myryobitools

<h2>Bic Lighter and Cigarette or Joint Case</h2> Introducing the BlazeGuard: the ultimate solution for discreetly storing your essentials with an added touch of satisfaction, now your ideal companion gadget for every picnic, barbecue, or tracking and camping activities. Inspired by the popular JointLocker, the BlazeGuard emerged from a desire to bring a similar functionality to enthusiasts within Europe who faced difficulty in accessing the original design (<a target="_blank" href="https://anotherroom.io/collections/jointlockers" rel="nofollow noopener">https://anotherroom.io/collections/jointlockers</a>). Fueled by a passion for innovation and a commitment to accessibility, BlazeGuard is offered freely to the community, embodying the spirit of DIY creativity and resourcefulness.&nbsp;This sleek and compact case is designed to securely hold both a Bic lighter and your preferred smoke, whether it&#39;s a joint or a cigarette. Crafted with convenience and discretion in mind, the BlazeGuard ensures that your smoking accessories are neatly organized and easily accessible whenever you need them. Whether it&#39;s to fire up a barbecue, light up a candle on an evening candlelight picnic, ignite a campfire during a night under the stars, or even to illuminate your path during a late-night hike, the BlazeGuard ensures you&#39;re prepared for every moment, adding convenience and flair to your outdoor adventures.&nbsp;Its durable construction provides reliable protection for your items, while its stylish design makes it a must-have accessory for any smoking enthusiast.But that&#39;s not all – the BlazeGuard boasts a unique feature that adds to the experience. As you retrieve your Bic lighter from the case, it produces a satisfying pop sound, enhancing the ritual of lighting up. Say goodbye to fumbling around for your supplies and hello to effortless enjoyment with the BlazeGuard by your side.&nbsp;<h3>Print Instructions:</h3><ul><li>Print at a layer height of 0.2mm</li><li>Consider using a brim if you encounter any bed adhesion issues during printing</li></ul>&nbsp;Get ready to elevate your outdoor experiences with the BlazeGuard – the perfect blend of functionality and style for your smoking essentials.&nbsp;<h2>Please also check out my other models</h2><figure class="image"><a href="https://makerworld.com/en/models/424972" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/846720/2024-04-10_61fb6bc431369.jpg"></a></figure><figure class="image"><a href="https://makerworld.com/en/models/404170" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/846720/2024-03-30_0ed2cedb3c84f.jpg"></a></figure><figure class="image"><a href="https://makerworld.com/en/models/413806" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/846720/2024-04-04_5cd53bc6e5f6d.jpg"></a></figure>

Bic Lighter and Cigarette or Joint Case

jointed 

mclanesmemories

Seascape focused around a Chill'n Sea Turtle with his shades - Set of 3 Bookmarks&nbsp;Please share your prints&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #7 (0.64 mm) swap Dark Blue At layer #10 (0.88 mm) swap to Light Blue At layer #17 (1.44 mm) swap to white

Seascape focused around a Chill'n Sea Turtle with his shades - Set of 3 Bookmarks

turtle 

WagZPrintZ

Hopper fed speed loader for 223/556/300 blackout. &nbsp;you'll need some inserts and screws and a spring to complete it all. You can also use a metal genuine mag catch if you prefer. ive made tons of these to hand out to local enthusiasts and they love love love them! You can find the info and whatnot on my printables page once youve downloaded and printed from here via the 3mf. &nbsp;No supports needed.&nbsp;&nbsp; <a target="_blank" href="https://www.printables.com/model/385416-hopper-fed-speed-loader-223556300" rel="nofollow noopener">https://www.printables.com/model/385416-hopper-fed-speed-loader-223556300</a>

Hopper Fed Speed Loader 223/556/300

3DP RNS

★ New Robot Unveiled!&nbsp;[3DP RNS] Spi V1.0 (3D Printed Robot)<ul><li>Series : 6 Legs / 6-Legged Spider Type [<a target="_blank" href="https://youtube.com/shorts/I7V7X6KWw58?feature=share" rel="nofollow noopener">Youtube Video</a>]</li><li>This Is an all at once print. Assembly not required :)</li><li>If you subscribe to the YouTube channel [<a target="_blank" href="https://bit.ly/2KC3Tdx" rel="nofollow noopener">3DP RNS</a>], ★ a new robot will be revealed.</li><li>Thank you for your subscribing! It means a lot to me :)</li><li>Commercial License [<a target="_blank" href="https://www.patreon.com/3DPRNS" rel="nofollow noopener">Patreon</a>]</li></ul>&nbsp;※ Notice For my uploaded robot model to enable all joints to move, it&#39;s advisable to use a Brim.  If removing Brim is inconvenient or challenging, I don&#39;t recommend printing it.  Also, joint functionality may vary depending on the printer and filament you use. I hope your print is successful and you can have a robot with well-functioning joints.<figure class="media"><oembed url="https://www.youtube.com/shorts/I7V7X6KWw58"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Venom Weaver V1.0 (3D Printed Robot)<ul><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-venom-v1-102280396?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_creator&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Venom Weaver V1.0 Download [Patreon]</a></li><li>Venom Weaver V1.0 can be obtained through Patreon (Hero) membership.</li><li>Venom Weaver is a spider-like robot with eight legs that moves quickly. It can emit venom or explode to spread poison. It&#39;s dangerous, so avoid it if you encounter one.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/MX6lzRMSDXo"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Crawler V1.0 (3D Printed Robot)<ul><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-crawler-104482987?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_creator&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Crawler V1.0 Download [Patreon]</a></li><li>Crawler V1.0 can be obtained through Patreon (Hero) membership.</li><li>It is a hexapod robot with long legs, allowing it to move quickly. High-performance sensors are installed on its legs and body, providing excellent detection capabilities.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/nqp_DcHcsJk"></oembed></figure>

[3DP RNS] Spi_V1.0

too awesome 

The Big Greek

I would like to introduce you to my remix phone holder from <a target="_blank" href="https://makerworld.com/de/u/1285112604" rel="nofollow noopener">Reckit</a>. His design is fantastic, please read the text.&nbsp;After I talked to <a target="_blank" href="https://makerworld.com/de/u/1285112604" rel="nofollow noopener">Reckit</a> and asked if I could make a remix of his phone stand and he said yes, I am now making it available.&nbsp;One version has a slightly steeper angle, which is better for me to look at the phone.&nbsp;The other version has 2 different angles, so you can choose which one fits better.&nbsp;I have deliberately kept to the excellent design out of respect for <a target="_blank" href="https://makerworld.com/de/u/1285112604" rel="nofollow noopener">Reckit</a>, as this is simply timeless.&nbsp;Also the settings of the printing profile are the same as <a target="_blank" href="https://makerworld.com/de/u/1285112604" rel="nofollow noopener">Reckit</a>, so they work as they should.&nbsp;The following text is also from him, as I believe it is a tribute to his work.&nbsp;Thank you <a target="_blank" href="https://makerworld.com/de/u/1285112604" rel="nofollow noopener">Reckit</a> for your trust.&nbsp;&nbsp;Copied text from Reckit original&nbsp;The stand is designed to hold the phone with or without a case. Accents on the side are printed separately and fitted in after being printed&nbsp;No AMS is needed for dual-color print.&nbsp;Accents are a tight fit so position them into place and push down on a hard flat surface for a flush fit.&nbsp;Inspired by @libb_s - you should check out some of their models&nbsp;If you like my work/project consider supporting me with these options:<ul><li>leave a like</li><li>leave a comment</li><li>download the file</li><li><a target="_blank" href="https://www.buymeacoffee.com/thebiggreek" rel="nofollow noopener">or By me a Coffee</a></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464548/2024-01-10_7559cb7272b27.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464548/2024-01-10_d38d5a05f7a55.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/464548/2024-01-10_6ff3701842bef.jpg"></figure>

Larger Angle - Phone Stand (No AMS needed)

let's try this one 

JamesThePrinter

These conversation hearts have been blown up and turned into large gift boxes! Five designs are available:<ul><li>Be Mine</li><li>Hug Me</li><li>Kiss Me</li><li>Cutie Pie</li><li>Blank - Create your own message!</li></ul>All boxes require a multi-color capable printer. Approximate size: 200x200x60mm&nbsp;Print SettingsI used an extra top layer to prevent infill from showing through.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Crimson Red PLA</li><li>Bambu Lab Matte Ice Blue PLA</li><li>Bambu Lab Matte Sakura Pink PLA</li><li>Bambu Lab Matte Lilac Purple PLA</li><li>Bambu Lab Glow Green PLA</li></ul>

Conversation Heart Gift Boxes

Valentines 

extrawitz

screwable base for 20x20 aluminum profiles. Very tight with only 0.1mm tolerance on all edges. So exact print results or alternatively good old force is needed.&nbsp;<h4>More 20x20 stuff</h4>As I do a lot with 20x20 profiles, you may be also like some of my other 20x20 projects. Find them here: <a href="https://www.printables.com/de/@extrawitz_1031389/collections/843219" rel="nofollow">https://www.printables.com/de/@extrawitz_1031389/collections/843219</a>

screwable base for 20x20 aluminum profiles

aluminum Extrusion

Diggle

Needed some brackets for a project that I'm working on using 2020 extrusion. Hope these are handy for others.&nbsp;M4x8mm BoltsM4 2020 T-nuts

2020 Extrusion Brackets

spool winder 

garrett1966

Wall mounted bracket for Ryobi 40V batteries. &nbsp;I didn't like how all the other mounts out there were designed for horizontal mounting, so the batteries would mount vertically on the wall unless you put the mount under a shelf or bench. So I designed my own. They have been working great for me, allowing me to easily store my batteries securely and make them easy to get to also.&nbsp;You can print with supports (I'd suggest tree) if you want the “latch” piece to be perfect, otherwise it will print and work fine without any supports. The overhang for the battery latch will not look perfect but in my experience printing a bunch of them, they look good enough for me and they still work perfectly.

Ryobi 40V battery wall mount bracket

tools

Dragon and the Moon Carvings in Black and White - Set of 3 Bookmarks&nbsp;Please share your prints&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #3 (0.32 mm) swap to Dark Grey At layer #5 (0.48 mm) swap to Light Grey At layer #10 (0.88 mm) swap to white

Dragon and the Moon Carvings in Black and White - Set of 3 Bookmarks

wall art

k2thestank

Easy to print and fun to have!Features a slide and lock in Design to hold the Docking station tighter and prevents it from sliding or popping out as easy!<ul><li>You can split the STL's into parts for easier coloring as well if your not using the 3mf file as i have pre-split them in Fusion</li></ul>&nbsp;Stores 12 Game Cartridgestakes approx. 180gramsMaterials: - Crazy GluePrint Settings: - Walls: 3 - Top/Bottom Layers: 4 - Infill: 10% Gyroid Revisions: - Increased size of block for extra game slots and to improve its look- Fixed missing pieces and corrected files that didnt export correctly

Mario Switch Dock - Original System

Jessica stuff 

Micro Center- Inland Filament

Self-Loading Lego Dice Tower&nbsp;Inland Filament Used: <ul><li><a target="_blank" href="https://www.microcenter.com/product/486259/inland-175mm-pla-3d-printer-filament-1kg-(22-lbs)-cardboard-spool-silver" rel="nofollow noopener">Silver PLA</a></li><li><a target="_blank" href="https://www.amazon.com/dp/B014V0L7QA?ref=myi_title_dp&th=1" rel="nofollow noopener">Silver PLA on Amazon</a></li></ul>Printer Settings:<ul><li>Print Time: 20h 22m</li><li>Needed: 8 M3x12 and 1 M3x20 screws</li><li>No Supports</li><li>All parts should be loose, screws should be finger-tight</li></ul>STL designed by <a target="_blank" href="https://www.instagram.com/dsk001_3d/" rel="nofollow noopener">dsk001_3d</a>

Self-Loading Lego Dice Tower

davidkelly021

hello this is my print in place fire dragon, no supports needed you can use a brim

fire dragon print in place

dragon

zuperbuuworks

These masks were designed for you to paint and customise! Print them in matte filament for best painting results, colouring this way will blend better with any other features you put on the mask. For example; you could stick paper leaves or string vine designs down the antlers, sculpt ivy around the face with air-dry clay, or dab on some fake moss to the antlers to give it that “old woodland” look. It's your mask, make it look how you want it to!&nbsp;With the Year of the Dragon (wood element) around the corner, I decided to make masks to celebrate. Fae are spirits in my country, usually found in forests with large pointed ears, so I mashed them together with a Dragon to create these masks.Rather than uploading each elemental dragon mask separately, I am bundling them into this one profile. You can choose a Wood Fae (antlers) and a Water Fae (horns).&nbsp;Wearing the maskHoles for threading straps are found on the sides, below the ears. If you don't want to use these large holes, simply delete the “negative part” in Bambu Studio. A set of concealed holes can be found on the back of the ear base, where you'd find the default holes; these holes were added just in case you want to thread more straps for a better fit, or if you did not want visible holes on the mask exterior. They do, however, only take 1 to 1.5mm cords whilst the large holes can fit up to around 10mm thick cords. The thicker the cord/strap, the better. The mask was sculpted over a standard styrofoam mannequin head model (<a target="_blank" href="https://cults3d.com/en/3d-model/art/mannequin-head-full-size" rel="nofollow noopener">Find it here</a><a target="_blank" href="https://cults3d.com/en/3d-model/art/mannequin-head-full-size)." rel="nofollow noopener">).</a> This size fits all four of my family members, but the ears can make it a bit tight on those with a wide front temple. This mask fits children or smaller people best.&nbsp;Print Set-upAssembly is required. Due to the size of the masks, they are split into 3 sections: face, ear/horn left, and ear/horn right. They are attached via plugs. If the plugs do not fit, I recommend sanding them and trying them again. I would also advise you to glue them together to ensure they don't come off.Supports are required to print these masks; without them, the mask will not print well, if at all.<ol><li>Turn supports ON.</li><li>Set the type to “normal - Auto”.</li><li>Set the style to “Snug”.</li><li>The threshold angle should be unchanged (the default is 30).</li><li>Tick the “on build plate only” box.</li><li>If you don't want to use the narrow supports for the muzzle, simply use “normal - manual” type and paint a larger area on the muzzle like the below picture (the default supports haven't broken for me, but every printer is different)</li></ol><figure class="image image_resized" style="width:95.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/266883/2023-12-07_e600d2b7eff9f.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/266883/2023-12-07_b966905c3dfe3.png"></figure><figure class="image image_resized" style="width:95.69%;"><img src="https://makerworld.bblmw.com/makerworld/draft/266883/2023-12-08_05311306b433a.jpg"></figure>Using a brim is optional, but is highly recommended, as the mask profile is narrow it is at risk of coming off the hotbed without the brim. The horns/ears should not need a brim at all, but it's safe to still use them.&nbsp;This file is for PERSONAL use. To sell prints of the masks, you must subscribe to my Patreon: https://www.patreon.com/thomastedwards

Year of the Dragon Masquerade Mask

masks 

Staprin3D

I have also designed a version of my filament clamp where you can insert a small label with the material on it. I designed it in two parts which are then plugged together. The parts can be printed without support and only 1 filament change is necessary for the platesThe parts are best printed in PETG

Filament Clamp with Label

spool stuff 

Urban 3D

12/9/2023 - updated to provide a better chute to prevent material from becoming stuck&nbsp;This is a highly revised version of my previous pull tray purge bucket. Ths model requires NO supports. After some user review, this model features a steeper angle on the chute, as well as a drastic reduction in material required to print! It also features slots for two 3x9 magnets to secure it to the back of the printer!

UPDATED Bambu Pull Tray Purge Bucket

TheBear

&nbsp;Every party needs a little bit of noise - and especially New Year's Eve!&nbsp;Most of all already know the Party Horns you can buy at different stores around New Year's. But it has never been possible to 3D-print one at home - until now!Introducing the World's First 3D-Printable Functional Party Horn!&nbsp;After nearly 60 iterations and tests, I have finally succeeded with creating a Party Horn that actually produces sound which mimicks that of the store-bought ones, while also remaining easy to print!This means that no supports are needed, as I have carefully designed the interior to avoid briding as much as possible. The mouthpiece itself is print-in-place and ready-to-go!&nbsp;<h2>Assembly (10 seconds)</h2>While the mouthpiece itself doesn't require any assembly, you might need to free the vibrating pin, by sliding your finger across the top, if your retraction settings aren't 100% spot-on and a little bit of stringing has occured.Like so:<img src="https://makerworld.bblmw.com/makerworld/draft/320783/2023-12-07_a4ef5d282e6f3.gif">&nbsp;&nbsp;The cone is assembled by inserting the pins/pegs into the holes. Afterwards, you simply drop the mouthpiece down into the cone, line up the pegs with the holes, and pull it a bit, until the pegs pop out and the mouthpiece is secured.Like so: <img src="https://makerworld.bblmw.com/makerworld/draft/320783/2023-12-07_2321f35197db9.gif">Now you simply have to blow into the mouthpiece, and sound comes out - just like a regular party horn! If sound doesn't come out, or if it sounds a bit “wrong”, you can try holding the pin back for a few seconds to very slightly “bend” it a bit. &nbsp;<h2>Print settings / Tips&Tricks</h2>If you're not using a Bambu Lab printer, or if you decide not to use my Print Profiles, here are a few things, you need to know:<ul><li>A brim is highly recommended for the mouthpiece, as it is quite slim.</li><li>Use 0.4mm wall thickness (This is to ensure the pin is the right thickness).</li><li>For the “Cone, with Strands”, please use 3 walls at least - otherwise the first layer might not be quite right.</li><li>I highly recommend using Archimedean Chords as the Top Surface for the cones - this increases their strength significantly when bending, as no lines are 100% parallel to the bend.</li><li>Ensure your retraction settings are on-point! The pin is printed right in the middle, and it is absolutely crucial that it moves - otherwise no sound is generated when blowing into the horn!</li></ul>I have only tested the mouthpiece in PLA and PLA+.The cone has been tested in PLA, PLA+ and Silk PLA.&nbsp;&nbsp;&nbsp;&nbsp;And just for fun, a picture of the iterations and tests I went through (in no particular order):<img src="https://makerworld.bblmw.com/makerworld/draft/320783/2023-12-07_9ba113385634f.jpg">&nbsp;&nbsp;Remixing is currently not allowed, as I have quite a few designs for the cones, which I will be uploading gradually.I do allow you to add your own text on the cone in the slicer - you just cannot upload it as a remix currently.&nbsp;&nbsp;

Party Horns - Fully Printable! (New Year)

funny 

laisch

This flying Bat prints with 0.2mm layerheight and 100% Infill.The 100% infill is needed to make sure the center of gravity is in the right spot.After the print you have to fold the wings like in the pictures. You can use a lighter to make the bending. Since this is a single whing design, you have to play with the foldings until the bat is flying stable. The outer Wingtip (blue foldline) has to be bent down a little bit to increase its angle of attack.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231638/2023-11-28_ux6741n87cmm.jpg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/231638/2023-11-28_u8y4spjnfnmy.jpg"></figure>&nbsp;Don't throw it, instead let it glide out of your hands then it flys best.&nbsp;&nbsp;<figure class="table" style="width:93.72%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><thead><tr><th colspan="3">If you like this model you may have a look at my other flying toys too</th></tr></thead><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/78262" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/231638/2023-12-03_2302786e89dde8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/78262" rel="nofollow noopener">Micro Sailplane</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/81500" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/231638/2023-12-03_bc748d83c35e18.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/81500" rel="nofollow noopener">Geared Propeller Launcher</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/21091" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/231638/2023-12-03_a8fc21a53267c8.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/21091" rel="nofollow noopener">Cross Bow</a></td></tr></tbody></table></figure>

Flying Bat

Halloween 

dangles_

Pop/Soda Can dispenser for use inside or outside your fridge. Holds 11 standard US sized cans and automatically pushes the next can to the front. Willing to make adjustments for other sized cans, just comment what you want and I'll make it happen. &nbsp;Dimensions: 420mm x 130mm x 162mm (LWH) 16.5in x 5.12in x 6.38in (LWH)

Pop Can Dispenser 

big printer

Amao Chan

This is an African elephant with 22 movable joints. The joint design of this elephant is different from the common chain-like design. These joints can be adjusted and fixed at different angles, allowing the elephant's trunk to be lifted and posed in various preferred positions. The tightness of the joints depends on the hardness of the materials used for printing. Using harder materials will result in tighter joints.&nbsp;The reason it is named "Blank" is to encourage the printer to add color to the elephant's body. For those with multi-color 3D printers, they can try printing each segment in different colors.&nbsp;When printing, please start by printing the tail. If the tail can rotate properly, then use the same printing settings to print the other parts. If the tail gets stuck and cannot rotate, please reduce the material flow to continue printing.&nbsp;3D printing settings Layer height - 0.2mm Infill Density - 12% No supports. <a target="_blank" href="https://www.facebook.com/amaochanstudio/" rel="nofollow noopener">https://www.facebook.com/amaochanstudio/</a> <a target="_blank" href="https://amaochan.work/" rel="nofollow noopener">https://amaochan.work/</a>&nbsp;多關節素坯非洲象這是一隻有22個可轉動關節的非洲象這隻非洲象的關節設計與常見的鍊條式的設計不同，這種關節可以調整角度後固定，因此這隻大象的鼻子可以抬起並且擺出自己喜歡的姿態。大象的關節結緊迫程度與使用的材料硬度有關，使用愈硬的材料列印則關節的緊度愈緊。之所以取名為(白胚)的原因，就是鼓勵列印者能幫大象的身體上顏色，若有多色3D列印機的朋友就可以試著在每一段使用不一樣的色彩列印。&nbsp;列印建議 列印時請先列印尾巴，若尾巴能正常轉動，就以相同列印設定來列印其他部分。若尾巴卡住無法轉動，請減少材料流量來列印。 層高-0.2mm 免支撐 填充-12%

BLANK ELEPHANT

cool stuff

DGA3DP

Desk organizer with place for notes. Notes hole 90x90mm Material: PLA, PET-G, etc. Layer high: 0,3 or lower No support needed.

Desk organizer- Pen holder

Work shit

miniShev

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a target="_blank" href="https://www.patreon.com/minishev" rel="nofollow noopener">https://www.patreon.com/minishev</a>Patrons have access to all my files in one place, supported miniatures, a request board, as well as commercial options! Come check it out :-)

Crawling Dragon

needs altered

Romwba3D

A Cute Christmas Gnome / Gonk split for multi-colour printing, also split to enable printing with just one AMS or all in one with more than one AMS.&nbsp;i have also included a single colour STL file single colour or resin printing&nbsp;I have uploaded 3mf Print profiles for both the X1C/P1P and A1 Mini &nbsp;These are part of My Patreon <a target="_blank" href="https://www.patreon.com/romwba3d" rel="nofollow noopener">https://www.patreon.com/romwba3d</a>&nbsp;I have lots of Gnome / Gonks available on the patreon&nbsp;You can view all the Available Models - now over 220 Models on https://www.romwba3d.com

Christmas Gnome

gifts

chippwalters

Use my print profile for best results, I cannot guarantee print profiles by others.&nbsp;Here is a simple stand you can show off your 3D prints or picture frames, signs and HueForge prints. Simple to print and works with A1-mini and larger Bambu printers. STL files as well.&nbsp;The regular version prints in just under 3 hours and the wooden texture prints in just over 5 hours. The wooden looks great printed in matte filament. No supports, printed in PLA. If you have problems sticking to the bed, then use the one with the brim, but I typically print these without brim.

Frame stand both wood texture and plain

misc

ThreeD-Michael

I know there are a lot of nice bag clips here already, but I wasn't entirely happy with any of them, so I added another design. There are 6 sizes for clamping lengths of 55 mm, 65 mm, 75 mm, 90 mm, 120 mm and 150 mm.&nbsp;My design goals were:<ul><li>stability,</li><li>longevity,</li><li>high holding power,</li><li>easy operation,</li><li>no notoriously weak hinges,</li><li>easy printing,</li><li>and last but not least a pleasant appearance.</li></ul>How to use:As a rule, it is enough to bend the clip on the closure by a maximum of 1 cm in order to slide a bag between them or to remove a bag. It is not intended to bend the clip to larger angles. Bending too hard can cause the clip to break.To open a locked clip, please use one of the two methods shown here:<figure class="media"><div data-oembed-url="https://youtu.be/p4mRMj1A3TU"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/p4mRMj1A3TU" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Print settings:A flexible material must be used, such as PETG. I haven't even tried printing clips with PLA since I don't think they will work for long (PLA permanently deforms under tension).

Strong Bag Clips

maybe at some point 

Bean Eating Cookies

Sea animals cookie cutters and stamps They are cutters and stamp separate. Have a look at my profile for more cookie cutters and stamps! If you have a request don't hesitate to reach out! If you like what I am doing please consider buying me a coffee or tipping.<img src="https://cdn.buymeacoffee.com/buttons/bmc-new-btn-logo.svg?image_process=resize,w_800/format,webp?image_process=resize,w_800/format,webp"><a target="_blank" href="https://www.buymeacoffee.com/beaneatingcookies" rel="nofollow noopener">Buy me a coffee</a>

Sea Animals Cookie Cutters and stamps

clay. cutters

mcgybeer

Cute Mini Octopus, the original!It's designed so it can be printed at once. No assembly or supports required.Spare tentacle available as well, no need to discard failed prints!

Cute Mini Octopus

other articulated 

jayburd

A1 mini tool storage tray. Can be used standalone but is designed to fit in the A1 mini storage box <a target="_blank" href="https://makerworld.com/en/models/46925#profileId-48721" rel="nofollow noopener">https://makerworld.com/en/models/46925#profileId-48721</a>&nbsp;Accessories for the storage box:<ol><li>fitted nozzle box <a target="_blank" href="https://makerworld.com/en/models/51537#profileId-53261" rel="nofollow noopener">https://makerworld.com/en/models/51537#profileId-53261</a> (designed to sit at the bottom of the storage box)</li><li>tools tray <a target="_blank" href="https://makerworld.com/en/models/51541#profileId-53265" rel="nofollow noopener">https://makerworld.com/en/models/51541#profileId-53265</a> (designed to sit on top of the nozzle box)</li></ol>&nbsp;See my A1 <a target="_blank" href="https://makerworld.com/en/u/202702197/collections/53441" rel="nofollow noopener">Accessories Collection</a> and <a target="_blank" href="https://makerworld.com/en/u/202702197/collections/45991" rel="nofollow noopener">A1 Purge Basket Collection</a>.