mu5h3r

Tommy Gun

Print in place this is a really easy print&nbsp;Enjoy&nbsp;No support, no brim, no raft needed

Flexi Long Dragon Crystal tail print in place

Toys

depep1

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000455950/design/2024-05-16_12118d06db059.png"></figure>Stronger Joints for Larger Scaled Dummy13  models.  What did I change? I added a gap in each joint to allow for easier assembly and provide a longer-lasting grip. This is only for scaled-up versions of the Dummy13. The minimum Scale I recommend is 600% however I provided the f3d file so you can modify them if needed. They still require a lot of effort to assemble however I did not need to use any heat. All files are scaled to 100% to make sizing easy. Printed in pla, 4 walls, 10% infill. &nbsp;Looking for some Poseable hands? Check out this <a target="_blank" href="https://makerworld.com/en/models/455958#profileId-363698" rel="nofollow noopener">link!</a><figure class="image image_resized" style="width: 73.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000455950/design/2024-05-06_ce69dcc00257d.jpg"></figure> Looking for a companion for your dummy13? <a target="_blank" href="https://makerworld.com/en/models/461031#profileId-369700" rel="nofollow noopener">Check out this link!</a><figure class="image image_resized" style="width: 67.7%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000455950/design/2024-05-11_18e5dd119d407.jpg"></figure>

Dummy 13 Joints+

Dummy 13

Falets

This is yet another splitter / adapter for the Carbon/P1/PS with an AMS. It allows you to keep the AMS connected while using single spools. The part is light enough that the PTFE tubes hold it in place. The path favors the AMS to prevent jams, so some manually-inserted filaments may need a little more force to get through the adapter. I've been able to get everything from TPU to CPE-CF through with no issues.&nbsp;It's meant to work with <a target="_blank" href="https://www.amazon.com/BIQU-Straight-Pneumatic-Connector-Extruder/dp/B01IB81IHG/ref=sr_1_1?crid=26EXKP13CX3M1&dib=eyJ2IjoiMSJ9.AYFYlvL16_sjqwE4hK8olPExF0o5qmT4snAo9YlzqDzN8ZjD95RAPH5HwlI_RJAHV7P1s3jE8PbD_awLGPZ4TOQdqkMJHyJRhVoPZMSJ8fyPcLNt1ogKjv6Vo0frtqcDu79TQGDSQ0sfsvlVyE9906ZJYRp6IJYhGVMWVMsy8ZpGdEw5J6PtMYm2eT9jXdrEbqjffOfmJQ8pDXbuQ6iKxJPOJ-yey37Xm6WQMcKWmFzO_tKMZDkCx7e5d94WzCwZxrsfq-YQvxdjCIJm6pcjNuQTcmKa88M0AB-cg-ZB2mc.rlVj43akSBmDdNo8pzjIUQ3yPkRt7deg-HDVno4OgwE&dib_tag=se&keywords=m-10%2Bptfe%2Btube%2Bfitting%2Bconnector&qid=1708711452&s=industrial&sprefix=m-10%2Bptfe%2Btube%2Bfitting%2Bconnector%2Cindustrial%2C106&sr=1-1&th=1" rel="nofollow noopener">PC4-M10 PTFE tube fitting adapters</a>. The threads are part of the print and no further drilling or tapping is required. Just screw in the fittings, insert the tubes, and enjoy never having to disconnect the AMS to print non-compatible materials again.&nbsp;The 3MF includes two versions of the part. One should be printed with supports (auto trees work well). The other includes a 0.8mm layer at the shoulder of the single-side fitting that eliminates the need for supports and is meant to be punched through after the print.&nbsp;The 3MF was sliced using BambuStudio's adaptive slicing. In order to ensure the threads work well, slice at .12mm or thinner layers. The adaptive layer adjustment will maintain the details at the threads but will save time overall.&nbsp;I've been using this with no AMS jams for a few months, but your mileage may vary. Note that some of the pictures show an earlier version of the part. The geometry is the same, it just has a different label for the spool port.

Toys

Dummy 13

BBL X1C