V4 of the PTFE tube clip released! Keep the PTFE tube off the top glass on your P2S or X2D. Now designed with tighter tolerances and improved bending resistance.

Just published — a low-turbulence fan-to-duct adapter. A 120 mm fan is wider than 100 mm duct, so it has to neck down. Most reducers use a straight cone with a hard shoulder the air trips over; this one curves smoothly between both ends, so the flow stays attached — quieter, less lost pressure. Both ends are parametric: hit Customize and set it to your own fan + duct in the browser. What pair are you running? #functionalprint #ventilation #parametric

A fully customizable bedside holder for books, tablets, laptops, and everyday essentials. The hook depth, height, width, and spacing can be adjusted to fit different bed frames and different items. The design uses two hooks connected by replaceable horizontal pieces with M3 bolts and threaded inserts, so the holder can be resized with quick reprints while saving filament. A practical parametric home decor accessory for keeping your bedside clean and usable. #Contests #Hostedbycreator #parametrichomedecor

You can print a 33.5 cm Kallax shelf in one piece?!? The main shelf prints as one continuous part for strength and clean looks, while the parameterized brackets let users adjust the fit, support style, and retention method to suit their setup. Designed as a practical home decor upgrade: simple, useful, customizable, and easy to adapt for different storage needs. #Contests #Hostedbycreator #parametrichomedecor(Edited)