monkee

BrandedAbstract3D

<h3><strong>Model</strong></h3><p>Drinks coaster set designed to resemble Brembo Racing Brakes, unique and functional, great for any workshop, desk, or garage. It's a great conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings.</p><p>&nbsp;</p><p><strong><u>To complete the phone holder you'll need:</u></strong></p><ul><li>1 x Caliper (printable)</li><li>4 x Brake Discs (printable)</li><li>4 x Display Screws (printable)</li><li>1 x Brembo Vanity Plate (printable)</li></ul><h3>Print Settings</h3><p>I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I'm a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I've had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls and top layers to around 50mm/s seems best.</p><p>&nbsp;</p><ul><li><strong>Caliper:</strong> Use a 15% rectilinear infill—it's sturdy enough to hold all four of the coasters. And, I set the seam position to “back”. Essentially can't see any of the seams from the front.</li><li><strong>Brake Disc:</strong> Gone for a 5% infill, saving print time. I also read that a lot of the thermal transfer gets stopped by air so the more holes in the coaster the better (especially when using hot drinks) so I figured less infill could = less melted PLA. From the PLA I've used hot drinks work great on these coasters, the contact patch between the coaster and the cup/glass is actually remarkably small and hasn't melted anything at all! The bottom surface pattern is concentric to give it that super-consistent smooth look and the top layer is Archemedian Chords I find this gives the discs a nice partially worn look.</li><li><strong>Display Screws:</strong> Use a 15% infill. This part is mostly for show and serves no real use other than aesthetics. I use a standard PEI Plate and haven't had a problem with them being knocked over while printing. If you do I'd suggest using a brim and that'll fix that issue.</li><li><strong>Brembo Vanity Plate: </strong>There are two Brembo branded plates that you can stick on to the caliper. You can use CA glue to attach it, and it'll work perfectly. One plate has the Brembo logo upside down, simulating how it would be on an actual brake caliper. The other plate is right side up, making it easier to read the branding when the coaster is on your desk.</li></ul><p>Assembly is straightforward; you can easily get it from the photos. Insert the display screws into the holes, adding a dab of glue before inserting them. Apply some glue to the Vanity Plate and attach it to the front; it's super simple to align.</p><p>&nbsp;</p><p>Happy Printing!</p>

Brembo Drinks Coaster Set

useful stuff

squinn

<p>An engaging and mesmerizing fidget toy that can be used discretely, allowing you to flip and fold it around infinitely - using either one or two hands.  This model is completely print-in-place, and no supports or brim are required. </p><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/154942/2023-11-07_c12eda664d536.gif"></figure>

Infinity Flip Fidget

Fidgets

Signs 

thrutheframe

<h4>*  Please read the whole project posting before deciding if you want to print the Aux Fan Saver </h4><p>&nbsp;</p><p>Back in Aug 2022, I designed the Aux Fan Saver 1 (AFS1) to support the Aux fan in the X1C (Kickstarter version) because the VHB tapes were not secure enough. Since then, the X1C aluminium side panel and fan case design have been revised to be mounted with screws. This has made the AFS1 redundant for the newer X1C. </p><p>In Jan 2023, the P1P was introduced and I designed the Aux Fan Saver 2 (AFS2) to support the optional Aux fan for the P1P. I have also included it in the 3mf file for the <a href="https://www.printables.com/model/356301-arc-bambu-lab-p1p-enclosure" rel="nofollow">ARC enclosure</a>. Combined, there are close to 12,000+ downloads for the Aux Fan Saver familia. I would like to thank users who have provided feedback, uploaded makes and donated to this project. Your support has given me the motivation to keep this project going. </p><p>As the first year draws near, I decided to update and combine both stl into one project and include a new version of AFS2 that is beefier… I call it AFS2_FulTank. </p><p>More info below and all the best in your 3D printing journey. </p><p>&nbsp;</p><h3>Introduction</h3><ul><li>All updated versions of AFS will now have no name logo for a cleaner print. </li><li>3mf file is prepared using OrcaSlicer, you can open it with Bambu Slicer too, just will not see the build plate name. </li><li>The settings are custom for my own printer. Please use the settings that you are comfortable with according to your filament type. </li><li>Use 4-5 layers for bottom layers with 20-25% infill.  Print in PETG, ASA, Nylon or ABS. PLA or PLA+ is not recommended if you are ever going to print high-temperature material with the X1C or in an enclosed P1P. </li><li>There are 3 stl available in the 3mf file. </li></ul><figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/256442/rich_content/0392e80e-ea65-4014-a388-39e77a226ec1/afs-familia-3.png#%7B%22uuid%22%3A%2229010cb3-5b81-4d1d-a0ab-9141e29a3bd0%22%2C%22w%22%3A1674%2C%22h%22%3A1255%7D"></figure><p>Aux Fan Saver 1.0:</p><ul><li>for older versions of X1C with no screw mounts on the aluminium side panels + older versions of the Aux fan casing. </li></ul><p>Aux Fan Saver 2.0:</p><ul><li>for older versions of X1C with no screw mounts on the aluminium side panels + current of the Aux fan casing. </li><li>for P1P with or without enclosure. Can be used with existing P1P enclosures. </li></ul><p>Aux Fan Saver 2.0 FulTank:</p><ul><li>Beefier with more contact to the Aux fan casing, but uses 8-10gm more filament</li><li>for older versions of X1C with no screw mounts on the aluminium side panels + current of the Aux fan casing. </li><li>for P1P with or without enclosure. Can be used with existing P1P enclosures. </li></ul><p>&nbsp;</p><p>Bambu Lab has updated its design of the Aux fan casing. The current design has mounting points that can be screwed to the aluminium side panel of the X1C. Please check the version of your Aux Fan before deciding to print.</p><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/256442/rich_content/619ecf21-f992-48ff-8f99-72d5c93e95fc/new_aux_fan.jpg#%7B%22uuid%22%3A%22ab154774-4a91-46da-ae80-4210edd7591d%22%2C%22w%22%3A2000%2C%22h%22%3A1500%7D"></figure><h4> </h4><h4><strong><u>Aux Fan Saver 1.0</u></strong></h4><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/256442/rich_content/e4443d4b-3cf0-49d3-a52d-098db0504d99/afs-familia-afs1.png#%7B%22uuid%22%3A%228c3d0dbd-ee37-4958-9898-f213a670663b%22%2C%22w%22%3A1859%2C%22h%22%3A1394%7D"></figure><ul><li>Print as per orientation. No support is needed. </li><li>You will need to add a 1.5mm foam/silicone base to help reduce the vibration. </li><li>Requires two M3x6mm screws can be used to secure the fan to the enclosure. You can find spare screws in the kit. </li></ul><h4><strong><u>Aux Fan Saver 2.0 / FulTank</u></strong></h4><figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/256442/rich_content/b7721d5e-b4aa-4b67-99f0-9957cbf8b93e/afs-familia-afs2.png#%7B%22uuid%22%3A%2258c71188-49e6-46f6-ba9b-8ce6782a2abe%22%2C%22w%22%3A1859%2C%22h%22%3A1394%7D"></figure><figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/256442/rich_content/d37326be-d59f-4484-8fb9-8cd79747ddaa/afs-familia-afs2_fultank.png#%7B%22uuid%22%3A%229b89024a-8a49-4145-a9dd-627571e4cc9e%22%2C%22w%22%3A1859%2C%22h%22%3A1394%7D"></figure><figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/256442/rich_content/4b060e3a-8463-4c23-a7b2-1856f01d868c/afs-familia-2.png#%7B%22uuid%22%3A%22d79d8894-4ab1-4296-ba96-3fd08b263916%22%2C%22w%22%3A1280%2C%22h%22%3A1024%7D"></figure><ul><li>Print as per orientation. supports are needed. </li><li>The Aux fan casing is secured to the AFS2.0/FulTank with two M3x16 screws and a small piece of VHB tape for extra adhesion. </li><li>The whole setup is then secured to the base of the enclosure with two M3x6mm screws.<ul><li>M3x10mm hex screw - 2</li><li>M3x6mm hex screw - 2</li><li>VHB tape (>2mm thickness) - 2</li><li>M3xOD5mmxH4mm brass insert - 2 </li></ul></li></ul><p>&nbsp;</p><h3>Why named it AFS Familia? </h3><p>Anyone familiar with DanMachi anime will know that growth involves a lot of trials and tribulations. A mod design may work initially but must grow and improve to be better.  You can watch the anime on <a href="https://www.bilibili.tv/en/search-result?q=is%20it%20wrong%20to%20try%20to%20pick%20up%20girls%20in%20a%20dungeon%3F" rel="nofollow">Bilibili</a> </p><figure class="image image_resized" style="width:35.08%;"><img src="https://media.printables.com/media/prints/256442/rich_content/e6d00aec-56aa-4f71-96c7-5a75976a12c2/hesita-familia.jpeg#%7B%22uuid%22%3A%227674903d-9d20-4617-8acb-110ccb61d30b%22%2C%22w%22%3A1920%2C%22h%22%3A2560%7D"></figure><p>&nbsp;</p><p>To date, all my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like my design and want to contribute to my coffee addiction & help fund the filaments I need for prototyping, a donation of $5-$10 to <a href="https://ko-fi.com/thrutheframe" rel="nofollow">Ko-fi</a> or <a href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow">paypal.me</a> will be greatly appreciated. </p><p>&nbsp;</p><h3>Caveat</h3><p>As with all my designs, it may and may not work for you. So print and install at your own discretion. </p>

Aux Fan Saver Familia for Bambu Lab printers

X1C MODS

<h3><strong>NOTE:</strong></h3><ul><li>Please read the instruction guide below. </li><li>Download the 3mf file if you are using a Bambu slicer. Download the stl if you are using other slicers. </li><li>I do my best to double-check and test the print profiles I created. Therefore, I will only take feedback and update for those profiles. I cannot vouch for profiles uploaded by others, so please do due diligence.</li></ul><h4> </h4><h3><strong>UPDATE 6 Aug 2023</strong></h3><p>My Bambu cube needed an update, so here it is. Embosses are now 1.4mm rather than 2mm. Kind of overkill with a 2mm overhang. The base of the cube now fits 608 bearings. This will allow the cube to spin when placed on the Bambu dish. </p><figure class="image image_resized" style="width:357.003px;"><img src="https://media.printables.com/media/prints/222285/rich_content/6344c28b-2a73-4bc5-a89c-0fce944065aa/thumbs/cover/800x640/png/bambu-cube-update-1.webp"></figure><h3><strong>INTRODUCTION</strong></h3><p>A fun project to design an XYZ calibration cube with a Bambu Lab theme. I designed this because I dislike printing benchy.</p><ul><li>Bambu Cube 30x30mm</li><li>All embossed is 1.4mm deep</li><li>This print test for overhang, dimension accuracy and fitting. </li><li>No support is needed. </li><li>The circular hole for 608 bearings is designed with a diameter of 22.2mm </li><li>(optional print) Bambu Cover is 2mm thick and fits exactly into the top opening with 0.2mm offset; to test part fitting. </li><li>(optional print) Bambu Dish is 80mm in diameter and 10mm in height; to display the Bambu Cube and check the seam finish.</li></ul><p style="text-align:center;"><a target="_blank" href="https://www.youtube.com/shorts/N0OXzKaYPGU" rel="nofollow noopener">Youtube short of the Bambu Cube</a></p><p>&nbsp;</p><p>To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like them and want to contribute to my coffee addiction & help fund the filaments I need for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated. </p><h3>CAVET</h3><p>As with all my designs, it may and may not work for you. So print and install at your own discretion. </p>

Bambu Lab XYZ Calibration Cube

Tests

Scattered Collectables

<p>Ornamental Pokeball model</p><p>Simple print, supports not necessary but can help bridging. Glue the parts together or leave the top unglued so you can open it and put something inside</p><p>The outer ring is optional, the part just slides over and can be held on with glue</p><p>&nbsp;</p><p>Join my patreon for the right to sell physical prints https://www.patreon.com/ScatteredCollectables</p>

Ornamental Pokeball

Desktop models

Slowpoke's Workshop

Christmas decoration corner of door snowman-snowflakes

X-mas prints

fredefland

<p>Add some fun to your Christmas tree this year! This will for sure get you on the naughty list ;).</p><p>&nbsp;</p><p>From a deleted reddit post <a target="_blank" href="https://www.reddit.com/r/funny/comments/ydcbe5/its_a_snowflakebut_if_you_look_closely/?utm_source=share&utm_medium=ios_app&utm_name=iossmf" rel="nofollow noopener">https://www.reddit.com/r/funny/comments/ydcbe5/its_a_snowflakebut_if_you_look_closely/?utm_source=share&utm_medium=ios_app&utm_name=iossmf</a></p><p>&nbsp;</p><p>Originally from my thingiverse: https://www.thingiverse.com/thing:5588264<br> </p>