mrhansen7692

Rober7Crow

Since the users were happy and there were some suggestions,I decided to look into it a bit more and make some improvements.&nbsp;-the possibility of taking one tablet a day-the possibility of taking two tablets a day-larger size and easier accessibility-smaller version available-no more lifting and no mixing of the smaller tablets inside box-when you turn the knob for the first time, the cover locks and is released when the refill appears again-more reliable stopping at the right position and a click appears&nbsp;If you take the tablets once a week you will refill every other week, if you take them twice you will refill once a week.Below is a picture of how it is assembled, only the handle sticks.&nbsp;Update:22.04.2024 added profile for a small box22.04.2024 added new cover in English language22.04.2024 added new cover in English no AMS language22.04.2024 added new cover in Slovenian language23.04.2024 added new cover in German, French, Czech language23.04.2024 added sample cups for size testing24.04.2024 corrected Wednesday from WEN to WED, a troll came to my place to play tricks on me24.04.2024 added print profile for level 1 with markings25.04.2024 added new design for the base 26.04.2024 added new cover in Spanish language26.04.2024 reinforced locking knob27.04.2024 added new cover in Bosnian language13.05.2024 added new cover in Russian language20.05.2024 added new cover in Turkish and Finnish language25.05.2024 added new cover in Polish language&nbsp;Old version:<a target="_blank" href="https://makerworld.com/en/models/174640#profileId-192020" rel="nofollow noopener">Weekly pill dispenser by Rober7Crow - MakerWorld</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433967/design/2024-04-18_15534c10fda21.png"></figure>

One Click weekly pill dispenser V2.0

Meds

Good Day Designs

Hey everyone!I just started getting into electronics and design after a bit of 3D printing. This is my first official project with proper documentation, measurements, and testing around a Raspberry Pi. The design is purposeful where the SSDs stick out and with cables going around, wrapped in a cable sleeve for an interesting look. The OLED helps to monitor the device and to check ip.Updates:<ul><li>9/22/2023: Initial release</li></ul>Parts used:<ul><li>1x Raspberry Pi 4B 2gb</li><li>1x OLED 0.96 i2c display module</li><li>Required cables (ethernet, power cable, etc.)</li><li>1x 60mm 5v USB fan</li><li>2x USB to SATA cable</li><li>2x SSD 2.5"</li><li>2x M3 14mm-16mm screw</li><li>23x M3 6mm screw</li><li>25x M3 4mm screw</li><li>2x M3 nut</li></ul><a target="_blank" href="https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_4?crid=XHDE9KMMJRLB&keywords=sata%2Bto%2Busb%2Bconnector&qid=1695431511&s=industrial&sprefix=sata%2Bto%2Busb%2Bconenctor%2Cindustrial%2C86&sr=1-4&th=1" rel="nofollow noopener">https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_4?crid=XHDE9KMMJRLB&keywords=sata%2Bto%2Busb%2Bconnector&qid=1695431511&s=industrial&sprefix=sata%2Bto%2Busb%2Bconenctor%2Cindustrial%2C86&sr=1-4&th=1</a>All up to you but this is how I printed mine:<ul><li>Printer: Bambu Lab P1P & Elegoo Neptune 3 Plus - for the inner panels</li><li>Some adjustments have to be made in terms of the base</li><li>Walls: 4</li><li>Top/bottom: 4</li><li>Nozzle: 4mm</li><li>Layer height: 0.16mm</li><li>Infill: 15-20% - any pattern</li><li>Supports: ON for outer panels - tree</li><li>Brim: ON for outer panels</li></ul>Here are some assemblies to help install and notes:<ul><li>SSD side bracket is to be mounted inside, keeping the 2 SSDs in place</li><li>60mm USB fan apparently can't be controlled so I'd recommend an adapter with a physical knob attached</li><li>There are 3 versions of Front Panel Outer for OLED, no OLED, and additional airflow.</li><li>SSD top panel bracket only needs 2 screws for SSD on the top as it's stable enough</li></ul><figure class="image image_resized" style="width:52.04%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_f2d7f21300bcb.png"></figure><figure class="image image_resized" style="width:52.41%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_d87cad8bcc57c.png"></figure><figure class="image image_resized" style="width:52.2%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_3c89542c443da.png"></figure>Please leave any comments/feedback as they would be greatly appreciated!

Meds

pi stuff