my_fiero

V3 Precision

<p>This is a spool winder for transferring filament from one spool to another. Inspired by the need to use certain filament spools for the Bambu Lab AMS. This build should speed up the process and give a nice tight winding. There is room for improvement, so feel free to give some feedback either on Printables or on the Youtube videos.</p><p>This version is 100% 3D printed (not including the mounting screws). Future versions will use bearings and possibly a motor to drive the gears.</p><p>The images show the assemblies mounted to a 2x6 for testing. The assemblies can be mounted to a similar board or to a base made from aluminum extrusions.</p><p>&nbsp;</p><p><strong>Printing Recommendations</strong></p><p>I used PLA while developing the spool winder. I would recommend using PETG, or Nylon CF, or other stronger, stiffer filament.</p><p>The ‘worm’ gear can be tricky to print. In Bambu Lab Studio, I set the part upright and set support to tree (auto) and threshold angle at 10. Set a brim at 8mm.</p><p>The gears are easy to print and require no support or post processing.</p><p>The bases need some support and did well with tree (auto) and threshold angle of 30.</p><p>I used 4 walls and 15% infill on most pieces. The thumbscrews I used 100% infill.</p><p>&nbsp;</p><p><strong>Assembly</strong></p><p>Most of the assembly is easy and self-explanatory.</p><p>Note that the rear driven gear is reverse threaded.</p><p>Specific instructions can be found in an upcoming Instructions Video …….</p><p>There will also be a link to the video on the V3 Precision website.</p><p>&nbsp;</p><p>#best3dp2023</p><figure class="media"><div data-oembed-url="https://youtu.be/3llHdgb1ftQ?si=rh9tLXTMeOSzBDXe"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/3llHdgb1ftQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/ru2TtLahlmw?si=5opj3V5R-Ab6cPFX"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/ru2TtLahlmw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Filament Spool Winder

tools

Chickenbisket

<p>A large cryptex-style container for gifting wine/liquor/similarly shaped items. The combination is adjustable by changing the position of the notched inner number ring (keyed sleeve.stl) to align the notch with the desired code number (number sleeve.stl). The box is fully 3d printed. You will need to make 1 each of the inner cylinder/outer cylinder/lock nut, and 8 each of the keyed sleeves/number sleeves. To assemble you insert the keyed sleeve into the number sleeve and stack all the assembled sleeves onto the outer cylinder. The lock nut is then screwed on to retain all the rings. With the combination entered you can slide the inner cylinder into place and rotate the numbers to lock.</p><p>&nbsp;</p><p>To print the full box on a Bambu printer requires going into the machine settings in Bambu Studio and modifying some settings. I've also uploaded a slightly shortened box that will fit in the default printer settings. This brings the internal length down from 13in to 12.5 in which should be plenty for a wine bottle and most single malts.</p><p>&nbsp;</p><p>Here is a link to the wiki on how to enable the full print volume.<br>https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations</p>

Wine Bottle Cryptex

giuliolibrando

<p>------------------------------------------------------------------------------------------------------------------------------------------------------------------------</p><h2><span style="color:hsl(0, 75%, 60%);">I have released a “V2 version” </span></h2><p><span style="color:hsl(0, 0%, 0%);">Improvements:</span></p><ul><li><span style="color:hsl(0, 0%, 0%);">modular design</span></li><li>easy color swap</li><li>less pieces</li><li>more flexible</li></ul><h2>Try it here: <a target="_blank" href="https://makerworld.com/it/models/59357" rel="nofollow noopener">Bambu Lab Modular Multi Filament Spool</a></h2><p><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-11-07_7c6cea4bd5ebd.png"></p><p>------------------------------------------------------------------------------------------------------------------------------------------------------------------------</p><h2><span style="color:hsl(120,75%,60%);">Bambu Lab</span> Multi Filament Spool</h2><h3>Introduction</h3><p>A multi-filament drop-in replacement for the bambulab spool. </p><p>You'll be able to insert up to <strong>4 different filament </strong>in a single spool. Useful if you have samples or leftover on many spools.</p><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_5cb94fd2d43a2.png"></figure><p>&nbsp;</p><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_00f2280014302.png"></figure><p>&nbsp;</p><p><strong>It is also available a </strong><a target="_blank" href="https://makerworld.com/it/models/41799" rel="nofollow noopener"><strong>2 Filament Spool Version here</strong></a></p><figure class="image image_resized" style="width:86.72%;"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-15_b908133f8c4d1.png"></figure><h2> </h2><h2>IMPORTANT: If you have a <u>A1 Mini</u> you must use <a target="_blank" href="https://makerworld.com/it/models/57054" rel="nofollow noopener">THIS ONE</a> instead.</h2><h2>What you'll need:</h2><h3>Filament Clip</h3><p>To stop the filament from unwinding <strong>you'll need</strong> <a target="_blank" href="https://makerworld.com/it/models/41154" rel="nofollow noopener">this filament clip</a>:</p><figure class="image image_resized" style="width:56.3%;"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_1622cbf74ed12.png"></figure><h3> </h3><h3>AMS PTFE Feeder Cap</h3><p><strong>Optional but highly recommended</strong> to releaf the strain on the filament during spool movements</p><p>Suggested model:</p><ul><li><a target="_blank" href="https://www.printables.com/model/308399-bambu-ams-feeder-pfte-adapter-remix/files" rel="nofollow noopener">https://www.printables.com/model/308399-bambu-ams-feeder-pfte-adapter-remix/files</a></li></ul><p>The PFTE tube should be <strong>80mm </strong>in lenght </p><figure class="image image_resized" style="width:56.34%;"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-15_9c7e78a5c1369.jpg"></figure><p>&nbsp;</p><p>&nbsp;</p><h2>Assembly instructions</h2><ul><li>twist the bambulab spool to open it in half</li><li>align every spool disk as  shown in the illustration, taking care to align the internal channels</li><li>insert the dovetail stoppers (the 2 trapezoid pieces) inside the channels</li><li>put together the bambulab spool and twist it back in position the 2 halves</li></ul><p><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_821ae8bca303f.png"><br> </p><h3>Correct order:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_f5b9c59fdff91.png"></figure><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_1d9d3951ff83.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_840315b5910f3.jpg"></figure><h3><strong>N.B. Align all the holes as shown in the figure below</strong></h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/152555/2023-10-14_3f452851cd833.png"></figure><h3> </h3><h2>Filament insertion</h2><ul><li>Straighten up the end of the filament </li><li>Fold at 90 degree angle the last 2-3 mm using a plier.</li><li>Put the curved filament in the hole </li><li>Start winding it mantaining tension on the spool for the first couple of turns</li></ul><p>&nbsp;</p>

tools

fun

3D printer