I was watching Initial D and I wanted a replica of a mazda rx7 so i made one that isnt really that complicated to assemble. However I did change the model a bit for myself so that is why it looks different in the first image. Hope this does not affect your overall opinion on this model.



It is really easy to assemble, just be careful to not destroy the pieces when you try to get the out of the thing that keeps them in place!

mnvrman43

was inspired to make this model by a similar model that looked like a plane but i wanted to make a windspiner look like a bird so there you have it.



instructions:



I printed the support rod and wing shaft at 100% infill. The other parts I printed at 15%. I used Acetone to glue the shaft, spacers, and end caps. Since I did not use support material for the cardinal main body, I had to ream out the holes with drill bits

was inspired to make this model by a similar model that looked like a plane but i wanted to make a windspiner look like a bird so there you have it.

I was inspired to make this when i wanted to play football but at a much smaller scale so I made this. You can put it together using super glue or something similar.

Made a simple slingshot with an ergonomic handle, however you need to add a rubber thing for it to actually shoot but other than that it should be a great toy. Also make sure that no one is going to get hurt while playing with this.

Shout out to CATIAV5FTW for the design. I was intrigued by how a jet engine works and I think that many other people wonder the same thing so i have documented myself and made a jet design in fusion.However in my model you could not see inside so after a quick search i found this design that transforms the whole model into a section so you could see inside. I hope other I helped someone. And also make sure to remove all the supports after printing.

I perfected a model similar made by OrdSolutions and I resolved some issues with alignment, some weird seems and some other issues.

PLEASE SEPARATE THE PARTS BEAFORE PRINTING.And also please check the tolerance between pieces, you might have to adjust that.However it is a great learning model for those who want to see what a V6 engine looks like with most parts being separable so that you can see the inside of the engine.Also there might be some small mistakes with the model because most of the time when I made this was late at night so there is a small risk of some mistakes, but the overall engine works like it should.

When I first saw that off roader I tought it has a lot of free space in the back/trunk so I thought it would be funny to add a hot dog there:)

I was inspired by OrdSolutions to improve on my v8 engine model. I went ahead and improved some simple mistakes and made the model look a bit simpler. The model might need lubrication after you assemble it but other than that it should work just fine.Also you need some screws/glue for the non movable pieces.

Found a funny meme on instagram and thought i could make a model after that.That's all.

Made this coaster inspired by my playthrough of The Last Of Us.

I needed a quick design for a sponge holder for my sink and decided to post it here to. 

I made this low poly bonsai tree after I spent lots of hours in ghost of tsushima/watching some animes sooo yea I was pretty bored but I think it turned out okay.

Made this model when I was inspired by a DND sessions with my friends.Might need extra supports.

Made this little mushroom house because I was inspired by a real mushroom I saw on a small trip in the forest.You might have to add some supports and to make sure to modify the scale a bit if you do not like it.

I was inspired from another model that i made recently and wanted to make it better so I made this version of the model.

This model is not suitable for printing because it has lots and lots of  floating surfaces that cannot be supported by conventional supports.However it is a great learning model for those who want to see what a V6 engine looks like with most parts being separable so that you can see the inside of the engine.Also there might be some small mistakes with the model because most of the time when I made this was late at night so there is a small risk of some mistakes.

I made a simple medieval house inspired by many dnd sessions with my friends. However the print might need supports(the auto tree supports provided by bambu studio are fine).

Earn this badge when visit MakerWorld more than 20 days in last 30days UTC time