moments.fpv

T3rryX

This is a system of hexagonal shelves i designed from the ground up. The shelves are 250mm wide point to point and i provided various depths, 150mm, 125mm, 100mm and 75mm. Also included drawer/inserts for them, as well as a drawer knob/handle and some clips to attach the pieces together.&nbsp;The shelves are a single piece print with some gussetts in the corners which also have holes to use screws to hang on a wall, or to use the provided connector pieces.&nbsp;The connector pieces are made to be press fit, but i also added a hole through the center of the pegs so you can drill it out easily to add screws, this should allow you to either screw from the front to secure the boxes, or screw from the back and create more of a pressure fit by having the screw expand the plastic peg. I included 3 connectors, one for a 3 way intersection, one for a 2 way and a single, just to make for consistent spacing off the wall if you decide to use the connector and fasten to the wall with screws,&nbsp;The drawers are a 3 piece design, the face and sides are one piece and the back is a separate piece with designed alignment pegs, the pegs are press fit but they are very small so i would suggest using them for alignment and then adding glue for strength. The drawer knob is held on with a M3 screw which is force threaded in to the knob to cut threads, the M3 screw can be anywhere from 8mm to 15mm, obviously the longer screw will get more engagment and be more secure, but dont go longer than 15mm or you risk punching through the face of the knob.&nbsp;There's also an included “clip” i am not a fan of it, but it would work alright for a temporary setup which do not utilize drawers.&nbsp;&nbsp;As mentioned, there are 4 different depth shelves and drawers, they're all labelled on the plate and on the object, the drawer back and knob is the same for all drawer depths, so you can rearrange things and print whatever's needed for your particular setup.&nbsp;&nbsp;EDIT ADDED: mini shelves, the big ones were too big for some things, so i have added mini shlelves which fits 7 inside the main shelf, i have only done the 150mm version so far because that's what i made for personal use, i added a second profile for the mini shelves/drawers.The mini container and mini container stand is just if you want to print the minis without the main shelf, you can still somewhat hold them together and have them stable.&nbsp;

Hex Shelf System 250mm - various depths

Organize

B-Lab 3D

Finalmente ho trovato il modo per mettere in ordine le bobine ed averle a portata di mano. Per la stampa uso filamenti che sono li da tempo e che non mi servono più.Il bello di questo progetto è che non servono attrezzi, colle o altro per completare, devi solo incastrare i pezzi stampati.Su questo rack puoi mettere bobine da 1 KG o da 250 GR, non ho bobine da 2 KG quindi se ne hai e ci stanno fammelo sapere :) In questo momento sto aggiungendo il terzo piano in altezza e tutto è stabile! Ho lasciato anche i disegni <a target="_blank" href="https://www.autodesk.it/products/fusion-360/overview?term=1-YEAR&tab=subscription" rel="nofollow noopener">Fusion 360</a> per poter modificare come ti pare partendo da zero in base alle tue esigenze.Se sei neofita, o hai una stampante “economica” e usi filamenti di scarsa qualità potresti riscontrare problemi di tolleranza degli incastri. Ti consiglio di provare a fare un pezzo e se non va bene modificare il DXF dopo aver misurato con un calibro digitale i pezzi di prova.Guarda il video in descrizione per vedere come è facile incastrare il tuo nuovo rack. Buona stampa a tutti !!!<h2>Bambu Lab spools winder SIMPLIFIED: <a target="_blank" href="https://makerworld.com/it/models/17838#profileId-16584" rel="nofollow noopener">Bambu Lab spools winder SIMPLIFIED ! by B-Lab 3D - MakerWorld</a></h2><h2>consider this new project <a target="_blank" href="https://makerworld.com/en/models/210974#profileId-230802" rel="nofollow noopener">AMS Lite Spool Winder by B-Lab 3D - MakerWorld</a></h2><a target="_blank" href="https://www.youtube.com/watch?v=sffmO5EWOyg" rel="nofollow noopener">Filament Spool Rack - YouTube</a><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=sffmO5EWOyg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/sffmO5EWOyg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Spools Desk Rack Modular

Drucker

the_bearded_jedi

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA Overture Matte Black Transmission Distance: 0.1 PLA PolyTerra Earth Brown Transmission Distance: 0.3 PLA Paramount 3D British Racing Green Transmission Distance: 3 PLA Paramount 3D Iron Red Transmission Distance: 3 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA Overture Matte White Transmission Distance: 3.7 This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Earth Brown At layer #9 (0.8mm) swap to British Racing Green At layer #11 (0.96mm) swap to Iron Red At layer #15 (1.28mm) swap to Sunrise Orange At layer #18 (1.52mm) swap to Savannah Yellow At layer #20 (1.68mm) swap to White for the rest.&nbsp;If you would like my work and interested in donating to the filament fund, or would want to have something special made, feel free to drop a donation or join my patreon for early access and request priority prints.https://www.patreon.com/sblayeredcreations

Eagle Hueforge

Spirit

hlrcreations

Print at 100% infill and 2 walls with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: Bambu Basic black Transmission Distance: 0.6 Bambu Basic simble green Transmission Distance: 8 Bambu Matt Dark Brown Transmission Distance: 2 Bambu Basic Jade White Transmission Distance: 4 Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Green At layer #13 (1.12mm) swap to Brown At layer #16 (1.36mm) swap to White &nbsp;

Organize

Drucker

Spirit

Gift