modular

Wcad00

Update december 1st<ul><li>the chair is modified with a larger magnet hole </li><li>the missiles from the underside launcher are a little smaller</li><li>the back gun now has an aligment to make it easier to fit</li><li>updated the assembly pdf with the underside launcher and cockpit assembly</li></ul>&nbsp;&nbsp;This is my take on a batwing. its 100% my design and a real labor of love for me. assembly is pretty strait forward.the model is almost 80 cm across so be mindful of that. also attached an assembly guide, not the best, but like i said, it shoud be pretty straight forward..all pieces printed perfectly and require no sanding.Hope you enjoy this model and whom ever decides to take on this print please feel free to contact me for anything.its all printed in BL matt charcoal PLA, and i have to say it turned out gorgeousAlso it is split so that all plates print in 1-2 hours, so it minimises the printers usage; there are two exceptions on the large parts of the wings but that is it.&nbsp;Also photos are available athttps://s.go.ro/vs3zltii | password: 230926there are over 60 so i couldnt upload them here.Next few days i will upload better quality photos of the entire plane&nbsp;I also have a project for a batman beyond style vehicle, it will be proportional to this one. so stay tuned if you like my overall aesthetic .

Batwing

Figuren/Modellbau

K2_Kevin

Multiboard MultiBoom Arm - Boom Arm BOOM! There it is! Another functional part for your Multiboard - a boom arm that can connect your phones, cameras, mic, or other multiboard accessories at multiple angles!All arms can accept Multiboard Bolts, Snaps, Threads, Hooks, shelves etc. Piece this thing together in hundreds of combinations. Cant wait to see what you can do with this!&nbsp;Included Boom PartsMounting to Multiboard:<ul><li>MultiBOOM_Mount-A_Wall_T-BOLT_STRONG.stl - Print w/Supports</li><li>MultiBOOM_Mount-A_Wall.stl - Optional Push Mount (not recommended)</li><li>9 mm Small Thread, Flat Head, T-Bolt.stl</li><li>MultiBOOM_Mount-B_Swivel.stl</li><li>MultiBOOM_Mount-C_Pin.stl</li></ul>Boom Arms:<ul><li>MultiBOOM_Arm_Female_80mm.stl</li><li>MultiBOOM_Arm_Female_100mm.stl</li><li>MultiBOOM_Arm_Female_150mm.stl</li><li>MultiBOOM_Arm_Male_100mm.stl</li><li>MultiBOOM_Arm_Male-Female_100mm.stl</li><li>MultiBOOM_Arm_Male-Female_150mm.stl</li><li>MultiBOOM_Nuts.stl - Used all over your Boom to attach Arms</li><li>MultiBOOM_Mount-A_InLine-Swivel.stl</li><li>and more…</li></ul><a target="_blank" href="https://makerworld.com/en/@K2_Kevin" rel="nofollow noopener">Check my profile for more MultiBoom Accessories!</a>&nbsp;

MultiBoom Arm Kit - Multiboard Boom Arm Kit

Multiboard

squinn

A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand.  This is a fully printable design, so no other hardware is required.  The clamping mechanism can be adjusted to accommodate boards up to 20 cm in length, and can be installed facing either direction.&nbsp;All STLs are oriented as they should be for optimum printing, which have been designed with the layer lines in mind to result in a strong print (and no supports or brim should be required).

Adjustable PCB Holder Tool

Lötzinn 

Galactic Armory

Make your own Galactic Armory themed Spartan helmet!&nbsp;Based off concept art from GC_ConceptArt, this is an envisioning of the classic Galactic Armory logo with a Halo Spartan helmet!&nbsp;The faceplate is able to be removed with the help of 10mm x 3mm circular magnets!&nbsp;Includes both assembled and pre-separated versions for easy printing.&nbsp;Use the visor cutout template to trace an outline on your visor material. Then slot the cut out shape into the pre-modeled ridges on the inside of the helmet!&nbsp;You'll also find the large parts have been pre-cut for smaller printers.&nbsp;If you would like to use these files for commercial use, please subscribe to the "Specialist" tier of my Patreon here: https://patreon.com/galacticarmory

Galactic Armory Spartan Helmet

Cosplay

Carman3D

Functional 3D Printed Mill&nbsp;Purchased components are listed below, these are McMaster-Carr part numbers with the exception of the router which I purchased on Amazon. You could definitely source cheaper hardware, but the bolts that are labeled (Fully Threaded) need to be. The router is just a cheap one so you may want a better router, or already have one. I included a step file of that part so that you can modify to fit another router.&nbsp;When assembling I would recommend tapping the ½-13 holes if you have a tap, I was able to assemble without it, but it took some working back and forth to make it smooth, and WD-40 can help as well. The second one I built I tapped the holes after printing and it made it a lot easier.&nbsp;½-13 Hex Head Bolts&nbsp;(2) 92800A407 - 10” Long (Fully Threaded)(10) 92240A715 - 1-1/2” Long (Comes in 10 pack)(1) 92800A408 - 12” Long (Fully Threaded)(1) 92240A740 - 8” Long (Fully Threaded)(1) 92240A728 - 4” Long (Fully Threaded)(4) 92240A710 – ¾” Long (Comes in 10 pack)&nbsp;3/8-16 Hex Head Bolts&nbsp;(4) 92240A622 – ¾” Long (Comes in 25 pack)&nbsp;1/2-13 Socket Head Cap Screw&nbsp;(1) 91251A722 - 2-1/2” Long (Comes in 10 pack)&nbsp;Set Screw Shaft Collar&nbsp;(3) 9414T11&nbsp;Routerhttps://www.amazon.com/dp/B094VSC1GT?ref=ppx_yo2ov_dt_b_product_details&th=1

Functional Vertical Milling Machine

Tools

BENOengineering

Mountable organisers for all types of WAGO 221 wire connectors (1x-2x-3x-5x) in different patterns.The connectors are slightly angled, so the connecting of the wires is more convenient and allows to position the connectors in a vertical pattern as well.

WAGO 221 modular mount & organiser - for all types

Electric Stuff

briancmoses

I use the <a href="https://www.ikea.com/us/en/p/helmer-drawer-unit-on-casters-white-10251045/" rel="nofollow">IKEA Helmer</a> for the storage of all my excess quadcopter parts.I recently assembled a fourth Helmer to hold more equipment and give me some more surface area up top for my battery-charging and bumped into my 3D printer cart when I reached for the labels that were included with the Helmer.That caused a lightbulb to go off in my head. Why sloppily write a bunch of labels when I could 3D Design and print my own?*Helmer Label -- Plateful.scad: This can be used to create a larger number of labels, I found it easier than creating 24 unique STLs to feed to my printer. If you're familiar with OpenSCAD, editing it should be fairly straightforward and I suggest that you go that route!_ *Helmer Label -- Inverse Single.scad: This is the .SCAD file for my first prototype (the red one in the photo). I'd originally wanted to just use empty space and allow the color of my Helmer (white) to show through. However, I couldn't find a good stencil font and as a result, the inner bits of some letters (example: e, A, b, etc...) wound up getting left on the plate. For this to work well, you'll need to find some sort of stencil font to use instead of the Impact font that I'm using. I didn't like how this turned out, but I'm adding it based on a request!<h3> Print Settings</h3>Printer Brand:PrusaPrinter: <div>i3 MK3</div>Rafts:NoSupports: <div>No</div>Resolution:0.20Infill: <div>15%</div> Filament: 3DFuel PLA White and BlackCategory: Organization

Label for IKEA Helmer Drawers

IKEA

Speedy 3d

This is an excellent way to organize parts, screws, and tools. It can be printed thicker as it is used for craft and takedowns. You may insert the new tray design for contrast of color and a replaceable work surface. Print this surface so the PEI steel texture shows!

V1 Tool & Tech Organizer Work Mat  (TPU Insert)

Bastelzubehör

mikolaj.mazik

I'm a student. If you like my work, please consider leaving a small donation, it will help me create more and more interesting models!<a target="_blank" href="https://ko-fi.com/mikolajmazik" rel="nofollow noopener">https://ko-fi.com/mikolajmazik</a>&nbsp;Hello, today I present to you a model of the Peterbilt 379 which is an American Semi Truck . It has movable wheels. This is the first prototype, prepared for gluing with plastic glue, subsequent versions will have versions with screw holes and movable front wheels. A remote-controlled version will appear in the future. Not all tolerances may be correct.Feel free to scale it up or down, if so, you may need to use toothpicks or something like that as an axis.

Peterbilt 379- American Semi Truck- Fully 3D printable model (Ford, Volvo, Man, Mack, Kenworth)

Toys

3D servis

The stand is able to tilt according to your needsEasy print without supports nor glueTested with PLA and PETG&nbsp;If you have problem with print of worm, you can print profile worm - 2 parts.  It's without glue, only connect together with nuts&nbsp;Added bottom part with lower “horns”<img src="https://media.printables.com/media/prints/734305/rich_content/d1cc0fb7-688a-4ff4-a083-0ce6453751c8/thumbs/cover/800x488/png/snimek-obrazovky-2024-02-21-v-155507.webp">&nbsp;Upload new version for ipad (tablet) <a target="_blank" href="https://makerworld.com/en/models/216325" rel="nofollow noopener">https://makerworld.com/en/models/216325</a><img src="https://makerworld.bblmw.com/makerworld/draft/615791/2024-03-01_48bd1d4c76084.jpeg">&nbsp;

Adjustable phone stand

Nice Stuff

JamesRagnar

A collection of Gridfinity bins, from 1x1x1 to 3x3x3. Each bin is placed on a dedicated print plate for easy selection and printing.&nbsp;Print profiles for X1/P1/A1 machines have been provided as well as a dedicated A1 Mini profile.&nbsp;All individual STEP files have been included in the Raw Models, as well as the FreeCAD project used to create them. The project can be used to generate custom size bins, as well as “blank” bins which can be used to create custom Gridfinity boxes.&nbsp;Update 2024/02/06: Added an inner cut to the walls below the first profile lip, reducing the amount of filament required per box.&nbsp;---&nbsp;Baseplate collection here: <a target="_blank" href="https://makerworld.com/en/models/149241" rel="nofollow noopener">https://makerworld.com/en/models/149241</a>FreeCAD Generator Project: <a target="_blank" href="https://github.com/JamesRagnar/FreeCAD-Gridfinity-Generator" rel="nofollow noopener">https://github.com/JamesRagnar/FreeCAD-Gridfinity-Generator</a>&nbsp;

Gridfinity Container Collection + FreeCAD Generator

Gridfinity

SavageLau

&nbsp;This simple tool is fast to print, and cost very little filaments, 1.95g each.This tool will help you lube on the z and y axis (lead screw and linear rod).Extended length handle will help you easy to reach center one that within the cover.You can control the angle to push how much lube apply to the screw.<figure class="image image_resized" style="width:78.49%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_10731b083ab3.gif"></figure>&nbsp;<h3>Leadscrew:</h3><figure class="image image_resized" style="width:77.49%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_047b690a0cf77.jpg"></figure><figure class="image image_resized" style="width:77%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_0136c09e64bc8.jpg"></figure><h3>Linear rods:</h3><figure class="image image_resized" style="width:76.74%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_25301222a7901.jpg"></figure><figure class="image image_resized" style="width:76.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368109/2023-12-19_6dbff3848e74c.jpg"></figure>

P & X Series Lube helper

Bambuzzle

Nico91

<h2>Star Wars Logo Lithophane Lightbox.</h2><h2>New version with Color Litho under Raw model files.</h2><h2>Please use my print profile. Otherwise, the model does not have any holes for an LED cable to pass through.</h2><h2>Lightbox size is 240x106.</h2><h2>100% Infill and 0.1mm Layer for the Litho.</h2><h2>I used 1 meter of led wire fairy lights. It is a little more difficult to mount the LED strip. But with a little patience it works :)</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/826394/2024-01-31_131530559a15c8.jpg"></figure>

Star Wars inspired Lithophane Lightbox LED Lamp 

Beleuchtung

3D Print Masters Hub

Storage Bin Set with BasketAdded LIDs, small, medium large-Choose bin size small, medium, large and arrange basket to your liking.-Great for organizing misc hardware parts, batteries, screws, clips and more!-Easy print.-Scale down as needed.-Please like and subscribe! More to come!-See bio for more exclusive print project ideas.🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥

Storage Bin Set with Basket

Storage

giamma933

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Matte Scarlet Red Transmission Distance: 2PLA BambuLab Basic blue silk Transmission Distance: 3.5PLA BambuLab Basic Jade White Transmission Distance: 4&nbsp;Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Scarlet RedAt layer #12 (1.04mm) swap to blue silAt layer #20 (1.68mm) swap to Jade White for the rest.&nbsp;

Spiderman hueforge painted final 

Hueforge

KYZ Design

Dry up to 7 spool desiccant canisters at once in a filament dryer!&nbsp;<ul><li>Print in ASA, ABS or PETG to prevent the part sagging upon heating.</li><li>You will need two pieces of the same. There are finding features that align the two pieces, and one central desiccant holder will lock them together.</li><li>The external dimensions of this is based on a Bambu reusable spool and will fit in the AMS as well as all filament dryers (that I know of).</li><li>If you are buying indicating silica gel beads, the orange beads are the non-toxic ones and the blue ones are the toxic ones.</li><li>Leave an air gap in your filament dryer to let the moist air out when drying.</li></ul>Please feel free to upload print profiles for any of my uploads - for various printers, materials, etc.&nbsp;The desiccant PACKET holder I use in the pictures is <a target="_blank" href="https://makerworld.com/en/models/72591" rel="nofollow noopener">here</a>. This has a fine thread so they clamp the Bambu spools quite tightly - making “spool shims" unnecessary when refilling your spools.  <figure class="image image_resized" style="width:78.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/724478/2023-11-29_15419d570f1c88.png"></figure>&nbsp;The desiccant loose bead holder I use is <a target="_blank" href="https://makerworld.com/en/models/23470" rel="nofollow noopener">here</a>. Note that this remix has holes on the sides of the tube (among other changes) to make drying easier when they are outside of the filament spools - this is the primary reason I made the remix - to make drying easier.<figure class="image image_resized" style="width:78.66%;"><img src="https://makerworld.bblmw.com/makerworld/draft/724478/2023-11-29_256f89d3ca1f.png"></figure>If you want a loose bead holder specifically for Bambu spools, check out <a target="_blank" href="https://makerworld.com/models/179426" rel="nofollow noopener">this one</a>:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/724478/2024-03-18_e9981deb76fe38.jpeg"></figure>&nbsp;That is all, happy printing!