Pix_CZ

<h2>Poop Chute Door for Bambu Lab X1C/P1S (Improved Sealing)</h2>Description:This 3D printed door improves insulation for the filament purge chute on your Bambu Lab X1C or P1S printer. Designed to fully close by gravity, it minimizes heat loss from the chamber during printing, especially beneficial for users with cold printing environments or when printing with materials like ABS or Nylon.&nbsp;Features:<ul><li>Gravity Operated: Door closes by itself, preventing heat loss during filament purging.</li><li>Easy Installation: Attaches with double-sided tape (3M 5952 VHB tape recommended) for a secure and convenient installation.</li></ul>Bill of Materials:<ul><li>1mm thick double-sided tape (3M 5952 VHB recommended)</li><li>Filament (1.7 - 1.75mm) for hinge</li></ul>Important Notes:<ul><li>Use at Your Own Risk: <a target="_blank" href="https://wiki.bambulab.com/en/general/bambu-mods-to-avoid" rel="nofollow noopener">Bambu Lab advises against modifications to the poop chute area. Use this door only if you experience significant filament purging issues.</a></li><li>Filament Selection for hinge:<ul><li>Use a straight piece of filament for the hinge.</li><li>Ensure the filament diameter is between 1.7 and 1.75mm.</li><li>Tip: Experiment with different filament types to achieve optimal hinge smoothness and stability</li></ul></li></ul>&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/821459/2024-02-19_d5063ac88512a.gif">&nbsp;Installation:<img src="https://makerworld.bblmw.com/makerworld/draft/821459/2024-02-21_5c62a59d6f6c.gif">&nbsp;

p1s

mini prints