Anders

PieSupplies

<h2>Desk Bag Hook</h2>This is a desk hook I designed to hold my laptop bag at work.&nbsp;What makes it convenient is that it fits on multiple desk sizes not just one. That way you can put it in your bag and use it wherever you are.&nbsp;<h3>Strength</h3>While I haven't done any official strength testing, you can increase the number of perimeters to increase the strength. If you're putting something heavy on it you'll want to make sure to use a strong filament like PETG.&nbsp;<h3>Sizing</h3>The uploaded model might be too large for your purposes. Users have reported that printing at 70% of the original size has worked well for them.&nbsp;<h3>3MF Plates</h3>I've uploaded a 3mf file that contains a full sized version, a 70% version, and one with no top or bottom layers so the infill is visible.&nbsp;

Desk Bag Hook

Organization

CAD-Guy

Geocaching container with PET-cork, like <a href="https://www.printables.com/de/@MatsE_357745" rel="nofollow">Mats E</a> container, just with 8x3mm magnets instead of 12x3mm<h3>Dimensions</h3>outside: 30x30x85mminner diameter is 21.5mm x 82 mm<h3>Non printed parts</h3>1x PET-cork3x Magnet 8x3mm<h3>Print instructions</h3>I printet it our of PETG with the 0,2mm quality setting (3 perimeter and 15% infill) an it tourned out perfect. In my case, no post-processing was required. Of course you can also give PLA a try but I thought PETG or ASA was the best because it will last longer outside.<h3>Additional information</h3>I used a bit of super glue to secure the magnets in the container.<h5>I would be glad to see your results and if you put it somewhere in the world of Geocaching.com post the location, maybe we can visit it sometime :)</h5>

Magnetic Geocaching container

Geocaching 

Landin

Outline:I wanted to have my bags out of the way, so I designed this simple bag hook that I've screwed into the side of an Ikea Pax. Print Suggestions:The model is designed for zero supports and optimal strength. Use the orientation in the 3D files. I suggest you print this in PETG or ABS, but it should be totally fine in PLA. I would do at least 5 walls with 25%+ infill if planning to use these with filled bags.&nbsp;Hardware:Current version is designed for 3mm flathead screws. If there happens to be a demand for modifications, I'll be happy to upload adjustments. There is another mount included if the original is too tight, as well as a step file of the mount. It's my first upload, please let me know what you think!

Heavy Duty Easy Print Bag Hook (Hidden Screws)

Ny leilighet

mcmaven

This Print Profile includes all the components you need to upgrade your AMS to use loose (silica gel) desiccant. And the additional Dry Pods allow the AMS to hold more desiccant, which will mean longer times between refreshes.&nbsp;This has been done before, in many different combinations, but I couldn&#39;t find one that met all my needs. I feel that this remix contains the best combination of AMS Dry Pod and Desiccant Containers that are currently available, and I added a Funnel to help load them with silica.  There are 3 parts included that can hold the hygrometer, only print one: 1) a Shallow Hole version with slots for the hygrometers with 30 degree tabs that can hold more desiccant, 2) a Shallow Hole version with slots for the hygrometers with vertical tabs that can hold more desiccant, and 3) a Thru Hole version with 30 degree slots for the hygrometer tabs, designed by FLAP_design, where the hole for the hygrometer goes all the way through the pod. This version holds desiccant in the Dry Pod, but it can generate a more accurate reading because it will be measuring the overall AMS humidity, rather than the humidity of the desiccant in the Dry Pod with the hygrometer, i.e., the readout is less likely to be be distorted by the silica close to the reader.&nbsp;Just drag your preferred option onto the build plate.  The Round Hygrometer can be found here: <a target="_blank" href="https://www.amazon.ca/Hygrometer-Thermometer-Humidifiers-Dehumidifiers-Greenhouse/dp/B07BLQMR97" rel="nofollow noopener">https://www.amazon.ca/Hygrometer-Thermometer-Humidifiers-Dehumidifiers-Greenhouse/dp/B07BLQMR97</a>&nbsp;The Desiccant Containers can be loaded with generic desiccant and dropped into the slots in the back of the AMS. The top of the Desiccant Containers is split into two parts. The lower part should be glued on, and the upper snapped in after desiccant is added. They are easy to remove and replace the desiccant in.&nbsp;I used this desiccant: <a target="_blank" href="https://www.amazon.com/gp/product/B07QRRHJV3" rel="nofollow noopener">https://www.amazon.com/gp/product/B07QRRHJV3</a>&nbsp;To refresh the desiccant; pour it into a glass tray, place in the microwave for 2 minutes. Let it cool, then pour it back into the Dry Boxes. DO NOT put the Dry Boxes in the microwave! The desiccant gets VERY hot and will melt the Dry Boxes.&nbsp;Note that the Dry Pods will also work with the Hydra spool tray.Or if you are using the factory Bambu AMS spool tray then after inserting the Desiccant Containers, the original AMS dessicant covers can be snapped on top of them.&nbsp;With fresh desiccant, the humidity was down to 10% after a couple of hours, and it has stayed there for over 2 months now.&nbsp;24/4/7Added Pod for round hygrometers with vertical tabs.&nbsp;24/06/13V3.3 version adds an extension to the Funnel that allows it to cover Wide Dry Pods so desiccant is not lost when filling them. The same Funnel works also with Narrow Dry Pods.&nbsp;

AMS Dry Pods Wide, Narrow, Hygro, Trays, & Funnel

P1S Upgrades

Zwamdurkel

This is a center finder I developed. It can find the center of materials up to 140mm wide. There is also a remix for materials up to 75mm.<figure class="image image_resized" style="width: 69.97%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446977/design/2024-04-30_f851ca292feed.png"><figcaption>75mm version: <a target="_blank" href="https://makerworld.com/en/models/448112" rel="nofollow noopener">https://makerworld.com/en/models/448112</a></figcaption></figure>&nbsp;The key feature of this center finder is the ruler that allows you to quickly measure the width of your material in increments of 5mm.&nbsp;“Arachne” wall generator recommended. Tweak Parameters and see what works:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446977/design/2024-04-30_ffa9d1ced930a.png"><figcaption>Arachne Walls, 50 Wall transitioning threshold angle, 60 Minimum wall width</figcaption></figure>&nbsp;I have provided a multi color version and also a single color version. The single color version uses recessed markings.Please note that I have included .3mf files, but I have not yet printed them because I do not own a BambuLab printer yet.&nbsp;Note that if you use the MultiColor.stl, you should split the part and color it yourself:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446977/design/2024-04-29_07ce625cf786a.png"></figure>Everything except the last part is the markings.&nbsp;I hope you enjoy! Please let me know if there are issues with this print.&nbsp;New Model: Temperature Sensor Holder<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446977/design/2024-06-25_10179e537ad9c.png"><figcaption><a target="_blank" href="https://makerworld.com/en/models/511433" rel="nofollow noopener">https://makerworld.com/en/models/511433</a></figcaption></figure>

Center Finder with Built-In Width Ruler 140mm

Tools

ippe__

Use at least 3 walls to get proper strength. You need support no matter what stance you print this. Tape does not give much weight to this holder, so you might want to print this vertically to minimize filament needed for supports.

Tape Holder for Honeycomb-wall

Honeycomb Wall Holders

Hiro Koiso Racing

This model is designed to fit X1 and P1 series printers. HKR poop chute features interlocking leg to secure the chute to the printer body without extra hardware or magnets. ※Fitment Note: If you got X1, X1C and P1P in Feb 2023 and earlier (most likely built in 2022) , Your printer might have shorter legs than current version.  This can cause a printer to not sit level with the chute installed. How to tell if you have a early style short leg printer<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_177ad051bd84f.jpg"><figcaption>Print The chute and see if the round part of base can slid under the printer as pictured. If it goes like picture above, you have current style. no further action is required. If the chute base doesn&#39;t goes in, follow instructions. Scroll down for further information</figcaption></figure>  <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_0f1d75fb4cc6e.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_8219b55930c54.gif"><figcaption>Easy printing - It prints without support.</figcaption></figure>Removable bucket are easily access from front and available in 4 sizes.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_52e2e363fc345.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_ec5da20ffb566.gif"></figure> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_7002ac682aaca.jpg"><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, please consider boosting it to support creator. 
Thank you!</boostcontent></boostme> 《Solutions for early short leg printers clearance issue 》 2 ways for fix - both methods raise the printer height to same as current version to correct clearance issue. So print whichever you prefer and install to an early style printer. (Files are available for download)<ol><li>Replacement TPU leg - Extended legs replace stock rubber feet. Print with TPU <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_ab7611200d584.jpg"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_5d39951f13735.gif">  </li><li>PLA spacers - PLA or whatever rigid filament material you used to print the chute would work. They fit inside the leg pockets, use with stock Rubber feet <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_ac0d4c15d6753.jpg"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_e325c22380ea.gif">  </li></ol>Tip for leg replacement:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_828fd7817fbe4.jpg"><figcaption>Bring a leg to the edge one by one to replace. So you don&#39;t have to lay printer on side.</figcaption></figure>&nbsp;&nbsp;Checkout more HKR printer accessories: <a target="_blank" href="https://makerworld.com/en/u/2567436854" rel="nofollow noopener">https://makerworld.com/en/u/2567436854</a>&nbsp;・HKR Stackable Build Plate Storage: <a target="_blank" href="https://makerworld.com/en/models/120963#profileId-130105" rel="nofollow noopener">https://makerworld.com/en/models/120963#profileId-130105</a><a target="_blank" href="https://makerworld.com/en/models/120963#profileId-130105" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_1f77d220d2196.jpg"></a>&nbsp;・Foldable AMS side mount spool holder - No Bearing: <a target="_blank" href="https://makerworld.com/en/models/145321#profileId-158083" rel="nofollow noopener">https://makerworld.com/en/models/145321#profileId-158083</a> <a target="_blank" href="https://makerworld.com/en/models/145321#profileId-158083" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_119fd552797b3.jpg"></a>&nbsp;・Foldable AMS side mount spool holder - with Bearings: <a target="_blank" href="https://makerworld.com/en/models/153090#profileId-167255" rel="nofollow noopener">https://makerworld.com/en/models/153090#profileId-167255</a><a target="_blank" href="https://makerworld.com/en/models/153090#profileId-167255" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_25f94a5385d15.jpg"></a>&nbsp;Happy printing!

HKR Interlocking Poop chute with removable bucket

Completed prints

squinn

A standard and dual screwgate locking carabiner, using a print-in-place pivot mechanism, and available in multiple sizes.&nbsp;The STLs for three different sizes of each style are included here for convenient printing. This model is fully parametric though, and so the Fusion360 files are included for those that would like to generate different sizes or refine the model further.

Single & Dual Locking Carabiner (Parametric)

Small gifts

Neebick

Master Sword pen that is designed to use Pilot G2 ink refills (Gold and silver inks are available for extra fun). I designed the hilt for multiple color printing but looks very nice in all silver as well.<h3>Printing</h3>The model prints great with a 0.4mm nozzle. All pictures are printed with it at 0.08mm layer height. A 0.2mm nozzle will look better with finer details like the Triforce on the blade but is optional.&nbsp;Print at lower layer heights for better detail and smoother feel while handling.&nbsp;Supports are necessary for the hilt at the section that the blade inserts into. Supports also helps with the blade top since it is very narrow on the plate and could jostle loose. The screw must be printed vertically for best detail and function.&nbsp;I printed the blade in Bambu Labs Basic PLA Silver. This filament gave a very smooth and satisfying to touch finish without paint. I had to print on separate plates to achieve it since unsightly bulges appeared when the nozzle moved between parts to often. This is most likely due to the tall and skinny profile of the parts.<h3>Assembly</h3>The hilt prints in two halves for better detail and less filament waste on purges. Remove supports and glue halves together. Alignment is important for appearance and part fitment.<figure class="image image_resized" style="width:32.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_8fcaf10bf4d81.png"></figure>&nbsp;The blade top inserts into the hilt. Friction fitting will hold but glue can be used for a more permanent assembly.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_43c74889e437e8.png"></figure>&nbsp;Slide Pilot G2 refill cartridge into blade body. It will not go all the way in. The fitment is purposely tight for better feel while using as a pen.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_944e3f5ee510a8.png"></figure>&nbsp;Slowly screw in the blade top into the blade body. You will feel a slight resistance as the screw pushing against the ink cartridge. Continue till the parts align flush. DO NOT over tighten to avoid damage to the threads. There is a slight over tightening allowance but you will not be able to get an additional turn without damaging the parts.<figure class="image image_resized" style="width:31.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_80381d0adb3148.png"></figure>&nbsp;To remove the ink cartridge, unscrew the top and press the tip against a piece paper. There should be a slight pop as the the pen tip aligns with the blade tip. The cartridge should just shake out now.