Morris.LAB

JRK Prints

Now with CURVES and FIRE!&nbsp;My original model was based on a low poly mesh. I took the time to carefully remodel the entire thing, so now it prints with nice smooth edges. Since I was remodeling it, I modified the interior of the pieces so they print with significantly less support material. The whole model with flame now takes ~400g of filaments using my profile. Due to scaling differences, this is not directly compatible with my previous model. As with the original model you may want to play with XY Hole Compensation to make the parts fit tighter or looser. I went with .1mm that gave a fairly loose fit. Filament will effect this so you may want to do some testing before printing the whole model.&nbsp;The flame prints in two pieces and is pressed together. I printed using Sunlu Orange Transparent PLA. If you'd like to support my work, consider buying the filament using the affiliate link below.&nbsp;<a target="_blank" href="https://amzn.to/3Hg3Tfg" rel="nofollow noopener">SUNLU Transparent Orange PLA</a>

Giant Lego Style Rocket v2

LEGO

Howell

This is a complete set of movement trays for 25mm round bases suitable for any miniature game or GW game using round bases.&nbsp;New version added are the LINE and ARC patterns.Please feel free to ask for any modifications.

25mm bases movement tray for miniature games

Warhammer

mario.schrank

maybe one or the other knows the problem when soldering LED strips, alligator clips make just unsightly grooves in the LED tape ... I was then found, called SolderM8 but ...Unfortunately, there is no market for this and me the shipping + customs is just too expensive. So, I sat down and tinkered me one.Edit:Update, so that there are no problems with soldering, I have included a piece of aluminum strip.Clips are also adaptedAdditionally needed:Cheese head screws M3x10pressure spring 5x0.4x20mm, or 5x0.4x25mmSlip and noise stopper 8mmAluminum bar 20x2mm&nbsp;&nbsp;

SOLDERING CLIP

Michael Teeuw

<div><h1>Summary</h1><div>A clip to mount a power strip below a desk (or similar).</div></div>

Power Strip Clip

Clip

STomHacks

I created this profile to print clear PETG as close as possible to glass clear. In the pictures I'm using Bambulab PETG Transparent.

PETG Transparent Bambulab - Clear Glass - Profile

PETG Clear

Zurlingo-3D

<h2>A Print Profile For Enabling PETG As Support Material For PLA</h2>&nbsp;I was having a lot of issues with supporting a recent design I made and could not get a good result using PLA. I spent an entire evening printing the same model over and over again, tweaking settings in between prints, until I was happy with the results using PETG as an interface layer for support.&nbsp;The model I was using to test is particularly awkward to support, with a 90 degree large surface area, threads around the rim and many holes that all need to stick to that interfacing layer.&nbsp;I ended up having to change a lot of setting from stock, but if you're interested in making your own profile then the basics are:&nbsp;<ul><li>0 Top/Bottom Z gap</li><li>Much higher interface density</li><li>A slow tool head speed when printing interface layers.</li></ul>&nbsp;Usage:&nbsp;Open the profile in Bambu studio and drop in your model of choice.&nbsp;I have included a model of my logo as an example only. You can slice this to see how the support interface works but it is not intended to be printed. You will need to delete this before dropping your own model in and slicing that.&nbsp;You need to make sure that PETG is loaded into AMS slot 4, or remove the colours that aren't needed, ensuring that the PETG stays as the support interface material.&nbsp;The rest should be taken care of by the profile settings and the printer :)&nbsp;&nbsp;Here's a picture of the stock support settings using PLA (Bambu Studio)&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/401206/2024-01-13_953a3b2582f3d.jpg"></figure>&nbsp;&nbsp;&nbsp;Here's a picture of the end result:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/401206/2024-01-13_2d4a03288d977.jpg"></figure>&nbsp;Please let me know if this works for you, or if you come up with an even better profile :)&nbsp;Happy printing!

PETG Support Interface Settings

PETG

Brad - FTBT 3D

I choose my filament by type first, then color. So I wanted a storage box for the Bambu Lab swatches that would let me easily see what variety of filament each color was vs. having all the types organized by color.&nbsp;This can be used as a stand alone display or as an insert to the Rugged Swatch Box model by Daniel3D which I remixed this from.&nbsp;Model pictured is for multi-color AMS printing. Also have a version with raised lettering and bars for single color prints with a color change.&nbsp;Print profile is for a 0.4mm nozzle, but if you have a 0.2mm nozzle the text will be even clearer. I think the text turned out pretty good with my stock 0.4mm, but could be better.

Labeled Bambu Lab Swatch Display & Insert

Bambulab

Stefan_schmid91

Skadis Spool Holder with Wood 23mmPlatte 1 - right Platte 2 - leftPlatte 3 - 10x chop