Search models, users, collections, and posts
Bio
I'm a beginner in the 3D world and I started my hobby by purchasing a Bambu Lab A1 mini Combo.
Achievements
MakerWorld Guardian
Active more than 20 days out of last 30 days UTC time
While searching for files to print lip balm holders, I found and printed a few, but none of them supported a 20 mm diameter, common in lipsticks. So, I decided to create a specific model with that dimension.
lipstick/lip balm holder
62
213
Share
0
0
0
First, I made this project at a reduced scale (70%) and had problems with the leg joints, which didn't work and even broke when I tried to detach them. Then, I made it at full scale and it turned out great, with everything working. They still need to be painted...
Share
0
0
0
I made this project on a reduced scale (70%) and had no problems. I chose to use a single color to paint it later. Perfect!
Share
0
0
0
I made this project on a reduced scale (70%) and had no problems. I chose to use a single color to paint it later. Perfect!
Share
0
0
0
The final project is very interesting and realistic. I printed two units, and on one of them, the leg came loose from the board mid-print. I suggest putting brim ears at the base of the legs to avoid this problem.
Share
0
0
0
I adjusted the scale to 50% and it was perfect. I assembled it using the project photos and had no fitting problems.
Share
0
0
0
Share
0
0
0
This is a project that has been very well received by children. The detail of the eyes being made of separate pieces, although requiring some care during assembly, makes decorating easier.
Share
0
0
0
This is a project with above-average flexibility. The heart detail in the eyes is nice but difficult to color - it would be helpful to have that detail in separate pieces to make the final decoration easier.
Share
0
0
0
This is a really cool project to print. The detail of the eyes on separate pieces made the final decoration much easier.
Share
0
0
0
This is a really cool project to print. The leg and body joints worked very well. After fitting and adjusting the position, it was quite stable but still allowed for repositioning if desired. The only adjustment needed was for the eye piece, as it was too tight and difficult to insert – using a drill and the right drill bits, it was possible to gently widen the holes, making the fit perfect.
Share
0
0
0
Share
0
0
0
Share
0
0
0
Print as described. Easy to paint the details.
Share
0
0
0
Everything worked according to the plan and description. I've made 2 pieces at same time!
Share
0
0
0
Everything worked according to the plan and description.
Share
0
0
0