natalie.oremus

Dr Operator

UPDATE 6/21/2024: The following changes were made based on feedback that I&#39;ve received.                                                                            - Increased the contact area of the slots on Waist 3 to help with stability.                                      - Adjusted plate #6 to prevent overlapping of calibration lines when using an X1C.                                      - Increased the circumferential height of both faces to prevent tilting when installed.                                      - Added additional supports to the chest.                                      - Added an additional magnet to the chest and door to help keep the door closed.                                           - Reduced the length of Hand 1 by 10%                UPDATE 5/17/2024: Seriously, all of the necessary supports have been added thanks to @SirWaynesworth and @SrGrinch. UPDATE 5/16/2024: I&#39;ve added supports for the head as per the feedback that I&#39;ve received.  I&#39;m having a lot of fun designing stuff around the MakerWorld hardware kits and up next is a Cogsworth clock using the Clock Components Kit 011 and 4x2 mm Round Magnet (20PCS) - CA001. Links to purchase both of those items are in the Bill of Materials list down the page further. When I got the hardware kit in my hands for the first time, two ideas came to me right away. This is the bigger, more complex of the two ideas. If you&#39;re not familiar with Cogsworth, he is a character from the classic Disney movie Beauty and the Beast. Notes:<ul><li>I made a “happy” face as well as the unimpressed face and the faces can be swapped at any time.</li><li> Fully assembled, it stands 312 mm or just over 12&#34;.</li><li>The Door Window colour is listed as white in the profile because there is no colour option for Transparent PLA in Bambu studio</li><li>This was fun, we should do it again sometime.</li></ul>&nbsp;Filaments used: Bambu PLA Basic - GoldBambu PLA Basic - Black Bambu PLA Matte - Dark BrownBambu PLA Matte - Desert Tan Eryone PLA - White AMZ3D PLA - TransparentAMZ3D PLA - Sakura Pink&nbsp;<figure class="image image_resized" style="width: 45.37%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-21_862053b705ab98.png"></figure>ASSEMBLY: Assembly shouldn&#39;t take long at all and while technically you don&#39;t need super glue, it is recommended for certain parts. Start with the face. For this you will need the Clock component kit, both hands, both nose pieces and the face you want to use. Insert the clock component into the back of the face and secure it with the nut that comes with the kit. From there, slide the hour hand onto the face followed by the first nose piece, the minute hand and finally the nose cap.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_2b963bbc1511c8.png">  <figure class="image image_resized" style="width: 37.41%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_ef73d37de10038.png"></figure>&nbsp;&nbsp;Now we&#39;re going to assemble the head. You will need all of the head pieces and the face. Start by fitting all four Head 2 pieces into the top of the head and then fitting Head 4 on top.&nbsp;<figure class="image image_resized" style="width: 62.78%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_34e58fcd8f6178.png"></figure>&nbsp;&nbsp;From there, slide the face into the back of the head and push it forward as far as you can. The back of the head attaches via magnets. When setting the magnets into the head and the back of the head, make sure you have the polarities correct. Once you have the head together, set it aside for now.<figure class="image image_resized" style="width: 71.85%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_daa109bace958.png"></figure>&nbsp; For the lower body, you will need all four feet as well as all four waist pieces. Fit the waist pieces over the feet as seen below, and I would highly suggest gluing that top piece down.<figure class="image image_resized" style="width: 65.32%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_e09bdb358c1618.png"></figure>&nbsp; Next up is the door. You will need the door, the door window and the Neck. The neck fits into the door and then the window attaches to the inside of the door, securing the neck in place.<figure class="image image_resized" style="width: 73.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_a64261c168d348.png"></figure>&nbsp;&nbsp;Now we&#39;re going to connect everything together. Start by attaching the legs/waist to the body, and I would highly suggest using glue to secure those pieces together. After that, attach the Arms to the body as seen below.<figure class="image image_resized" style="width: 83.04%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_e0147e75409638.png"></figure>&nbsp; Attach the head to the body with glue being highly recommended for securing the head to the body. Last thing to do is to connect the door. The hinge on the door itself has little notches and the body and door snap together using those notches.<figure class="image image_resized" style="width: 55.69%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_8e84ca12c1f21.png"></figure>

Clock Components Kit 011: Cogsworth

disney

Starbug,_Props

<div><h1>Summary</h1><div>Concept Maul mando helmet as requested by a follower.Yes i know the numbers for the horns are back to front but hey its still easy to locate where they go .205mm inside ear to ear measurement Any issues let me know</div></div>

Maul Mando Concept

kostüm

freak_23

Here is my design of a LED light for the Bambu LED Kit-001 using Lithophane panels for my 4 year old son.He loves Fireman Sam and Cars, so I came up with the idea of building a led lamp for Lithophane panels with different panels for the lamp.&nbsp;The Lithophane panels can easily made with the great Tool:&nbsp;<a target="_blank" href="https://www.lithophanemaker.com/" rel="nofollow noopener">Lithophane Generator (lithophanemaker.com)</a>&nbsp;Use the follwoing settings:<img src="https://makerworld.bblmw.com/makerworld/draft/715549/2024-02-03_e5a4f8e21d742.jpg">&nbsp;AMS is necessary for the print of color Lithophane. All other Lithophane panels can be printed in white.I will add new Lithophane panels I made from time to time.

Lithophane Lamp for LED Kit-001 Fireman Sam | Cars

deko

Mtrairsoft

easter bunny gnome

ostern

kerngebiet

Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course.The following Makita tools have been tested so far in the 40mm version:<ul><li><a target="_blank" href="https://amzn.to/43EvbGk" rel="nofollow noopener">Makita DTD171</a></li><li><a target="_blank" href="https://amzn.to/418LxoO" rel="nofollow noopener">Makita DDF484</a></li><li><a target="_blank" href="https://amzn.to/3KH0RSL" rel="nofollow noopener">Makita DDF484B</a></li><li><a target="_blank" href="https://amzn.to/3KKXTMS" rel="nofollow noopener">Makita DHP484</a></li><li><a target="_blank" href="https://amzn.to/3L1Jk99" rel="nofollow noopener">Makita DDF459</a></li><li><a target="_blank" href="https://amzn.to/41iBQUT" rel="nofollow noopener">Makita DHP481</a></li><li><a target="_blank" href="https://amzn.to/3GNdGK7" rel="nofollow noopener">Makita DTW300</a></li><li><a target="_blank" href="https://amzn.to/3UJI2D4" rel="nofollow noopener">Makita DTW302</a></li><li><a target="_blank" href="https://amzn.to/3ojGUKh" rel="nofollow noopener">Makita DHG180</a></li><li><a target="_blank" href="https://amzn.to/3obRMJP" rel="nofollow noopener">Makita DHG181</a></li><li><a target="_blank" href="https://amzn.to/46xfsJ9" rel="nofollow noopener">Festool T18+3</a></li><li><a target="_blank" href="https://amzn.to/40VRPc2" rel="nofollow noopener">Milwaukee 2553 M12 Fuel</a> **</li><li><a target="_blank" href="https://amzn.to/3TgM9rB" rel="nofollow noopener">Milwaukee 2504 M12 Fuel</a> **</li><li><a target="_blank" href="https://amzn.to/3RqUbNf" rel="nofollow noopener">DeWalt DCE530</a> **</li><li><a target="_blank" href="https://amzn.to/40XWAlF" rel="nofollow noopener">DeWalt DCD771</a> ** (seems also to fit in 35mm)</li><li><a target="_blank" href="https://amzn.to/3Gijfj2" rel="nofollow noopener">DeWalt DCF887</a> ** (seems also to fit in 35mm)</li><li>DeWalt DCF885 ** (seems also to fit in 35mm)</li><li>DeWalt DCD985 **</li><li><a target="_blank" href="https://amzn.to/40W9IHO" rel="nofollow noopener">Surebonder Ultra DT-3100FAMZS</a> **</li><li>Porter Cable PCC601</li><li>Porter Cable PCC641</li></ul>The 35mm version fits good for:<ul><li><a target="_blank" href="https://amzn.to/3L8u4HD" rel="nofollow noopener">Makita DDF487</a></li><li><a target="_blank" href="https://amzn.to/41BBmsN" rel="nofollow noopener">Makita DHP487</a></li><li><a target="_blank" href="https://amzn.to/3sUPVMj" rel="nofollow noopener">DeWalt DCD778</a> **</li></ul>The wide version fits:<ul><li><a target="_blank" href="https://amzn.to/46goMlB" rel="nofollow noopener">Makita DWT700</a> **</li><li><a target="_blank" href="https://amzn.to/46eql3g" rel="nofollow noopener">Makita DWT701</a> **</li><li>Ryobi PBLIW01 **</li></ul>Smaller tools will probably better fit in the smaller holder with a 35mm cut-out. If someone needs a different measurement, feel free to leave a comment, I'll see if I can implement this.<h3>Printing</h3>Very easy, no supports needed if printed standing. I used PETG for my prints and three walls with 20% infill. This is very solid. If you want, you can print it with 100% infill and get it even stiffer. But you will need ~220g of filament for this. ;)<h3>Update 04.05.2023</h3>I've added another design for the holder, based on the idea of <a target="_blank" href="https://www.printables.com/@mnemic" rel="nofollow noopener">@mnemic</a>. I has the same sizes as the other, but saves even more filament.<h3>Update 06.10.2023</h3>I've added a wider version of the holder, for Tools like the <a target="_blank" href="https://amzn.to/46goMlB" rel="nofollow noopener">DWT700</a> or <a target="_blank" href="https://amzn.to/46eql3g" rel="nofollow noopener">DWT701</a>. This version is identical to the 40mm default version. Only difference is, that that the inner width is 81mm instead of 70mm.&nbsp;* = Amazon Affiliate Links ** = Information from users who printed the model

Universal cordless Drill Holder/Mount (Makita, DeWalt, Bosch, Festool, ...)

werkzeug

Chris Pirillo

TK-B00, a once-dutiful stormtrooper in the Galactic Empire's ranks, had always been more than just a number. Deep beneath the cold, white armor, a flicker of individuality and conscience burned within. This spark of humanity grew more pronounced as he questioned the morality of his actions while enforcing the Empire's oppressive rule.&nbsp;TK-B00's moment of reckoning came during a pivotal mission on the forest moon of Endor. Amidst the chaos of the Battle of Endor, witnessing the destruction of the second Death Star and the Ewok rebellion, he found himself at a crossroads. He chose to defy orders, refusing to fire upon the Rebel Alliance. His rebellion was met with severe consequences - he was gravely injured and left behind by his comrades.&nbsp;In his moment of vulnerability, TK-B00's thoughts turned to the countless lives he had taken and the lives he had saved by turning away from the Empire's dark path. With his last breath, he whispered a plea for redemption, hoping for a chance to make amends. In that moment, the Force responded, granting him a chance to find redemption in the afterlife.&nbsp;TK-B00 became a wandering spirit, a guardian of the light, unburdened by the confines of his stormtrooper armor. No longer bound by the rigid conformity of the Empire, he dedicated himself to helping those in need, standing up against oppression and tyranny across the galaxy. His transformation from a faceless stormtrooper to a spectral protector, known by his comrades as the Ghost of Endor, served as a beacon of hope - proof that even those once lost to the darkness could find their way to redemption and purpose.&nbsp;Larger model sliced at .20mm layer height in the Bambu Studio:<ul><li>Black to Layer 4</li><li>Grey to Layer 7</li><li>White to Top Layer</li></ul>

Star Wars (Inspired) "Halloween Ghost" HueForge Stormtrooper

Funny

Darth Vader Chest Panel