modellbauer83

KoBuCRAFTS

Easy to print design, without any supports.&nbsp;Holder for tools with a max. diameter of 70mm, max. 40mm handle with&nbsp;Dimensions:<ul><li>Length: 150mm</li><li>With: inside 70mm / outside 80mm</li><li>Hight: inside 70mm / outside 80mm</li><li>Screw holes: 4mm, with countersink to 9mm</li></ul>Like this model? Please click on the purple BOOST button!&nbsp;You can allways scale the design to a bigger size.&nbsp;Only 105 grams of filament needed, very strong and smooth result!

Drill holder / Powertool holder / Cordless drill

Werkstatt Werkzeug 

TheBavarianModelMaker

<h4>Parts</h4><ul><li>2x printed mount</li><li>4x M5*12mm socket head screw</li><li>4x M5*10*6 hammer nut</li><li>1x M4*8mm button head screw</li></ul><h4>Instruction</h4><ul><li>Mount two brackets 115mm spaced onto the extrusion using M5 screw and nut </li><li>Slide the power supply into the brackets and align screw hole opposite to the fan</li><li>Use M4 screw to prevent sliding out</li></ul>

Genmitsu 3020 power supply mount

22LeoG93

Hey, this is an adaptation for a Square hydrometer and contains everything that could be needed related to silica in an ams (Except the Silica).

AMS Silica Dry Pods Wide & Narrow, Square Hygrometer, Desiccant Trays, and Funnel, Tree Support

3d drucker 

MihaiDesigns

3D printed AMS stacking stand. Fits the Bambu Lab AMS (for P1P and X1 series 3D printers)<a href="https://www.youtube.com/shorts/__9SEiFJhKI" rel="nofollow">Quick presentation video</a><h3>Compatibility</h3>Fits the 3 different versions of the AMS units. However, the fit for the older version (3 large gaps on the sides instead of 4) is slightly offset and the bottom box will protrude out a bit.<h3>Materials</h3><ul><li>about 500g of filament</li><li>optional 10x404mm metal rod/pipe (such as an aluminum pipe) cost me about $2 at the hardware store</li><li>optional two M3 grub screws 6-12mm long and compatible Allen (hex) key (you can find them in sets on Amazon for $10-20), OR use long normal M3 screws, like M3x30 or M3x40 and only screw in a quarter of the length</li><li>optional felt pads for the bottom AMS unit for easier sliding</li></ul><h3>Printing</h3>There's an optional small test-fit part (plate 3) that can be printed first for checking potential fitting issues.Pick either the decorated version (plate 1) or the plain version (plate 2). Takes close to 15 hours to print with the Generic PETG profile. <h3>Assembly</h3>Cut the metal rod to 404mm long, then insert it in both printed parts. Fit the AMS unit at the top. Screw in the two grub screws at the back alongside the rod to lock it in place. If you like CAD modeling, I posted a<a href="https://youtu.be/lQgtJk67J3Q" rel="nofollow"> 90-minute video with the entire workflow for creating this model</a>.

Werkstatt Werkzeug

cnc

3d drucker

Zum Drucken