muhammad.karimisaleh

mikeyriot171

I noticed a severe lack of Saitama love on here so I made this, the photos don't do it any justice, it's much better in person!&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA Kingroon Yellow Transmission Distance: 5 PLA Kingroon White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #18 (1.52mm) swap to White for the rest.

Saitama, One Punch Man - HueForge

StefanWox

Attention! There seem to be several versions of the AMS where the slots differ from this version. Please check before printing if the version fits. I try to get the dimensions of the other version and will then upload the bracket in the adapted version!I added a design drawing with measurements please check it! Here is the Variation for the 3 slotted AMS Version.&nbsp;Nothing special - just a quick Design to mount the AMS on the wall.Works fine for me. If there are any Problems, don't hesitate to contact me!Recommended print settings: 5 Walls/Perimeters, 5 Top/Bottom, 35% infill with ABSFor example <a target="_blank" href="https://www.nobufil.com/abs-filament" rel="nofollow noopener">https://www.nobufil.com/abs-filament</a> which is currently the best ABS i know! Perfect layer bonding, ok smell, great colors (even Sparkle ones) - and recycled out of industrial ABS. No, i'm not working there, just impressed.

Fun

Useful