mr.maxproof

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA+ IIID Max Black Transmission Distance: 0.5 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ IIID Max White Transmission Distance: 5.6&nbsp;Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Grey At layer #21 (1.76mm) swap to White for the rest.

Western Era Church Art Hueforge

Bookmarks

Sakul

Quick Towel Hanger Towel hanger for quick and easy hanging up towels with one hand. <img src="https://makerworld.bblmw.com/makerworld/draft/722020/2024-03-17_8c42434407ef4.jpg"> The hanger has a TPU cover that makes it easy to attach and remove towels without the hassle of searching for the towel catch. <img src="https://makerworld.bblmw.com/makerworld/draft/722020/2024-03-17_6f57de7e38074.jpg"> The hangers can be attached either with double-sided adhesive tape or with a screw.

Quick Towel Hangers

household

Nerro3D

Christmas lantern prepared to put four different designs. Prepared to place an LED candle up to 38mm inside. Access to the LED candle is made from below with a threaded lid to make it easier to turn it off and on. To place the different designs you only have to remove the four nuts that hold the top cover and fit them through the rails. Use two walls and 15% infill for all the pieces of the lantern, that is enough since it is not a design that requires too much strength, and thus you will save material and printing time. The fronts are best printed with 100% infill. It has been designed leaving a certain tolerance so that the pieces fit in fairly but without problems, but it is also recommended that you take into account the tolerances of your printer. There are thirteen different designs so you can put the ones you like the most. Hope you enjoy.&nbsp;2023-11-16Corrected: Small tolerance adjustments to make it easier for everything to fit

Chistmas Lantern

night light

DonMatis

Customize your Halloween wall clocks! Pick your preferred front and back themes, and decide if you'd like unique minute/hour pointers to create your personalized timepiece.&nbsp;Need an additional clock mechanism, i've used <a target="_blank" href="https://www.amazon.co.uk/dp/B08B8X1FN5?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">this one from Amazon</a>&nbsp;<h3>Print Instructions</h3>For a hassle-free print, use my available profiles. One has the clock's back piece and hour/minute pointers, while the other offers three front hueforge themes. Simply download and select what you'd like to print.<h4>Back Piece</h4>You can choose between two, one with regular numbers and the second with Halloween symbols.Both pieces require, 0.20mm profile with arachne mode for the numbers and optionally ironing on the top surfaces&nbsp;Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Orange </li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #26 (5.20mm) swap to Orange</li></ul><h4>Hour/Minute Pointers</h4>These are designed to work with the specific clock mechanism i used. It might not work for you but it is a quick and easy print to test them out. Just use Classic on the slicer with 0.20mm.&nbsp;<h4>Front Themes (Hueforge)</h4>Here there are 3 different themes that you can choose from. Each one has different layer changes. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Theme 1<figure class="image image_resized image-style-side" style="width:27.12%;"><img src="https://makerworld.bblmw.com/makerworld/draft/72573/2023-10-07_4ac20afa3d39b.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Blue Gray</li><li>PLA BambuLab Basic Orange</li><li>PLA Overture Light Yellow</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #10 (0.88mm) swap to Blue Gray</li><li>At layer #14 (1.2mm) swap to Orange</li><li>At layer #24 (2mm) swap to Light Yellow for the rest.</li></ul>&nbsp;Theme 2<figure class="image image_resized image-style-side" style="width:26.88%;"><img src="https://makerworld.bblmw.com/makerworld/draft/72573/2023-10-07_8c77c280b0ff2.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Blue Gray</li><li>PLA BambuLab Basic Orange</li><li>PLA Overture Light Yellow</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #9 (0.8mm) swap to Blue Gray</li><li>At layer #12 (1.04mm) swap to Orange</li><li>At layer #23 (1.92mm) swap to Light Yellow for the rest.</li></ul>&nbsp;Theme 3<figure class="image image_resized image-style-side" style="width:26.83%;"><img src="https://makerworld.bblmw.com/makerworld/draft/72573/2023-10-07_ad333fd492355.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Blue Gray</li><li>PLA BambuLab Basic Orange</li><li>PLA Overture Light Yellow</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #9 (0.8mm) swap to Blue Gray</li><li>At layer #11 (0.96mm) swap to Orange</li><li>At layer #23 (1.92mm) swap to Light Yellow for the rest.</li></ul>&nbsp;<blockquote>Enjoy my work? Support me by joining my club on printables.com. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.</blockquote>

Bookmarks

household

night light

Clocks