nazzarokevin57

Fletch

Last year the bugs were able eat a bunch of my strawberries, not this year! While preparing the greenhouse for spring planting, I was surprised to find that a few of my strawberry plants were already flowering. Last year I tried a net trellis with some success, however the bugs still got too many of the delicious strawberries. I wanted to try something different this year and decided to make some strawberry supports.&nbsp;I placed these on plants that had been planted in previous years, it should be easier to place them with new plants.&nbsp;I recommend letting the build plate cool for a few minutes before attempting to remove to prevent accidentally damaging the print. PETG will provide better protection against UV rays. I printed these in PLA this year and will replace them next year if needed.&nbsp;SizesFull size<ul><li>224mm W x 224mm D x 80mm H</li><li>8.8&#34; W x 8.8&#34; D x 3.1&#34;H</li><li>Center Diameter - 80mm (3.1&#34;)</li></ul>&nbsp;Mini Size<ul><li>174mm W x 174mm D x 80mm H</li><li>6.8&#34; W x 6.8&#34; D x 3.1&#34; H</li><li>Center Diameter - 62.4mm (2.5&#34;)</li></ul>&nbsp;

Garden Strawberry Support

Jardin

SK2R

tous les circuits motogp 2024 présents ici. Un like si tu apprécie le travail :)&nbsp;&nbsp;

MOTO GP TRACKS

Cadeau Joackim

Marvin_A

This coin sorter is small enough for easy storage but large enough to handle a high volume of coins. I designed this model for the scout association in my neighborhood.&nbsp;Make sure to download the version that corresponds to your country.Please note that the Japanese, UK (GBR), and Australian versions were tested with fake money only for now. I have no comments at the moment regarding whether everything is fine or not. Any comments would be greatly appreciated!Beware of warping! Consider adding &#34;mouse ears&#34; to corners if you frequently experience warping in your prints.&nbsp;*** New Version 2.0 - June 2024 (Version 1 still in files)&nbsp;What&#39;s new:<ul><li>I applied the same philosophy as Wendy&#39;s.  Why make circles when I can make squares?  Providing a larger surface area for bigger jobs.</li><li>The highest tray is consistently 220 x 220 mm regardless of the country. Each plateau that follows is two millimeters shorter than the previous one, so…</li><li>When stacked inside, no tray is higher than the others.  So for storage, 220 x 220 x 52 mm is exactly what you need.</li><li>The Australian version is now available. </li></ul>&nbsp;*** UPDATED - April 2023: Euro version Added ****** UPDATED - December 2023: For Canadian money: If you still have pennies, they will go in the dimes tray. Then you can use the extra tray to separate them. *** UPDATED - March 2024: Japanese version added as requested.*** UPDATED - March 2024: United Kingdom version added.Please note that the Japanese and UK versions were tested with fake money only for now. Comments would be greatly appreciated!  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Stackable Coin Sorter (CND,US,Euro, JPN,UK,AUS)

Projets utiles

harrypulvirenti

It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs less pronounced to make the model easier to be printed. I strongly recommend using brim to print it if you don't want to see the heel fall.You can find the suggested orientation used to print the object in the images.With the proposed orientation the object should fit without scaling it, you will maybe just need to move it a little bit into position, but some user reported that scaling it down to 95% also works well. &nbsp;I tested it with my X1C and is perfectly compatible. About the P1P the original model was compatible with the P1P without enclosure and this remix have the same compatibility

Bambu Lab - Filament Poop Bin - X1, X1C, P1P and P1S

Bambulab accessoires

Kerlou

Muticolors Traditional bridge inspired by Japanese architecture. It is very easy to print and no AMS needed.It can be a very good interior decoration element, you can put it in a Zen garden or on a shelf. It can also be a good gift or a miniature game item.&nbsp;For plate 1 : change filament at layer 23 from red to black.The spheres should be glue on top of the barriere (they are 2 more in case of losses)For plate 2 : change from black to red at layer 7. (Be warning the fisrt layer is not easy to print).&nbsp;To assemble the bridge you just have to bend the ground part and place the barrieres in the holes :)&nbsp;Do not hesitate to leave me a comment, it would make me very happy and you can check my profile to see more files. I hope you like this model :)

Japanese Bridge without AMS

Figurines

Think3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #12 (1.04mm) swap to Red At layer #17 (1.44mm) swap to Yellow At layer #21 (1.76mm) swap to White for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;

Jardin

Cadeau Joackim

Projets utiles

Bambulab accessoires

Figurines

Hueforge