mong.nicholas

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

shoes

Drunken_Monkey

<h3>Description</h3>Iso 7010 - Prohibition Signs&nbsp;In my profiles there is 1 sign per printing plate, the printing plates are named accordingly.As the number of printing plates per profile is limited, the files are divided into several profiles.&nbsp;The Signs are already colored and an AMS is neccessary.&nbsp;You may also be interested in my other ISO 7010 Sign collections:&nbsp;ISO 7010 - Mandatory Signs:<a target="_blank" href="https://makerworld.com/en/models/422166#profileId-325153" rel="nofollow noopener">ISO 7010 - Mandatory Signs (M001 - M060) by Drunken_Monkey - MakerWorld</a>&nbsp;Iso 7010 - Fire protection Signs:<a target="_blank" href="https://makerworld.com/en/models/422159#profileId-325142" rel="nofollow noopener">ISO 7010 - Fire protection Signs (F001 - F019) by Drunken_Monkey - MakerWorld</a>&nbsp;ISO 7010 - Safe condition Signs<a target="_blank" href="https://makerworld.com/en/models/422418#profileId-325474" rel="nofollow noopener">ISO 7010 - Safe condition Signs (E001 - E070) by Drunken_Monkey - MakerWorld</a>&nbsp;ISO 7010 - Safe condition Signs (Emergency Exit with Directions)<a target="_blank" href="https://makerworld.com/en/models/422582#profileId-325677" rel="nofollow noopener">ISO 7010 - Emergency Exit Signs with Directions Remixed by Drunken_Monkey - MakerWorld</a>&nbsp;ISO 7010 - Warning Signs:<a target="_blank" href="https://makerworld.com/en/models/422168#profileId-325155" rel="nofollow noopener">ISO 7010 - Warning Signs (W001 - W080) by Drunken_Monkey - MakerWorld</a>&nbsp;for more Information about ISO 7010 I added the Wikipedia link:<a target="_blank" href="https://en.wikipedia.org/wiki/ISO_7010" rel="nofollow noopener">ISO 7010 - Wikipedia</a>&nbsp;Datails:&nbsp;The signs have a diameter of 100mm.&nbsp;<figure class="table"><table style="background-color:rgb(248, 249, 250);border:1px solid rgb(162, 169, 177);"><tbody><tr><td style="border:1px solid rgb(162, 169, 177);padding:0.2em 0.4em;">Backgroundcolor</td><td style="border:1px solid rgb(162, 169, 177);padding:0.2em 0.4em;">Signalwhite (RAL 9003) and diagonal crossed Signalred border (RAL 3001)</td></tr><tr><td style="border:1px solid rgb(162, 169, 177);padding:0.2em 0.4em;">Symbolcolor</td><td style="border:1px solid rgb(162, 169, 177);padding:0.2em 0.4em;">Signalblack (RAL 9004)</td></tr></tbody></table></figure>&nbsp;ISO 7010 - Prohibition (1 of 3)<ul><li>P001 – General prohibition sign</li><li>P002 – No smoking</li><li>P003 – No open flame</li><li>P004 – No thoroughfare</li><li>P005 – Not drinking water</li><li>P006 – No access for forklift trucks and industrial vehicles</li><li>P007 – No access for people with active implanted cardiac devices</li><li>P008 – No metallic articles or watches</li><li>P009 – No climbing</li><li>P010 – Do not touch</li><li>P011 – Do not extinguish with water</li><li>P012 – No heavy load</li><li>P013 – No activated mobile phone</li><li>P014 – No access for people with metallic implants</li><li>P015 – No reaching in</li><li>P016 – Do not spray with water</li><li>P017 – No pushing</li><li>P018 – No sitting</li><li>P019 – No stepping on surface</li><li>P020 – Do not use lift in the event of fire</li><li>P021 – No dogs</li><li>P022 – No eating or drinking</li><li>P023 – Do not obstruct</li><li>P024 – Do not walk or stand here</li><li>P025 – Do not use this incomplete scaffold</li><li>P026 – Do not use this device in a bathtub, shower or water-filled reservoir</li><li>P027 – Do not use this lift for people</li><li>P028 – Do not wear gloves</li><li>P029 – No photography</li><li>P030 – Do not tie knots in rope</li><li>P031 – Do not alter the state of the switch</li><li>P032 – Do not use for face grinding</li><li>P033 – Do not use for wet grinding</li><li>P034 – Do not use with hand-held grinder</li><li>P035 – Do not wear metal-studded footwear</li><li>P036 – No children allowed</li></ul>&nbsp;ISO 7010 - Prohibition (2 of 3)<ul><li>P037 – Do not leave the tow-track</li><li>P038 – Do not swing the chair</li><li>P039 – Hot works prohibited</li><li>P040 – Do not set off fireworks</li><li>P041 – No leaning against</li><li>P042 – Not for pregnant women</li><li>P043 – Not for people in the state of intoxication</li><li>P044 – Use of smart glasses prohibited</li><li>P045 – No campfire</li><li>P046 – Do not stretch out of toboggan</li><li>P047 – Do not ram into toboggans</li><li>P048 – No running</li><li>P049 – No swimming</li><li>P050 – No snorkelling</li><li>P051 – No sub-aqua diving</li><li>P052 – No diving</li><li>P053 – No sailing</li><li>P054 – No windsurfing</li><li>P055 – No manually powered craft</li><li>P056 – No mechanically powered craft</li><li>P057 – No personal water craft</li><li>P058 – No towed water activity</li><li>P059 – No surf craft</li><li>P060 – No outdoor footwear</li><li>P061 – No jumping into water</li><li>P062 – No pushing into water</li><li>P063 – No body boarding</li><li>P064 – No surfing between the red-and-yellow flags</li><li>P065 – No kite surfing</li><li>P066 – No parasailing</li><li>P067 – No sand yachting</li><li>P068 – Do not expose to direct sunlight or hot surface</li><li>P069 – Not to be serviced by users</li><li>P070 – Do not put finger into the nozzle of a hydromassage</li><li>P071 – Do not cross barrier</li><li>P072 – No jumping down</li></ul>&nbsp;ISO 7010 - Prohibition (3 of 3)<ul><li>P073 – Do not shut lid when burners are operating</li><li>P074 – Child seat installation prohibited</li><li>P075 – Do not stare at light source</li></ul>

ISO 7010 - Prohibition Signs

signs

Infinity 3D Prints

a cup marking station for eventsSome ca glue on the sides of the front plate does a great job on bonding them together . No need for a ton of glue . Less is more  :)

mark your cup and drink up station

jajaum3d

🌟 Support My Work &amp; Unlock Exclusive Benefits!🌟 Become a patron on <a target="_blank" href="https://bit.ly/3GjRxSO" rel="nofollow noopener">Printables.com</a> (https://www.printables.com/@jajaum3d#join:64) and gain access to early releases, commercial licenses, and more.&nbsp;Celebrate the universal love for mothers with our &#34;Multilingual Best Mom Headband.&#34; Designed as a joyful accessory for Mother&#39;s Day celebrations or family gatherings, this festive headband features the phrase &#34;World&#39;s Best Mom&#34; in multiple languages. It&#39;s the perfect way to add a touch of global appreciation and fun to any celebration honoring mothers.&nbsp;This design is ideal for personal use and adds a fun, international twist to any celebration, making it an unforgettable part of your family&#39;s Mother&#39;s Day tradition.&nbsp;Choose your language file, and let this headband be a highlight of your Mother&#39;s Day festivities. Whether for your mom, wife, sister, or friend, this headband is a delightful and spirited expression of appreciation. Languages Included: English, Spanish, French, German, Italian, Russian, Simplified Chinese, Japanese, Korean, Arabic, and Portuguese. No painting, supports, assembly, or glue required. See all my designs on Cults: <a target="_blank" href="https://cults3d.com/en/users/jajaum3d/creations" rel="nofollow noopener">https://cults3d.com/en/users/jajaum3d/creations</a> All my designs are protected by Copyright Law. Purchasing does not grant the right to sell any digital file or printed model of my designs without explicit consent. Please respect the hard work of 3D artists by never sharing or selling digital files. <h3>3D Printing Settings</h3><ul><li>File Format: 3MF, designed for hassle-free printing without any supports or brim.</li><li>Pre-Oriented: File is pre-oriented for optimal printing.</li><li>Recommended Settings: For the best durability, use at least 3 walls.</li><li>Dual-color: The design has 2 colors but can be printed on any printer by changing the filament mid-print: 1.Start with red. 2.At 1.2mm, pause and change the filament to white. 3.(Optional) At 2.2mm, change back to red. TIP: For color change in PrusaSlicer, watch the tutorial: <a target="_blank" href="https://www.youtube.com/watch?v=CtC5vAK94qA" rel="nofollow noopener">https://www.youtube.com/watch?v=CtC5vAK94qA</a></li></ul>

Multilingual Best Mom Headband

mother's day

Real World Prints

We needed a low profile corner mount bracket for a Reolink TrackMix camera so that it could see a full 270 degrees around 2 sides of the building.&nbsp;I printed it in ASA for long life and UV protection from the sun. It's mounted up high and I don't want to have to replace it every few years.&nbsp;The mount plate holes are spaced identical to the mounting template hole pattern provided with the camera.51.2mm wide center on center24.1mm high center on center5.0mm hole diameter for a 3/16" stainless bolt or #8 screws

Reolink TrackMix camera corner mount

Security Camera

mother's Day

MatejB

Tablet or phone holder for car backseat. Mounted on front seats headrest.<figure class="media"><div data-oembed-url="https://youtu.be/daxH6tBSDYI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/daxH6tBSDYI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>You can try to print mount for my Toyota headrest dimensions. If it will not fit, you can change it in f3d file in Fusion 360. There go to Modify → Change parameters. Check the photos for parameters descriptions.&nbsp;The mounting dimensions between mount and holders are compatible with <a target="_blank" href="https://www.printables.com/model/449110-universal-tablet-holder-for-carsheadrest-fully-pri" rel="nofollow noopener">this project</a>. So you can combine mounts and holders between these 2 projects.<figure class="image image_resized" style="width:30.15%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433530/design/2024-04-18_c0140bbdf2bb.png"></figure>&nbsp;Included phone and tablet holders with printed spring. Tablet holder is in 2 variants, for clamping of 100-140mm dimensions, and 140-180mm dimensions.&nbsp;Notes:<ul><li>You can print headrest mount with PETG, but based on my experience, in hot summer days the PETG deforms under the load. So you may loose flexible properties. Recommending to print with material with higher temperature resistance than PETG.</li><li>I printed phone/tablet holders from PETG and so far didn&#39;t have any issue.</li><li>Don&#39;t try to configure negative tilt angle in parametric mount. It will work as a positive value. In order to achieve negative tilt, just flip printed part upside down since it is symmetric in this direction.</li><li>After the print, there might be tiny bonds between the sliding and static part. You may need to use some tool to initially push the sliding part. Then sliding has to work fine.</li></ul><figure class="image image_resized" style="width:287.812px;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433530/design/745d8e41-120b-4a8c-a58e-ce08e7a852c7.png"></figure><ul><li>On demand, in the files is available 3mf project for tablet holder for 180_210mm dimension. However this tablet holder was not tested by me, so please keep in mind this. Feel free to share you experience with it.</li></ul>

Parametric tablet/phone holder with printed spring

planter

nweishar

This is a simple and straight forward case for business cards. Fits anything smaller than 90mmx54mm. &nbsp;Hexagon cut outs on the side give it a unique and eye popping design while also making the case more functional to always know how much supply you have left. I hope you enjoy it!

Business Card Case

work

karenchaudesigns

Does your desk come with grommets for cords to pass through? Not happy with how they work or want to customize them to fit your needs? Fill the hole in your desk with your choice of screws and lids, secured underneath by a nut.All required pieces provided, no supports needed.&nbsp;<h3>PROBLEM</h3><figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/422625/2024-01-19_jpw5ponk9vha.jpg"></figure>&nbsp;Sometimes the desk grommets that come with the desks can be finicky – some problems that frustrate me:<ul><li>Pieces don't stay in place (e.g. the rubber piece keeps popping out!)</li><li>Unplugged cords fall through</li><li>Needing to shove cords through because the rubber piece is so small</li></ul>&nbsp;<h3> </h3><h3> </h3>&nbsp;<h3>SOLUTION</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/422625/2024-01-19_429f5md8tx64.jpg"></figure>So with that, I decided to design some pieces of my own so they can be customized to any need. I designed the main part (what I call the “screw”) with threads on the inside so it can have interchangeable screw-on lids that stay in place and are easy to change out based on different needs (e.g. specific cord requirements (quantity/sizes), seasonal decor, personalized designs). &nbsp;I've provided several basic lids and example models for inspiration for you to make ones to fit your needs. See my notes on each model for more info and ideas on how you can use this to personalize your desk!&nbsp;<h3>LEARN MORE</h3><a target="_blank" href="https://www.karenchaudesigns.com/3d/22" rel="nofollow noopener">https://www.karenchaudesigns.com/3d/desk-grommet-system</a>&nbsp;<figure class="image image_resized image-style-align-left" style="width:14.02%;"><img src="https://makerworld.bblmw.com/makerworld/draft/422625/2024-01-19_u3kg9pxnaga1.png"></figure>Like my design? Follow me!Thanks for your support!❤ Karen Chau

Decorative & Functional Desk Grommets

Office

typlatchop

Overload of cuteness with our 2024 calendar!This delightful calendar is designed to bring a smile to your face every day.&nbsp;To assemble the flower:Place the eyes, nose, cheeks, and mouth on the flower's core; you can use glue for this.Place the flower's core on the stem (No glue is required for the flower's core, but you can use some to ensure that stays in place.) and then add the large petals first, followed by the smaller ones. Finally, place the stem on the pot-shaped base! The day numbers can be stored inside the pot to prevent them from getting lost.&nbsp;Two variants are available for download:One with an integrated face and the other without. In the model with a face, you can insert the numbers corresponding to the days into the flower petals.In the version without a face, the number of the day is showcased, taking an elegant central place at the heart of the flower.&nbsp;Mini version was printed in 60% scale&nbsp;Cover picture by @<a target="_blank" href="https://makerworld.com/en/u/1345651541" rel="nofollow noopener">maisonlumiere_3d</a>&nbsp;Follow me :<a target="_blank" href="https://www.instagram.com/typlatchop/" rel="nofollow noopener">https://www.instagram.com/typlatchop/</a><a target="_blank" href="https://www.typlatchop.com/" rel="nofollow noopener">https://www.typlatchop.com/</a>&nbsp;&nbsp;

Flower Calendar

vivian

JamesThePrinter

A rope spirals around to create a small bowl.All of my rope models can be found in collections on <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/12784" rel="nofollow noopener">MakerWorld</a> and <a target="_blank" href="https://www.printables.com/@JamesThePrinter/collections/326850" rel="nofollow noopener">Printables</a>.&nbsp;Print SettingsNo special settings needed&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Polymaker PolyTerra Sapphire Blue</li><li>Polymaker PolyTerra Army Red</li><li>Polymaker PolyTerra Forest Green</li><li>Polymaker PolyTerra Pastel Banana</li></ul>

Rope Bowl

home

Brian Dean

<h2>Embedded Magnet Dispenser Tool for Multiple Diameters and Thicknesses</h2><h3>PROFILE NOTE</h3>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.<h3>Latest Update (2024-04-21): Quick summary</h3><ol><li>additional magnet sizes</li><li>magnet size text embossed on the barrel and also included on the slider</li></ol>See below for the more detailed update notes.<h2>Magnet Dispenser for 3D Prints: Simplify Magnet Insertion with Precision</h2>The Magnet Dispenser Tool is expertly designed to streamline the insertion of magnets into 3D prints. This tool not only speeds the process of inserting magnets into 3D Prints, it also ensures correct orientation and secure fitting, making it ideal for projects that require precise magnet placement.<h3>Key Features</h3><h4>Dual Dispensers for Perfect Alignment</h4><ul><li>Includes two dispensers for each magnet size – one for north-up and one for south-up orientations</li><li>Use different colors (e.g., red for north-up and blue for south-up) to help easily identify the dispenser&#39;s orientation</li><li>Eliminates the hassle of misaligned magnets</li></ul><h4>Design and Utility</h4><ul><li>Developed after extensive refinement</li><li>Allows for friction-fit insertion and is also suitable for magnets that are glued</li><li>Tapered tip facilitates use in tight spaces</li></ul><h4>Ease of Use</h4><ul><li>The dispensers are designed to accommodate the specified magnet sizes for their internal holding magnets, but can dispense magnets of any thicknesses for the specified diameter. For example, for the 6x3mm dispenser, you will need 6x3mm magnets to assemble the dispenser, but once assembled, that dispenser can dispense any 6mm diameter magnet such as 6x1, 6x2, 6x3, 6x5, etc.</li></ul><h4>Convenience and Storage</h4><ul><li>Features a snap-on cap with an embedded magnet and a top slider magnet</li><li>Ensures secure storage and prevents accidental magnet spillage</li></ul><h4>Customization and Printability</h4><ul><li>No supports needed for printing</li><li>STL and STEP files included for personal customization</li><li>Compatible with PETG, PLA, ASA, ABS, etc</li><li>Adjust x/y hole compensation if needed for perfect fit</li></ul><h4>Visual Guide</h4><ul><li>Fusion 360 images provided for easy assembly and understanding of the internal mechanism</li></ul><h4>Use the Magnet Dispenser for a hassle-free, precise, and efficient magnet insertion experience in your 3D printing projects.</h4><h3>Supported Magnet Sizes</h3><h4>Dispensers are now provided for the following magnet sizes as of Version 5</h4><ol><li>2x1mm</li><li>2x2mm</li><li>2x3mm</li><li>3x1mm</li><li>3x2mm</li><li>3x3mm</li><li>4x1mm</li><li>4x2mm</li><li>4x3mm</li><li>5x1mm</li><li>5x2mm</li><li>5x3mm</li><li>6x2mm</li><li>6x3mm</li><li>7x2mm</li><li>7x3mm</li><li>8x2mm</li><li>8x3mm</li><li>8x4mm</li><li>9x2mm</li><li>9x3mm</li><li>10x1mm</li><li>10x2mm</li><li>10x3mm</li><li>12x2mm</li><li>12x3mm</li><li>15x2mm</li><li>15x3mm</li><li>20x2mm</li><li>20x3mm</li></ol>NOTE 1: The 1mm magnet thickesses are just too thin to work reliably with the friction-fit of the slider and caps. Therefore, I have made the pockets of the “1mm” thickness magnet dispensers to be that of the 3mm variety so that they work. So to assemble a 1mm magnet thickness dispenser, you will need to purchase a few 3mm thick magnets to assemble the dispenser. A 2mm thickness will likely work ok, too. Note that the text on the dispenser will still say “D x 1 mm” for the barrel, “Dx1” on the cap, and “D/1” on the slider, so you know what magnets you have loaded into it.&nbsp;NOTE 2: the above are the sizes needed to assemble the dispenser. The dispenser can still dispense any thickness of magnet as long as the diameter is the same. So if don&#39;t see your specific magnet thickness listed above, you can still print the correct diameter, assemble the dispenser with the correct magnet thickness, and dispense other thicknesses.&nbsp;STEP and STL raw files are included if you do not wish to use the provided profile.<h3>Quality Assurance Testing</h3><ul><li>All dispenser sizes have been printed by me and extensively tested</li><li>I have purchased all magnet sizes at significant expense to myself to ensure fit</li><li>Magnet diameters are tricky for press-fit tolerance and controlled by no less that 5 Fusion 360 parameters that must be balanced to achieve good fit<ul><li>Multiple iterations of each dispenser were printed and refined</li><li>Many kilograms of filament and hundreds of hours of print-time were consumed during this process</li><li>All to ensure the best quality printing and fit-up for each dispenser size</li></ul></li></ul><h3>About the Profiles</h3><ol><li>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</li><li>NOTE: The “Designer” profile is a single profile that contains plates for all magnet sizes so far. Please ignore the “total time” reported by MakerWorld for the profile. You only need to print the plate(s) that you need. Each plate takes about 2.5-2.9 hours on my X1C using the included “PETG” profile which is slowed down for good PETG layer adhesion and quality.</li><li>While the other profiles may be ok, their file / update version may be out of date. So if you want the latest sizes and model improvements, please choose the top “Designer” profile.</li></ol><h3>Accessories</h3>Be sure and check out some nice accessories that other folks have created to work with these dispensers.<ul><li>Tip Caps - these are nice caps for the dispensor tip. Not only do they help keep the magnets contained within, but they also protect the tip. Additionally, they are labeled with the magnet size, which is nice. Thank you @onegotowned ! <a target="_blank" href="https://makerworld.com/en/models/149038#profileId-162633" rel="nofollow noopener">https://makerworld.com/en/models/149038#profileId-162633</a></li><li>Vertical Workbench Stand - This is a very nice stand for select diamagers made by @nickramsey57. A number of folks have asked about stands / organizers for the dispensers, so this model will likely be useful to a number of folks. Thank you @nickramsey57 ! <a target="_blank" href="https://makerworld.com/en/models/206388#profileId-226561" rel="nofollow noopener">https://makerworld.com/en/models/206388#profileId-226561</a></li><li>Vertical Workbench Stand (parametric) - Here is another very nice stand made by @RevHazlett. You can specify the dispenser sizes that you want it to hold and then generate, making it customizable to your needs and the common magnet sizes that you use. Thank you @RevHazlett! <a target="_blank" href="https://makerworld.com/en/models/435087#profileId-340031" rel="nofollow noopener">https://makerworld.com/en/models/435087#profileId-340031</a></li></ul><h2>Update History</h2><h3>Version 5: 2024-04-21</h3><ol><li>Emboss the magnet size text on the Barrel (see photos), allowing one to view the size from the side, and also allowing one to print all of the barrels on a single plate and not get the barrels mixed up as to what size they are for.</li><li>Include the magnet size text on the Slider (see photos), allowing one to print all of the sliders and caps together on one plate and not get the sliders mixed up as to what magnet size they are for. Also provides additional text identification of the magnet size within.</li><li>Include 11 new magnet sizes:<ol><li>3x1mm</li><li>4x1mm</li><li>5x1mm</li><li>7x2mm, 7x3mm</li><li>8x4mm</li><li>10x1mm</li><li>15x2mm, 15x3mm</li><li>20x2mm, 20x3mm</li></ol></li><li>Re-organize the plates so that they are a little easier to manage. All dispenser sizes for each “diameter” are spread across three plates now - the Barrels, the Red Caps and Sliders, and the Blue Caps and Sliders. This allows one to “print-by-layer” instead of “print-by-object”, and the text also comes out better. Additionally, it is now easier to construct a plate with all of the size variations on 3 individual plates and print them all at once.</li></ol><h3>Version 4: 2023-12-26</h3><ol><li>Fixed an issue where the smaller diameter magnets such as the 2mm, 3mm, and possibly the 4mm magnet diameters could inadvertently slip through the vertical barrel slider stem slot. Prior to this update, the slider stem was a fixed 3mm + tolerance width. With Version 4, the slider slot is now dynamic based on the magnet diameter. So now, the smaller diameter magnets are captive within the barrel and cannot slip out inadvertently.</li><li>Tighten up the tolerances between the “slider” and the “barrel” for a better fit and smoother operation.</li><li>Use the Profile: “Version 4: All Sizes …” for the latest from this update.</li></ol><h3>Version 3: 2023-12-22</h3><ol><li>Added additional magnet sizes<ol><li>2x1mm, 2x2mm, 2x3mm</li><li>9x2mm, 9x3mm</li></ol></li><li>Text is now added within the Fusion 360 Model File, eliminating the need to add the text using Bambu Studio<ol><li>Ensures consistent text placement and easier colorizing of the text</li></ol></li><li>All plates are included for all magnet sizes, two dispensers per plate, print sequence: print-by-object</li></ol><h3>Version 2.1: 2023-11-28</h3><ol><li>Added additional magnet sizes<ol><li>3x2mm</li><li>4x2mm, 4x3mm</li><li>5x2mm, 5x3mm</li><li>6x2mm</li><li>8x2mm, 8x3mm</li><li>10x2mm, 10x3mm</li><li>12x2mm</li></ol></li><li>The magnet size text is included on the cap for easy identification - see photo</li></ol><h3>Version 2: 2023-11-20</h3>Updated to “Version 2”. Significant updates an enhancements have been made, some seen, some unseen.<ol><li>Added additional magnet sizes<ol><li>3x3mm</li><li>12x3mm</li></ol></li><li>Each magnet size is on its own plate, two dispensers per plate, print sequence: print-by-object</li><li>Redesigned “thumb slider” for greater comfort and stronger press force</li><li>Slider stem has been reinforced</li><li>Many enhancements for smoother operation with internal chamfers and fillets, enhanced tolerances, and strengthening of key internal components</li></ol>&nbsp;&nbsp;&nbsp;

Embedded Magnet Dispenser Tool for 3D Prints

tools

mcmaven

This is a 3D-printed model of a triple-axis tourbillon, which is based on the tourbillon in a Jacob and Co. Twin Turbo Furious watch. A tourbillon is a mechanism employed to counteract the effects of gravity within a watch. This intricate model includes an escape wheel, triple-axis outer frame, and a base with an integrated motor. It functions on the same fundamental principles as a traditional watch tourbillon.&nbsp;With precise assembly and calibration of the escape wheel, spring, and base drive gear, this tourbillon can smoothly rotate in three axes and maintain accurate timekeeping. The provided print settings in the Triple-axis Tourbillon Model for Kit-007.3mf file are already customized to ensure that all screw holes are clear and ready for assembly.&nbsp;Printed plastic ‘screws’ are printed to scale and used as caps to cover the steel screws that actually hold it together.<a target="_blank" href="https://youtu.be/2-7S2i6AUyM" rel="nofollow noopener">Here </a>is a real-time video of the tourbillion in action.&nbsp;Note: There are two different designs defined for the Tourbillon: the 3MF version and the STL version.&nbsp;The 3MF (Triple-axis Tourbillon Model for Kit-007.3mf file) version was designed specifically to work with Bambu printers and the Bambu slicer, and uses the Triple-axis Tourbillon Model Hardware Kit motor to drive it. It is a slightly modified version of the original STL tourbillon version. To build the 3MF version you only need to order the <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a>, which provides all the non-printed parts (screws, bearings, shafts cut to length, motor, etc.) needed to build a complete model. <a target="_blank" href="https://www.youtube.com/watch?v=HRNbihDXNwE" rel="nofollow noopener">Here </a>is a video of assembling the 3MF version with the Bambu 007 hardware kit. Note that some of the sections in the Furious Build Notes PDF file below also apply to assembling the 3MF version, with the primary difference being the construction and components of the Base and the drive mechanism.&nbsp;The STL (Raw Model Files) version is a set od files that was designed to work with any printer or slicer. It also uses a more complex Arduino controlled stepper motor mechanism to drive it. To build the STL version you can order a kit of all the non-printed parts <a target="_blank" href="https://www.makerrx.com/collections/projectkits/products/twin-turbo-furious-tourbillon-kit" rel="nofollow noopener">here</a>, otherwise you will need to order the parts listed in the Furious Build Notes PDF instructions individually. If you order the STL version of the hardware kit or buy the parts yourself, you will need to program the firmware into the Arduino before it will work. The Furious Build Notes PDF file below, describes the assembly process for the STL version. For some of the larger parts, ‘full’ (e.g., Base Outer Ring.STL) and ‘split’ versions (Base Outer Ring a.STL and Base Outer Ring b.STL) of the same part are included. The ‘full’ parts require at least a 220x220 bed for printing. The ‘split’ parts may be printed separately on a diagonal on a smaller bed, then glued together to form the larger part.&nbsp;The following filaments can be used to create a model that looks like the pictured gold, silver, copper and black version:<ul><li><a target="_blank" href="https://shrsl.com/4cim5" rel="nofollow noopener">PLA Silk Gold</a></li><li><a target="_blank" href="https://shrsl.com/4cim4" rel="nofollow noopener">PLA Silk Silver</a></li><li><a target="_blank" href="https://shrsl.com/4cim3" rel="nofollow noopener">PLA Silk Copper</a></li><li><a target="_blank" href="https://shrsl.com/4cim2" rel="nofollow noopener">PLA Basic Black</a></li></ul>Here is a video of the construction of the 007 kit. And some sections in the Furious Build Notes.PDF file may be useful for constructing the 007 kit.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=bHEU9rnnu88"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/bHEU9rnnu88" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Triple-axis Tourbillon Model Components Kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;The Hardware Kit for the Triple-axis Tourbillon Model for Kit-007.3mf file can be found here: <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a><a target="_blank" href="https://shrsl.com/4cfzj" rel="nofollow noopener">.</a>

TT Furious Tourbillon

kits

Kevbot.

This one will definitely be a fan favorite with kids and adults! I wanted to create a grenade toy that exploded when it hit something. After a lot of thought, I decided to design it using magnets (16 in total).&nbsp;I first created the grenade, and then I broke it into pieces like a puzzle. After that, I added the holes for the magnets, and now we have a functioning toy grenade! It is quite fun to use, and I&#39;m excited for you to try it out! Keep in mind that it&#39;s very easy to lose the pieces because they go flying everywhere, but its worth it lol.&nbsp;I made five files that make up the grenade. The bottom section, middle piece, top section, handle, and pin.I didn&#39;t put all of them on the same build plate to make keeping track of the magnets direction (polarity) easier.&nbsp;This model is for PERSONAL USE ONLY, if you want a commercial license and access to more awesome models you can get it on my patreon <a target="_blank" href="https://www.patreon.com/kevbot_3d" rel="nofollow noopener">https://www.patreon.com/kevbot_3d</a>&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/FOG56Bdk3ck"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=FOG56Bdk3ck"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/FOG56Bdk3ck" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;Print Setting:&nbsp;I recommend printing the bottom pieces first, then moving to the middle piece, then the top pieces, followed by the handle and the pin. I will have 3MF files for each piece with all the settings I used to print them (including the stops needed to embed the magnets into the print).I recommend 30% infill or less. If you do more infill, the magnets might not be strong enough to stick to each other.You will need 16, 6 by 3mm Neodymium Magnets. These are the magnets I use if you are interested:&nbsp;60 Pack on Amazon: <a target="_blank" href="https://amzn.to/47pQFaj" rel="nofollow noopener">https://amzn.to/47pQFaj</a>100 Pack on Amazon: <a target="_blank" href="https://amzn.to/3Sa8beg" rel="nofollow noopener">https://amzn.to/3Sa8beg</a>&nbsp;If you don&#39;t know how to orientate the magnets please message me and I will put a video together if needed.You can also purchase key rings to attach to the pins here:<a target="_blank" href="https://amzn.to/3tSN6f4" rel="nofollow noopener">https://amzn.to/3tSN6f4</a> &nbsp;ScalabilityI would not scale it up but you might be able to scale it down a little bit.&nbsp;Supports Needed?No&nbsp;Thank you for the support! More designs are on the way and if this design is a hit, I will most likely make some variations.Happy Printing!Cheers,Kevin&nbsp;Disclaimer: Some links in this description may be affiliate links. This means I may earn a small commission if you click them and make a purchase. It&#39;s no extra cost to you, but it truly helps me to keep producing free designs. Thank you!

Toy Exploding Grenade!

toys

GlennovitS 3D

UPDATE 13. Dec 2023 - Added 12 more sizes! (same lengths, but with a bigger or smaller lid/opening - size 30 and 50. Size 40 is the original) Enjoy!&nbsp;With this simple little print, you can make your bags a lot easier to use in the kitchen! It’s easy to open, pour and close again. Just print and mount on the bag and you are ready to go! No extra hardware needed - all 3D printed. Ready within an hour - almost no reason not to try this ;-)<h2>Overview</h2>The model comes in 18 sizes for now! It's based on the diameter of the lid/opening and the length of the clip. The diameter comes in 3 sizes:<ul><li>30 mm</li><li>40 mm</li><li>50 mm</li></ul>All lengths of the clips in a particular diameter size, uses the same Cylinder and Lid.The clip comes in 6 lengths (currently from XS to XXL). The total length of the different sizes is approx.:<ul><li>XS: 55, 65, 75 mm (depending on the diameter of the lid/openening)</li><li>S: 90 mm</li><li>M: 120 mm</li><li>L: 150 mm</li><li>XL: 180 mm</li><li>XXL: 210 mm</li></ul>For your information, the sizes used on the images are:<ul><li>Pink: 40 - XS</li><li>Yellow: 40 - XL</li><li>Blue: 30 - XS</li></ul>If you have a request for more sizes or other ideas that would make this clip even better, please leave a comment and I’ll get back to you!<figure class="image image_resized image-style-side" style="width:40.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/450294/2023-12-11_bc82b2a49eaeb.gif"></figure><h2>Assembly</h2><ol><li>Cut a hole in the bag (fx. a hole in the corner just big enough to fit the cylinder)</li><li>Hold the Cylinder in the hole with the thread sticking out.</li><li>Mount the Clip around the bag and Cylinder base</li><li>Screw the Lid on</li></ol><h2>Print instructions</h2>It prints easy and can print with default values. There are some tips though to make it better.<ul><li>Supports: No - the print-in-place hinge prints without supports!</li><li>Walls/perimeters: 3-5 - the more walls, the stronger but more filament is used - so test a see what you find the best.</li><li>Infill: The more infil, the stronger it will be. Mostly needed on the longer Clip versions.</li></ul>&nbsp;Happy printing!&nbsp;<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>

Ultimate Bag Clip (with Lid - easy access!)

Kitchen

Bamingo Design

<ul><li>❄ 🌨️ Is your table missing that special seasonal sparkle? Unique snowflakes for your table, each coaster an intricate art of frost.</li></ul>Snowflake Coasters: Unique Seasonal Sparkle<ul><li>🎨 Frosty Design: Each Snowflake Coaster is a unique representation of frost&#39;s delicate art, capturing the unique beauty of snowflakes. Their intricate patterns are designed to bring a touch of winter&#39;s magic to your table.</li><li>👶 Easy to Print: No need for (AMS) or (MMU). Only two manual filament swaps are needed to complete the model.</li></ul>Technical Specifications:<ul><li>📏 Size:<ul><li>10 cm</li></ul></li><li>🔧 Print Settings:<ul><li>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</li></ul></li><li>🌈 Color Changes:<ul><li>Start with Blue</li><li>At layer #19 (1.6mm), swap to Light Blue</li><li>At layer #25 (2.08mm), swap to White for the rest.</li></ul></li><li>📋 Assembly and Usage Tips:<ul><li>Alternatively, use our ready-to-print 3MF file—it automates these steps.</li><li>The files are available in STL, Prusa 3MF, and Bambu Lab 3MF file formats.</li></ul></li></ul>Explore More Designs:<ul><li>Dive deeper into our collection of nature-inspired coasters for more designs that capture the beauty of the natural world:<ul><li>🌊 <a target="_blank" href="https://makerworld.com/en/models/25169#profileId-21943" rel="nofollow noopener">Wave Coasters</a></li><li>🗼 <a target="_blank" href="https://makerworld.com/en/models/251129#profileId-267476" rel="nofollow noopener">City Coasters</a></li><li>⛰️ <a target="_blank" href="https://makerworld.com/en/models/30652#profileId-27193" rel="nofollow noopener">Mountain Coasters</a></li></ul></li></ul>Licensing Information:<ul><li>These designs are for personal use only. To access them for commercial purposes and enjoy exclusive benefits, consider joining our Memberships. <a target="_blank" href="https://www.printables.com/@BamingoDesign#join:397" rel="nofollow noopener">Printables Memberships</a></li></ul>Stay Connected:<ul><li>Be the first to know about our newest designs by following us on Twitter and Instagram. Find all our social media links and more at <a target="_blank" href="http://bamingodesign.com/" rel="nofollow noopener">bamingodesign.com</a>.</li><li>We&#39;re excited to see your creations! Tag us when sharing photos of your prints and connect with us. Your feedback and requests are always welcome. 💙</li></ul>