple to print, without using more filament than needed.<ul><li>Minimal footprint and filament use, but still very strong. For 28 bottles version with 26mm bottle size: estimated print time 7.6h and 248gr filament.</li><li>Good visibility of bottles and also good grip. (not easy to flip them over)</li><li>Fusion 360 file included, designed to easy change the bottle size and number of columns. (just change 2 parameters; please check the print screens bellow for more info)</li><li>Available profiles and tested for Vallejo bottles: 17ml and 60ml. The hole sizes are: 26mm and 36.8mm. Each profile contains several models with different number of columns. (e.g. 1, 3, 5, 7) Each column has 4 rows.</li><li>Simple to print, without any supports. If you generate other sizes using the fusion file, please arrange the model on the plate similar to how I did it in my profiles. (upside down, as this is how I designed the model and the most efficient way to print them without issues)</li><li>There is no special design to attach different models between them, but you can easily glue them together. So, you can add from time to time another set of columns, as you need them or even glue together different bottle size columns. </li></ul>How to change the bottle size and number of columns, if you need something different than already available in my profiles:<ul><li>open the file in fusion 360 and go to: Modify → Change Parameters (as shown bellow)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000237584/design/2024-03-08_e9416dcfadd5c.png"></figure><ul><li>Change the size value and/or columns value:</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000237584/design/2024-03-08_c958e077a5969.png"></figure>

Customizable Paint Rack

Painting

nvthblake

This is an insert for Grand Austria Hotel + Lets Waltz expansion + Upgraded componentsAll the Expansion modules are kept separate from the base game content. Each module has its own slot.Support sleeved cards (except for Solo cards. However, if you use thin sleeves on these solo cards, the deck might fit in the slot)Card Trays and Resource Trays can be utilized during gameplay&nbsp;Please let me know if you have any suggestions or questions. Happy Printing!!&nbsp;

Grand Austria Hotel + Let's Waltz Expansion Organizer

Brettspiele

Fletch

This is one of my all time favorite games and locations. This map always reminds of the fun I had playing A Link to the Past with my siblings for hours when we were younger, hunting for the Master Sword or finding all of the chests in the dungeons throughout the world. Makes a great addition to any game room or just some wall art. I tried to make it as accurate as possible. With the size of model, I wasn&#39;t able to add some of the smaller details since they wouldn&#39;t print well. I hope you enjoy it!&nbsp;You can find the Dark World map here:<a target="_blank" href="https://makerworld.com/en/models/456194" rel="nofollow noopener">Zelda A Link to the Past - Dark World</a>&nbsp;A frame stand for displaying on a bookshelf or table can be found here:<a target="_blank" href="https://makerworld.com/en/models/456210" rel="nofollow noopener">Zelda A Link to the Past Map - Frame Stand</a>&nbsp;There is a separate profile for a frame with a hole in the back for hanging on the wall.&nbsp;ColorsGray - Overture PLA Plus Space GrayLight Brown - Overture PLA Plus BrownDark Brown - Hatchbox PLA BrownLight Green - Inland PLA Matte GreenDark Green - Elegoo PLA GreenBlue - Hatchbox PLA BlueRed - Hatchbox PLA RedBlack - Elegoo PLA Matte BlackYellow - Hatchbox PLA Yellow&nbsp;ProfilesThere are multiple profiles available to account for no AMS, one AMS, or two AMS. I have included mini profiles as well. It takes 9 colors to do the full color map and frame and I have provided a profile that will allow you to print all 9 colors using a single AMS.

Zelda A Link To The Past Map

Toys

PrintMint

Bring the captivating beauty of Stormy Dreams into your living space with our DIY Wall-Mounted Cloud Night Light. Crafted for both simplicity and enchantment, this unique night light assembly seamlessly combines a 3D printed Cloud and Lightning Plate with a battery-powered LED light, allowing you to create your own magical stormy scene on the wall.&nbsp;You can use any of the  Bambu LED strips in the BOM. The one i used is here:https://www.amazon.com/dp/B0C3LZR1FX?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details

Stormy Dreams: Cloud Night Light w/ Lightning Bolt

Beautiful

Hugo

<h2>Update : I added the money clip There is now a version with and without money clip in the back.</h2>&nbsp;This is the second version of my cascade card wallet, featuring a similar appearance but thoroughly revamped.<h4>Filaments used in the pictures : <a target="_blank" href="https://formfutura.com/?aff=7" rel="nofollow noopener">Li</a><a target="_blank" href="https://formfutura.com/product/refill-petg/?aff=7" rel="nofollow noopener">nk</a></h4><ul><li>FormFutura Refill PETG Light Grey</li><li>FormFutura Refill PETG Iron Grey</li></ul>Here are the key updates:<ol><li>The new version can accommodate 6 cards, compared to 5 in the previous iteration.</li><li>The popup mechanism is now easier to detach from the printer, eliminating the need for holes in the back to crack open the mechanism.</li><li>The retention mechanism has been entirely redesigned to secure cards from the top rather than the side. This ensures more secure card placement, and the wallet is compatible with any number of cards, up to 6.</li></ol>This model still demands a highly precise printer, as the internal mechanism is separated from the wall by a mere 0.2 mm.I have not yet designed a money clip for the back, but it will be included in a future update.<h3>Printing :</h3><ul><li>Nozzle size : 0.4 mm</li><li>Layer height : 0.2 mm</li><li>PLA and PETG both work</li><li>No support needed</li><li>The STL is already oriented, the model is printed upright</li></ul><h3>Freeing the mechanism :</h3>Force on the slider to crack it open :<figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/798465/rich_content/eeee7a40-93e7-4a98-a4dd-e0b83a3a72ca/20240310_165015.jpg#%7B%22uuid%22%3A%226fac39e0-5c87-4b27-a4d5-f723c113ad5e%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"></figure>If it is not enough, you can push the pivot on the back :<figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/798465/rich_content/ebdb1922-7c49-48e6-b2dc-037afe421c6a/20240310_165005.jpg#%7B%22uuid%22%3A%225b8ad44e-f5c1-49dc-be6b-8d84b6ee539c%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"></figure>Enjoy :)

Cascade card wallet V2

Praktisch

Brad - FTBT 3D

I wanted a way to store my 80 piece Bambu Lab filament swatch samples in a clever and satisfying way. Most of the raising holders only held 40, raised swatches up uniformly, and used bearings. I wanted something that could be fully printed, no bearings. And this design raises the swatches up, then abruptly drops them down so you can really see the one in the front and grab it easily.You don't need Bambu Lab swatches for this, I've included a modeled up blank you can use and customize or label on your own.Print Settings:<ul><li>Top Layer Height: 0.20mm</li><li>Bottom Layer Height: adaptive or 0.10mm (for smooth ramp) </li><li>Top & Bottom Surface: Concentric</li><li>Print top upside down</li><li>Use Arachne wall generator for best results</li><li>As designed it will only turn clockwise, mirror base to turn counterclockwise</li></ul>For best turning:<ul><li>Sand the ramp smooth with 220 grit sandpaper if needed</li><li>Put rubber feet on the bottom so the base won't spin while turning the top</li></ul>

Painting

Brettspiele

Toys

Beautiful

Praktisch

3d Printing