modrosonce

Rsixkg

I bought one for my cat poops then i realize how stupidly was designed. Thats why i draw one that will do the job better it was designet for silica gel litter.

Shovel for cat litter

za mačko

alessiopellerito90

universal umbrella hanger.printing in abs or asa. in the photo l didn&#39;t add the brim because l use the dimafix, instead in the print profile l inserted the brim to facilitate adhesion with the plate.

universal umbrella hanger.

razni nastavki za rabo

Enique3d

bucket and spad, with 3d printed sand castle and pile of sand.&nbsp;the sand castle fits nicely in the bucket so you can tip it out and pretend youve made a sand castle.&nbsp;gimic aside the bucket and spade are fully working.&nbsp;clip the handle on the bucket, it is a tight fit on purpose. if you are struggling just run a knife or deburing tool round.&nbsp;the sand pile clips nicely into the spade.&nbsp;the spade does print in 2 parts and clips together. feel free to use some glue. but is a fairly study spade.&nbsp;of course you dont need to print the sand castle or sand pile at all and just use the bucket and spade.&nbsp;if you do wish to print the sand castle, while it is textured you can also add “guzzy skin” in settings to to increase texture.&nbsp;lastly i have used sand colour filament from 123-3D&nbsp;&nbsp;

Bucket and spade with sand castle

za na plažo

3DJupp

Remix of the model on printables by rubensilzer. Use a spare 1.75mm filament piece for the hinge.

Box for wedding rings (two rings, hinge: 1.75mm filament piece)

darilne škatlice

JamesThePrinter

This scoop was designed for pet food, but it can be used for scooping almost anything. Volume: Approx. 2.5 cups (600ml)&nbsp;Print SettingsNo special settings required&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Galaxy Purple PLA</li><li>Bambu Lab Galaxy Nebulae PLA</li></ul>

Pet Food Scoop

posode za svašta 

Mythmarco

Parametric Coffee Mug Handle - 3D Innovators StudioI’m excited to share my latest parametric design: a customizable coffee mug handle! This model features adjustable parameters that you can modify according to your specific needs. Here’s a comprehensive guide on how to use and print this design.Design Guide:Measure the Outside of Your Mug:<ul><li>This measurement will be considered the Inner Diameter parameter of the handle.</li><li>Ensure you measure the widest part of your mug to get an accurate fit.</li></ul>Thickness:<ul><li>This is how thick the ring around the mug will be.</li><li>Recommendation: 7mm for a sturdy and comfortable grip.</li></ul>Height:<ul><li>This is how tall the ring around the mug will be.</li><li>Recommendation: 15mm to ensure a secure fit and stability.</li></ul>Handle Length:<ul><li>This is how long the handle will be.</li><li>Recommendation: 38mm as shown in the pictures for a balanced and ergonomic handle.</li></ul>Grip Height:<ul><li>This is the grip size of the handle.</li><li>Recommendation: 105mm for the black handle shown in the pictures and 95mm for the shorter pink handle.</li></ul>Printing Instructions:<ul><li>Material: PLA</li><li>Supports: None</li><li>Brim: None</li><li>Infill: 30% or higher for strength</li><li>Layer Height: 0.2 mm for a balance of speed and detail</li></ul>Additional Tips:<ul><li>The design prints quickly, making it easy to create multiple handles for different mugs.</li><li>Ensure proper adhesion to the print bed to avoid warping or detachment during printing, I recommend hair spray its what I have been using and it works great, easy to clean and reuse if clean by a alcohol damped cloth.</li></ul>Enjoy Your Custom Coffee Mug Handle!This parametric design allows for easy customization to fit any mug perfectly. Download the model, adjust the parameters to suit your needs, and enjoy a more comfortable coffee experience with your personalized mug handle. Happy printing!

Mug-Handle - 3D Innovators Studio

skodelice

ivorbaba

y-splitter for vent/duct for laser cutter, dryer, hvac

4" duct y-adapter splitter. 30 degree angle split

y razdelilec cevi

CiRcLe

Playstation door handle - Do not disturb

Playstation door handle - Do not disturb 

paolobonidesign

Introducing BeeSmokKey, the ultimate keychain for beekeeping enthusiasts! This unique, novelty keychain is designed to resemble a miniature bee smoker, making it a playful and practical accessory for your keys. It's not only a great conversation starter but also a charming way to show your love for bees. Whether you're a professional beekeeper or simply a bee admirer, the BeeSmokKey is the perfect little addition to your daily essentials. Lightweight and durable, it's crafted to last and makes a fantastic gift for friends and family who are fascinated by the buzzing world of bees. Add a touch of whimsy to your day with BeeSmokKey!

BeeSmokKey - A whimsical keychain designed as a mini bee smoker, perfect for beekeeping enthusiasts

za čebelarje

remi.rafael

<div><h1>Summary</h1><div>This collection regroups the models of handles for nuts and screws i designed over time. All designs can be printed without support, refer to the illustration to identify the different types.Edit: Bigger sizes are now available here: <a href="https://www.printables.com/model/455708-handles-for-m7-to-m12-bolts-and-screws" rel="nofollow">https://www.printables.com/model/455708-handles-for-m7-to-m12-bolts-and-screws</a> or here: <a href="/thing:5975322" rel="nofollow">https://www.thingiverse.com/thing:5975322</a></div></div>

Handles for M3 to M6 bolts and screws

vijaki, matice

Lolcio

To mark a center, or cross cut, you need to print, two pins.Pins should be printed with 100 infill.

Square, Center Scriber, Edge Marking Tool, Ruler

ravnila

Big-Daddy

Introducing a large 3 drawer storage system main unit is 227.5 mm tall, 204 mm wide, and 153 mm deep the 3 drawers inner diameter is 187mm wide and 161 mm deep lots of room for stuff. I added a frame bracket in the raw files just in case you want to print more than 1 and stack them like i did in the pictures. this model does not require any supports. Thanks for looking and happy printing.

Large 3 Drawer storage 

predali

tisanina

This STL model represents a detailed and realistic rose, ideal for 3D printing projects or visual representations that require a touch of naturalness and grace