msimcox2

Brent Peterson

<h2>Toroidal Launcher Mini Rings - 150mm pitch</h2><p>This is an add-on design for my <a target="_blank" href="https://makerworld.com/en/models/93385#profileId-99949" rel="nofollow noopener"><strong>Toroidal Launcher</strong></a><strong> </strong>and features four different ring designs along with a smaller 100mm outer diameter. The launcher bit is included and works with all of the mini rings variants, try them all!</p><ul><li><a target="_blank" href="https://makerworld.com/en/models/102279" rel="nofollow noopener">Toroidal Launcher Mini Rings - 100mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/97633" rel="nofollow noopener">Toroidal Launcher Mini Rings - 150mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/102728" rel="nofollow noopener">Toroidal Launcher Mini Rings - 200mm pitch</a>.</li></ul><h3>Specifications</h3><ul><li>Four different ring designs, two to five blades (1.2mm thick)</li><li>100mm outer diameter</li><li>150mm blade pitch</li></ul><h3>Printing Tips</h3><ul><li>The included print profile adjusts several of the standard settings and is what I&#39;ve found works the best for speed and quality.<ul><li>Arachne wall generator with 0.6mm line thickness to ensure all walls are 2 thick</li><li>Slower print settings for outer walls and infill areas where the blades merge</li></ul></li></ul>

Toroidal Launcher Mini Rings - 150mm pitch

Fun Things

Neebick

<p>This is my model of Inception Technologies Digipick from Starfield. This is a quick model since it is mostly a cylinder and a few buttons. The central cylinder is the main piece that everything slots into. I've included an exploded render to help.</p><p>I've purposely hollowed out the center in case people want to use it as storage. Just glue the important pieces to the locking cylinder to use it as a lid of sorts.</p><p>&nbsp;</p><p>I printed both the rubber grip portion and the lens ring in TPU for a soft squishy feel.</p><p>I've left the tick marks on the flanged bit but didn't include the numbers and text since I didn't think it would print well unless a resin printer is used. They are included in the step file.</p><p>&nbsp;</p><p>All parts have a 0.2mm tolerance.</p><p>&nbsp;</p><h3>Video Model Overview</h3><figure class="media"><div data-oembed-url="https://youtu.be/jYL03T1ZM_E"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/jYL03T1ZM_E" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Digipick from Starfield

Props

randki

<p>I purchased the Limited Edition Starfield Controller in anticipation of what will hopefully be the most amazing space game we've seen in a while, <a href="https://bethesda.net/game/starfield" rel="nofollow">Starfield</a>. </p><p>Printer: The 3MF file is designed for the Bambu X1 Carbon with AMS. <br>Layer Height: .12<br>Infill: 15%<br>Infill Pattern: Gyroid</p><p>This is the first thing like this I've ever done, so I am sure there are mistakes :). </p><p>Like this idea? <a href="https://www.printables.com/model/519952-controller-stand-badge-system" rel="nofollow">Check out my other remix</a> of his (and other) controller docks that enables you to select which badge you put on the front of your dock.</p><p>Also, Im a bit nuts about Starfield, so I've made a <a href="https://www.printables.com/model/526947-starfields-nova-galactic-ship-corporate-logo" rel="nofollow">couple</a> of other <a href="https://www.printables.com/model/529303-starfields-nova-galactic-full-sign" rel="nofollow">models</a>.</p>

XBox Controller - Starfield Controller Edition

Desk Accessories

freejstn

<p>Let's face it, gridfinity rocks, and so does IKEA. In my “gridfinity everything” phase that I'm going through, I made a custom baseplate that allows the base to fit into IKEA's Kuggis Box (<strong>105.140.42)</strong> - also<strong> </strong><a href="https://www.ikea.com/us/en/p/kuggis-box-with-lid-transparent-black-10514042/#content" rel="nofollow">here</a>.</p><h4><strong>To Assemble:</strong></h4><ul><li>Print 2x Small Dovetails</li><li>Print 2x Large Dovetails</li><li>Print each part of the baseplate</li></ul><h4><strong>Open Source Note:</strong></h4><p>In the spirit of open source, I have included my original fusion file. Please keep in mind I'm really new to this whole 3d thing and did my best. If you find any problems (which I'm sure you will), I'd love some feedback and tips. Remixes are certainly welcomed but make sure you give some sort of attribution. Thanks for downloading this model!</p><h4>Updates:</h4><pre><code>Update 01/03/2023Added one with solid base for easier gluing – pre cut into parts.Update 1/10/2023Added little dovetails into this assembly + F3d files.</code></pre>

Gridfinity for Ikea Kuggis Box

Gridfinity

acevalsl

<p>Box to put the printer nozzles of X1-P1P-P1S.</p><p>complete nozzles or only hotend</p>

Bambulab Hotend Box

Printer Accessories

CoolBeans

<p>This automata uses pinwheels and an isometric wheel to spin the UFO and vertically move the abducting cow. I have split the parts into 3 beds based on their colour. Most use the generic settings except the cow which must have a heavy infill to gain its required weight. The assembly video is attached below, happy constructing!</p><p>&nbsp;</p><p>While you're here, feel free to check out my latest upload - a marble run construction kit, a great toy for kids!</p><p>&nbsp;</p><figure class="media"><div data-oembed-url="https://youtu.be/Akm4svpsQZc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Akm4svpsQZc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

UFO Automata (Flying sauce abducting cow mechanical toy)

Automata

MaxTee

<p><a target="_blank" href="https://www.buymeacoffee.com/maxt" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/328354/rich_content/bf7410f2-4e3d-4409-b318-6bc4c2cb3f55/thumbs/cover/800x225/png/bmc-button.webp"></a></p><p><a target="_blank" href="https://www.buymeacoffee.com/maxt" rel="nofollow noopener">https://www.buymeacoffee.com/maxt</a></p><p>&nbsp;</p><p>----------------------</p><h4><strong>2 versions in one package:</strong></h4><ol><li>Without a recycle logo on the side</li><li>With a recycle logo on the side</li></ol><h4><br><strong>Why should you use this model and not the others?</strong></h4><ul><li>It won't break, ever (as long as you use it for the trash bag rolls)</li><li>The bag roll will never fall out through one of the sides</li><li>The bag roll is very easy to pick up</li><li>Enough extra spacing to fill a 60mm Ø bag roll without a problem, but you can resize the model as you please to fit bigger bag rolls</li><li>Can be used to accommodate any length of the bag rolls by simply spacing the left and right sides out as needed (I suggest adding an extra 0,5cm on each side of the bag roll)</li><li>Can be mounted using double-sided tape or screws</li><li>Because you've just spent a minute reading the reasons why to use this particular trash bag roll holder and not the others. If you're still here, we know you mean business - you need a solution that just works. This holder got you covered!</li></ul><p><br>The model will fit on Prusa Mini+ (180x180)<br>Feel free to size it up or down as you wish</p><p><br>Print: 0.2-0.3mm<br>Nozzle: 0.4mm<br>Perimeters: 3 (much more important vs infill percentage!) <br>Support: Not required<br>Brim: Not required<br>Infill: 15-30%<br>Fill pattern: Support Cubic<br><br><br>Happy Printing!</p>

Slightly Over Engineered Trash Bag Roll Holder

Useful Prints

emilia

<p><strong>Listed below are some changes that were made.</strong></p><ul><li>Switched to use M3x25mm screws, nuts, and optional washers.</li><li>Moved the Flipper Zero to the bottom of the case and moved the devboard compartment to the top.</li><li>Added Flipper Zero text &amp; logo to the top of the model.</li><li>Created a dual devboard holder.</li><li>Enlarged the compartment for storing various other boards.</li><li>Added a shim for the case. Allows for the Flipper to fit without needing a silicone case.<br> </li></ul><p><strong>Requirements:</strong></p><ul><li>4x M3x25mm screws (nuts &amp; washers are optional it will vary on your printer&#39;s tolerances)</li><li>¼ inch foam if you want to keep everything snug, although it is not required.</li></ul><p>&nbsp;</p><p><strong>This model was a remix of:</strong></p><ul><li><a target="_blank" href="https://www.printables.com/model/259524-flipper-zero-and-devboard-storage-case" rel="nofollow noopener">https://www.printables.com/model/259524-flipper-zero-and-devboard-storage-case</a> </li><li><a target="_blank" href="https://www.printables.com/model/204882-flipper-zero-case" rel="nofollow noopener">https://www.printables.com/model/204882-flipper-zero-case</a> <a target="_blank" href="https://www.printables.com/model/259524-flipper-zero-and-devboard-storage-case," rel="nofollow noopener"> </a></li><li><a target="_blank" href="https://www.printables.com/model/39729-tool-box-parametric" rel="nofollow noopener">https://www.printables.com/model/39729-tool-box-parametric</a> </li></ul><p>&nbsp;</p><p><strong>Revisions</strong></p><ul><li><strong>V1_1</strong> (Updated hinge file to fit the screws)</li><li><strong>V1_2</strong> (Added a shim to allow for the Flipper to fit if you don&#39;t have a silicone case)</li></ul><p><br><strong>Credits</strong><br><br><a target="_blank" href="https://www.printables.com/@Snail_1039542" rel="nofollow noopener"><strong>Lily _@_v</strong></a> for the redesign </p><p><a target="_blank" href="https://www.printables.com/@zardoz" rel="nofollow noopener"><strong>@Zardoz</strong></a> for file organization &amp; presliced .3mf files.</p><p><a target="_blank" href="https://www.printables.com/@uWu_CrackiiN_734199" rel="nofollow noopener"><strong>@zR_CrackiiN</strong></a><strong> </strong>for creating the spacing shim file.<br> </p><p>&nbsp;</p>

Ultimate Flipper Zero Case

FlipperZero

planetace

<p>This is a little addition for the <a href="https://www.printables.com/de/model/345083-rugged-multipart-pinecilts100ts80-case-v2" rel="nofollow">great rugged box</a> from <a href="https://www.printables.com/de/@PjotrStrog" rel="nofollow">@Pjotr</a><br> </p><p>it holds the <a href="https://cnckitchen.store/de/products/ts100-101-adapter-tips-set-m2-x-m3-m4-m5-m6-1-4-m8-100-lead-and-cadmium-free" rel="nofollow">TS100/101 Soldering Adapter + Tips Set</a> from <a href="https://www.printables.com/de/@CNCKitchen" rel="nofollow">@CNC Kitchen</a>  for the TS100/TS101/Pinecil </p><p>the dimensions of that “insert base” fitted to my print, probably you have to glue it down or scale a bit, depending to your printer/accuracy</p><p>for the insert-center you need some M5 Wormscrews, i used 20mm long screws</p><p>the thread in the center holds the worm screws, the tips can be easy screwed on/off</p><p>to get the parts out you can remove the complete insert and unscrew the one you need</p>

Insert for CNC Kitchens TS100/Pinecil Adapter

Workbench

Iconic FAB

<h2>ABOUT STEALTH PRESS</h2><p><strong>Stealth Press is a highly precise, mostly printed DIY heat set insert tool for generic, TS100/101, and Pinecil soldering irons.</strong><br><br>There are multiple projects like this available for free download and build. Most of them rely on Misumi standard 2020 or 4020 extrusions to provide precision which adds extra cost, time, and complexity to the build.</p><p>&nbsp;</p><p>Stealth Press build<strong> relies on precision provided by 300mm MGN12H linear rail</strong> instead which provides a stable spine to build every other component around it.</p><p>&nbsp;</p><p><strong>Integrated, printable build plate</strong> adds another critical element for precision and easiness to work with.</p><p>&nbsp;</p><p>Stealth press uses KEY-BAK key reel with kevlar belt loop to <strong>ensure longevity</strong> (proven to last more than 1 million pulls) and has some <strong>other quirks, features, and QoL improvements</strong> compared to similar projects.<br> </p><h2><strong>WHERE TO GET MECHANICAL PARTS OF THE BUILD?</strong></h2><h3><strong>Option 1 </strong>— Order ready-to-build kits <span style="color:#E14747;">(supported vendors)</span></h3><ul><li><a target="_blank" href="https://dfh.fm/collections/stealth-press?ref=iconic-fab" rel="nofollow noopener">Stealth Press KIT</a> — <strong>DFH.fm</strong></li><li><a target="_blank" href="https://kb-3d.com/store/tools-equipment/1002-pre-order-iconic-fab-stealth-press-kit-for-heat-set-inserts-1698787283366.html?affp=14933" rel="nofollow noopener">Stealth Press KIT (US)</a> — <strong>KBD3D.com</strong></li><li><a target="_blank" href="https://lecktor.com/en/stealthpress/1565-stealthpress-hardware-kit.html" rel="nofollow noopener">Stealth Press KIT (EU)</a> — <strong>Lecktor.com</strong></li></ul><p>Stealth Press is now available as a comprehensive mechanical parts KIT, streamlining the process of sourcing the necessary components. In many cases, purchasing the KIT proves to be a quicker and more convenient option than sourcing the parts individually. Availability and selection may vary depending on your location and existing inventory.<br><br><strong>Each listed KIT source offers a unique selection of parts, all adhering strictly to the BOM and carefully chosen to guarantee the highest quality build.</strong></p><p>&nbsp;</p><h3><strong>Option 2</strong> — Self-source using BOM (bill of materials)</h3><figure class="table" style="width:100%;"><table><thead><tr><th><strong>Mechanical parts</strong></th><th style="width:50px;"><strong>QTY</strong></th></tr></thead><tbody><tr><td>M3x8 SHCS — Bolts (Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DD5xFM1" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">40</td></tr><tr><td>M5x25 SCHS — Bolts (Sources: <a target="_blank" href="https://s.click.aliexpress.com/e/_Dne9xOV" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">2</td></tr><tr><td>F695-2RS — Bearings <i>(F = Flanged) </i>(Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DBulKpf" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">4</td></tr><tr><td>M3 — Threaded Inserts — M3x5x4 (<i><strong>M3 x </strong>(OD)<strong>5 x </strong>(L)<strong>4</strong> —<strong>VORON) </strong></i>(Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DnK00Kp" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">30</td></tr><tr><td>MGN12H — Linear Rail <strong>—</strong> 300mm — <strong>Black</strong> (Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_Dd5YJTr" rel="nofollow noopener">INT</a>) or <strong>SS</strong> (Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DeKhmdr" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">1</td></tr><tr><td>KEY-BAK — Super48 36&#34; 13oz (Source: <a target="_blank" href="https://www.amazon.com/KEY-BAK-Retractable-Keychain-Polycarbonate-Oversized/dp/B0088MQA10/ref=sr_1_1?crid=11NSAAWHG3GP6&amp;keywords=key-bak%2Bsuper48%2B36%22%2B13oz&amp;qid=1704371600&amp;sprefix=KEY-BAK%2B%E2%80%94%2BSuper48%2B36%22%2B13oz%2Caps%2C409&amp;sr=8-1&amp;th=1" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">1</td></tr></tbody></table></figure><figure class="table" style="width:100%;"><table><thead><tr><th colspan="2">Printed Parts</th></tr><tr><th colspan="2"><i>The most current revision is <strong>R1.1</strong> - check the change log below!</i></th></tr></thead><tbody><tr><td>Printed parts</td><td style="width:50px;"><i>16</i></td></tr></tbody></table></figure><figure class="table" style="width:100%;"><table><thead><tr><th colspan="2">Soldering iron-related parts</th></tr><tr><th colspan="2"><i><strong>Heat-set insert tips vary for the type of soldering iron used!</strong></i></th></tr></thead><tbody><tr><td>Soldering iron (<a target="_blank" href="https://s.click.aliexpress.com/e/_DdkRD1j" rel="nofollow noopener">Generic</a>, <a target="_blank" href="https://s.click.aliexpress.com/e/_DBwFzCh" rel="nofollow noopener">TS100/101</a> or <a target="_blank" href="https://s.click.aliexpress.com/e/_DdcI3Lr" rel="nofollow noopener">Pinecil</a>)</td><td style="width:50px;">1</td></tr><tr><td>Soldering Adapter for heat-set inserts (Source: <a target="_blank" href="https://cnckitchen.store/collections/soldering-tips-and-sets" rel="nofollow noopener">INT</a>)</td><td style="width:50px;">1</td></tr></tbody></table></figure><h2><strong>ASSEMBLY MANUAL</strong></h2><p><a target="_blank" href="https://files.printables.com/media/prints/609644/other_files/4843265_e59cfc31-fcd8-4017-8f65-f14361245270_7bd9886b-26d0-468e-92d9-ef99138e9d90/stealth_press_assembly_manual_rev10-20231010_iconic-fabcom.pdf" rel="nofollow noopener">Download the full assembly manual with visuals and a step-by-step guide</a>.</p><h2><strong>VIDEO BUILD GUIDES</strong></h2><h4>Iconic FAB video build guide</h4><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=TIkG8giLG9g"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/TIkG8giLG9g" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h4>Live build by Nero3D the Canuck Creator</h4><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=G3Zb9F8HbCo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/G3Zb9F8HbCo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><p><strong>Live build by ModBotArmy</strong></p><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=mqJDLKIEuqs"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/mqJDLKIEuqs" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h2><strong>SUPPORTED SOLDERING IRONS</strong></h2><p><a target="_blank" href="https://s.click.aliexpress.com/e/_DdzrJd3" rel="nofollow noopener">Generic</a>, <a target="_blank" href="https://s.click.aliexpress.com/e/_DBwFzCh" rel="nofollow noopener">TS100/101</a> or <a target="_blank" href="https://s.click.aliexpress.com/e/_DdcI3Lr" rel="nofollow noopener">Pinecil</a>.</p><p>&nbsp;</p><h2><strong>PRINT GUIDELINES</strong></h2><p>Here are print guidelines for you to follow and have decent success with printing parts:</p><figure class="table" style="width:100%;"><table><tbody><tr><td>3D PRINTING PROCESS</td><td>FDM (fused deposition modeling)</td></tr><tr><td>INFILL TYPE</td><td>Grid, Gyroid, Honeycomb, Triangle or Cubic</td></tr><tr><td>MATERIAL</td><td>ASA, ASA-CF, ABS, ABS+, ABS-CF</td></tr><tr><td>INFILL PERCENTAGE</td><td>40% - 60%</td></tr><tr><td>LAYER HEIGHT</td><td>Recommended: 0.2mm</td></tr><tr><td>WALL COUNT</td><td>Recommended: 4</td></tr><tr><td>SOLID TOP/BOTTOM LAYERS</td><td>Recommended: 5</td></tr><tr><td>EXTRUSION WIDTH</td><td>Forced 0.4mm</td></tr></tbody></table></figure><h4>Side notes to the print guidelines:</h4><p>You can succeed with Support cubic infill type (slicer support may vary) and as little as 25% infill for all parts if are aiming for faster print speeds and less filament usage. PLA, PLA+, and PETG are also considerable filament choices. However, take into account that soldering iron radiates some indirect heat. <strong>The usage of less temperature-stable filaments may result in part deformations over time.</strong></p><p>It is recommended to use ASA or ABS at least for “arm” and “iron mount” parts. A wall count of 4 is an <strong>absolute must</strong> to ensure the structural integrity of the parts. There is no need to go over the top with this. <strong>4 are for this particular build.</strong></p><h4>File naming for printed parts:</h4><p>The parts use this naming convention:</p><ul><li><strong>PRIMARY COLOR</strong> — These files will have nothing at the start of the filename. <i>Example: buildplate_x1.stl</i></li><li><strong>ACCENT COLOR</strong> — Files have “[a]” to the front of any STL file that is intended to be printed with accent color. <i>Example: </i><strong>[a]</strong><i>_bushing_x1.stl</i></li><li><strong>COUNT OF PARTS </strong>— Files have “x1” to “x4” at the end of any STL file. The number represents the count of identical parts to be printed. <i>Example: </i><strong>[a]</strong><i>_m5_1mm_spacer_x4 (In this case you will need to print 4 identical spacers).</i></li></ul><p>&nbsp;</p><figure class="table" style="width:100%;"><table style="background-color:#f9cd4218;border-color:#f9cd42;border-style:solid;"><tbody><tr><td><h3><strong>CREDITS AND ACKNOWLEDGEMENTS</strong></h3></td></tr></tbody></table></figure><p>Special thanks to Stefan and Alexander from<strong> </strong><a target="_blank" href="https://www.cnckitchen.com/" rel="nofollow noopener"><strong>CNCKitchen</strong></a><strong> </strong>for backing this project by providing a generous set of soldering-iron tips and heat-set inserts for building and testing purposes.</p><p><strong>Here is the list of other open-source projects used for sourcing multiple CAD parts</strong>. Models are used as-is or modified to fit the project purpose and design:</p><ul><li>VORON TAP: <a target="_blank" href="https://github.com/VoronDesign/Voron-Tap" rel="nofollow noopener">https://github.com/VoronDesign/Voron-Tap</a> <i>[CAD models for heat-set inserts and bolts]</i></li><li>VORON Switchwire: <a target="_blank" href="https://github.com/VoronDesign/Voron-Switchwire" rel="nofollow noopener">https://github.com/VoronDesign/Voron-Switchwire</a> <i>[Base for remix of KEY-BAK mounting parts]</i></li><li>Ender SW: <a target="_blank" href="https://github.com/boubounokefalos/Ender_SW" rel="nofollow noopener">https://github.com/boubounokefalos/Ender_SW</a> <i>[Base for remix of Support arms]</i></li></ul><figure class="table" style="width:100%;"><table style="background-color:#F5F5F5;border-color:#808080;border-style:solid;"><tbody><tr><td><h3><strong>CHANGELOG</strong></h3></td></tr></tbody></table></figure><figure class="table" style="width:100%;"><table><tbody><tr><td style="width:100px;"><strong>Date</strong></td><td><strong>Change</strong></td></tr><tr><td>14.11.2023</td><td>STLs for variations of generic soldering iron mounts were added <strong>supporting 18mm and 19mm (OD) irons.</strong></td></tr><tr><td>12.11.2023</td><td>Minor update preparing for Dremel Add-On release. leg_x1_r1.1.stl is updated to <strong>leg_x1_r1.1_1</strong>.stl removing safety buffers.<br><br><i>This was necessary to ensure cross-compatibility in between base parts and multiple add-ons in development.</i></td></tr><tr><td style="width:100px;">04.11.2023</td><td><p>Printed files updated to R1.1. with cosmetic changes to <strong>ALL</strong> parts. <i>(Note that mechanical parts - BOM is not affected, zero changes there.)</i><br><br>What&#39;s new:<br><br>— <strong>All heat-set insert hole sizes are now reworked to 4.7mm</strong> solving the issue of being too tight and pushing out excessive plastic. Holes now have 0.4mm fillets on both the entry and the end.</p><p>— <strong>Wire strain reliefs now have an extra opening for the M3 bolts</strong> solving an issue that the bolts were too hard to fit in.</p><p>— The <strong>LEG plate now has specific safety buffers </strong>preventing linear rail bearing carriage accidental slide-offs (Sometimes referred to as <i>dropping balls :)</i> Do not do that.)</p><p>— <strong>Ton of other incremental improvements</strong> optimizing general printability of parts even better than it was in Rev.1.0</p></td></tr><tr><td style="width:100px;">10.10.2023</td><td>.STEP files added for <strong>soldering iron mounts only</strong> (for all 3 currently supported types - Pinecil, TS100 / 101, and “Generic”.</td></tr><tr><td>26.10.2023</td><td>Minor changes in BOM - Key-bak Super48 36&#34; 13oz variant as recommended.</td></tr><tr><td style="width:100px;">11.10.2023</td><td><strong>Initial version (Rev1)</strong></td></tr></tbody></table></figure>

Stealth Press (Heat Set Insert Press)

Tools

squirrelbrain

<p>&nbsp;</p><p>U will need: </p><ul><li>Case - M2.5x10 self tapping screws X13</li><li>Pi - M2.5x6-8 self tapping screws X4</li><li>Mounting Case - M5x10 BHCS or SHCS X2-4</li><li>4010 Fan - M3x12 BHCS X4 + M3 Heatset inserts X4</li></ul><p><strong>No supports are needed for this design.</strong></p><p><strong>Red faces can be removed for wire/ribbon access (see 3MF)</strong></p>

Raspberry Pi 4 Case

Raspberry Pi

PWmodder1027

<p>New Designs will be added as I make them.  Keep an eye out for more.</p><p>&nbsp;</p><p>Wanted to include some options for branding on this box.  I'll continue to add more.  If there's something you'd like, leave me a comment or send a message.</p><p>I will continue to add new logos as time goes on.  check back now and again.</p><p>Each lid is designed for the AMS to be used.  Printing the individual logo pieces will probably not fit as there is no space for tolerance</p><p>Print 2 hinges, and 2 latches</p><p>You also need 8 M3x20 bolts for the hinge and latches.</p><p>Original design by Coffey72 which is a remix of a design by zx82net</p><p><a href="https://www.printables.com/model/387779-bambu-labs-tool-box-x1c-p1p" rel="nofollow">https://www.printables.com/model/387779-bambu-labs-tool-box-x1c-p1p</a></p><p><a href="https://www.printables.com/model/59227-zx82net-ultimate-parametric-rugged-box-snap-closur" rel="nofollow">https://www.printables.com/model/59227-zx82net-ultimate-parametric-rugged-box-snap-closur</a></p><p>For those who have been asking how it's done, there's a youtube video out now which has a great process.  I use a 2mm depth to ensure colors don't bleed but the concept is solid. This is the link to the video : <a href="https://www.youtube.com/watch?v=EJvzNb2g3Qk" rel="nofollow">https://www.youtube.com/watch?v=EJvzNb2g3Qk</a> Uploaded by user Jermaul W</p><p>&nbsp;</p><p>If you feel so inclined, buy me a coffee : <a href="https://www.buymeacoffee.com/pwmodder1027" rel="nofollow">Coffee</a></p>

Bambu Labs Tool Box : Alt Brands

Storage Boxes

Schidter

<p>I hope you enjoy the model I've had fun tinkering with. Please see some notes below which might improve your experience:</p><p>&nbsp;</p><p>No outside materials required! Rubber bands and glue are totally optional.</p><p>&nbsp;</p><p>When removing the card from the bed, do so gently or the connections may break.</p><p>&nbsp;</p><p>If the plane doesn't behave the way you want it to, bend the foils. For my prints, bending the foils on the rear wing downward made it fly nice and smoothly.</p>

DIY Glider Kit Card - Flies Great!

Kit Cards

CATIAV5FTW

<p><strong>1/2/2024 UPDATE: </strong>I have incorporated several minor design improvements to the parts to improve clearances, ease of printing, and ease of assembly. Parts require fewer supports as well. These updates are included in the <strong>Jet Engine Model for Kit-006</strong> print profile. <span style="color:hsl(240,75%,60%);">This is the latest and greatest profile, so I highly recommend using this from now on. </span>The parts from the previous release, now renamed<strong> (OLD) Jet Engine Model for Kit-006</strong>, are still compatible with these new parts, however, so you don’t have to reprint the whole thing if you don’t want to.</p><p>&nbsp;</p><p>Overview:</p><p>A cutaway model of a 2-spool high bypass turbofan. I designed the whole engine from scratch with cues to certain existing engines. For example, I think Rolls-Royce makes the best-looking fans, so there&#39;s some resemblance there... Since originally uploading to Thingiverse in 2016, the popularity of this model has grown far beyond expectations. The model has appeared in numerous publications, additive manufacturing expos/conferences, and is (for better or worse) being made and sold by a number of 3rd parties. However, rest assured that this is one of the official sources for this model. A bunch of remixes of this engine are out there, mostly in Thingiverse at the moment, if you are so inclined. I&#39;ve also designed an <a target="_blank" href="https://makerworld.com/models/158422" rel="nofollow noopener">alternate fan for this engine</a> that more closely resembles GE and P&amp;W engines. Check it out!</p><p>&nbsp;</p><p>I uploaded a diagram with labels to all parts for reference. For more detailed instructions, the YouTube assembly guide at the bottom of this description walks you through the process.</p><p>&nbsp;</p><p>Please refer to the BOM (Bill of Materials, aka Parts List) below for keeping track of what parts to print.</p><p>&nbsp;</p><p>===</p><p>The required fasteners (screws, washers, and nuts) and ball bearings are listed below. However, to make your life easier, there is an official hardware kit that includes these components: <a target="_blank" href="http://shrsl.com/4cfq0" rel="nofollow noopener"><strong>Jet Engine Model Components Kit - 006</strong></a><strong>. </strong></p><ul><li>Metric machine screw, allen socket cap, 2.5mm x 0.45mm x 10mm (QTY 100)</li><li>Metric flat washer, 2.5mm (QTY 200)</li><li>Metric hex nut, 2.5mm x 0.45mm (QTY 100)</li><li>6204 open ball bearing 20x47x14 (QTY 2)</li><li>6003 open ball bearing 17x35x10 (QTY 2)</li></ul><p>The jet engine will look great in any filament, but what I recommended (and what is pictured) are the following:</p><ul><li><a target="_blank" href="http://shrsl.com/4cfqh" rel="nofollow noopener"><strong>PLA Basic Jade White</strong></a></li><li><a target="_blank" href="http://shrsl.com/4cfqm" rel="nofollow noopener"><strong>PLA Basic Blue-Gray</strong></a></li><li><a target="_blank" href="http://shrsl.com/4cfqs" rel="nofollow noopener"><strong>PLA Basic Black</strong></a></li><li><a target="_blank" href="http://shrsl.com/4cfr0" rel="nofollow noopener"><strong>PLA Metal Cobalt Blue Metallic</strong></a> --OR-- <a target="_blank" href="http://shrsl.com/4cfrd" rel="nofollow noopener"><strong>PLA Metal Iron Gray Metallic</strong></a></li></ul><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=dNsBbN54J-I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/dNsBbN54J-I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><p>&nbsp;</p><p>Disclaimer: This model is part of the Creator Program, When you purchase the Jet Engine Model Components Kit - 006 and filament<br>through the links above, creators may earn an affiliate commission as a reward of their work. (The creator program is<br>currently in the trial phase. The application is not yet open to the public.)<br>===</p><p>&nbsp;</p><p>Good luck and happy printing! Message me with any questions!</p>