mmccoy30

SabreDesign

Midcentury planter with legs, available in two sizes with opening of 114 mm and 71 mm for a smaller pot. Leg section has a fairly tight fit so does not really need superglue but you can also glue it if desired.&nbsp;If you want to support me or get a commercial license you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/836490/2024-03-30_8c84c5e27142d.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/836490/2024-03-30_a24eef8052683.png"></figure>

Midcentury Planter

planters

snjames316

IntroI was tired of looking for a generic modular setup for Socket trays that you could swap sizes and completely customize on the fly when adding a new socket (or losing one). So I made a simple model and expanded it to fit any possible size(outside of oversized) and am self dubbing it the Gridfinity Universal Socket Trays (G.U.S.T). This setup was not build to maximize space, but instead to maximize visibility and simplicity by being able to reorganize at any point in time without the need to reprint everything. Enjoy rate and let me know if there are any issues not noted below. If you find you need a specific size I don&#39;t have in here, let me know. Lastly let me know if there are any improvements you would like to see made. &nbsp;Links to the full G.U.S.T. setsI don&#39;t usually like it when people put all their “check out my models here” but by (an unexpected) amount of demand, here are the links to ONLY the models related to the G.U.S.T. sets to help users navigate to the other sets directly online or in the app,&nbsp;<a target="_blank" href="https://makerworld.com/en/models/493996#profileId-407884" rel="nofollow noopener">Standard short sockets of 12-36mm diameter</a><a target="_blank" href="https://makerworld.com/en/models/495122#profileId-409200" rel="nofollow noopener">Deep sockets up to 68mm in height and 12-31mm in diameter</a> (Will be adding up to 39mm soon)<a target="_blank" href="https://makerworld.com/en/models/502884#profileId-418220" rel="nofollow noopener">the Deeper sockets up to 108mm in height and 12-39mm in diameter</a><a target="_blank" href="https://makerworld.com/en/models/495080#profileId-409150" rel="nofollow noopener">Label inserts for all three sets</a>&nbsp;Model Features<ul><li>These holders will fit any socket set since you measure your own sockets and print the appropriate tray pieces</li><li>The tray system is based on the Gridfinity standard and will fit all standard Gridfinity bases</li><li>on the bottom of the trays, I included the standard 6x2mm magnet inserts. This helps keep the tray from coming out of their spot in the grid if you slam your tool drawers like I do</li><li>Also, added the same magnet inserts on the socket tray to have a little holding power on the sockets themselves</li><li>The optional label system designed was made to be very simple. Doesn&#39;t require magnets, Stays secure even when slamming the tool drawers.</li><li>NO Guess work needed, when sizing out you entire socket collection</li><li>Got extra random sockets? Print one off socket trays for each one to store in the corner of your drawer</li><li>Labeled bottom to easily identify the right sized tray when printing several at one time</li><li> </li></ul>Instructions<ol><li>download and open the profile in Bambu studio  </li><li>Take note of the current socket height. If this height is taller than or equal to 108mm in length…..sorry. I didn&#39;t design a universal set for DEEEEEEEEEP sockets yet. If you have a set that is more than 108mm in height. leave me a comment or a message of what size your socket is and I&#39;ll start working on an addition to the sets.  </li><li>measure your Socket diameter (do not use the socket size printed on the socket as the size you use to select a tray) This set is 11-39mm diameter by up to 108mm in length <img class="image_resized" style="width: 16.5%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000502884/design/2024-06-19_ae731cfec37d2.jpg">  </li><li>round the diameter up to the nearest whole number (ex. like the above, anything between 17.01-18.00mm goes to 18mm)  </li><li>Add a new empty plate and select it <img class="image_resized" style="width: 27.19%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000502884/design/2024-06-19_88b1516efebf6.png">  </li><li>Right click on the model for the needed size (in this ex. its 18mm) and hit clone, it should clone to the selected empty plate <img class="image_resized" style="width: 26.06%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000502884/design/2024-06-19_dd40c5c6fe8ae.png"></li><li>&nbsp;Repeat for all socket sizes needed and then print. <img class="image_resized" style="width: 31.81%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000502884/design/2024-06-30_2125ac5de4f2a.png" width="903" height="721">  </li><li>go to my profile to find the <a target="_blank" href="https://makerworld.com/en/models/495080#profileId-409150" rel="nofollow noopener">Label inserts</a>, premade with many common sizes. linked below. Or just ignore the label part of this if you don&#39;t want to do it. (the labels make it look really nice and easy to read everything and return it to the right spot in an instant.)  <img class="image_resized" style="width: 45.18%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000502884/design/2024-06-19_4638d3fbeb1f.jpg"></li><li>For your sockets that are less than 68mm in length, go to <a target="_blank" href="https://makerworld.com/en/models/495122#profileId-409200" rel="nofollow noopener">this model</a> For your standard short sockets, go to <a target="_blank" href="https://makerworld.com/en/models/495080#profileId-409150" rel="nofollow noopener">this model</a></li></ol>IssuesIf a description is still below here, then I haven&#39;t fixed it yet. If you find any new issues, let me know in a comment or a message an I&#39;ll try and resolve it as soon as possible.

Gridfinity Universal Socket Tray 108mm Deep socket

gridfinity

JS DESIGN

Presenting my shower shelf. It&#39;s a simple design that is meant to be installed with Double side adhesive on the corner of the shower. There is 4 embosses for the adhesive to be installed and allows the right gap for the rigidifying lip that is all around the shelf. It also includes hooks for brush and accessories. The bottom of the shelf is made of diamond shaped holes allowing drainage while keeping structural stiffness.&nbsp;Hope you will enjoy it. &nbsp;Follow me for more!&nbsp;Other model from the same series here:<a target="_blank" href="https://makerworld.com/en/models/389802#profileId-290734" rel="nofollow noopener">ADJUSTABLE TOWEL HOLDER BAR - OVER CABINET DOOR by JS DESIGN - MakerWorld</a><img src="https://makerworld.bblmw.com/makerworld/draft/811475/2024-03-23_d2d619605104b.jpg">

Shower corner shelf with hooks

bathroom

dangles_

16oz Pop/Soda Can dispenser for use inside or outside your fridge. Holds eleven 16oz (tall boy) US sized cans and automatically pushes the next can to the front. Willing to make adjustments for other sized cans, just comment what you want and I'll make it happen. &nbsp;Dimensions: 420mm x 165mm x 162mm (LWH) 16.5in x 6.5in x 6.38in (LWH)

16oz Pop Can Dispenser

kitchen

michelem

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-04-23_b4afa61493a71.png"></figure>A VERSATILE EVERYDAY COMPANION&nbsp;Imagine having a versatile tool that effortlessly fits into your pocket, ready to tackle an array of tasks.&nbsp;Meet the SmartBits – a compact marvel that seamlessly combines multiple functions in a sleek design.&nbsp;This tool serves as both a screwdriver and a bit holder, providing easy access to 8 different bits for various applications.&nbsp;Activating the tool is a breeze – a simple slide on the exposed bar causes the bits to extend from the opposite end. The magnet effortlessly guides them back into position. Never forget it open.&nbsp;Thanks to the additional embedded magnets, each bit is securely held in place, ensuring they remain steadfast whether you&#39;re on the move or storing the SmartBits in your pocket.&nbsp;It&#39;s the ideal companion for your everyday needs, effortlessly blending convenience and functionality.&nbsp;Print Instructions:&nbsp;Support is required for both the Base and the Slider. Please verify the 3mf file with Bambu Studio if there&#39;s any uncertainty.&nbsp;Place the Slider with the magnet holes on the build plate and add regular support.&nbsp;Position the Base with the side opening on the build plate and add regular support.&nbsp;There is an alternative version of the base with flat bottom you can print with it on the build plate, but it requires support too.&nbsp;No support is needed for the Button and Lid.&nbsp;I recommend printing everything with a minimum resolution of 0.16mm.&nbsp;Bill of Materials (BOM):&nbsp;You&#39;ll need some magnets and a few screws:<ul><li>12 magnets, 5 or 6mm x 2mm</li><li>4 screws, M3 Socket Head, 8mm</li></ul>Assembly Instructions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-15_7862deb2dfe4.png"></figure>Start with the base and insert 2 magnets into the two rectangular holes; no glue is required there.&nbsp;Next, with a bit of glue, add 1 magnet to the Base in the slider housing. Be cautious, as this magnet is the only one that needs attention to its side, opposite to the one you put in the center hole of the slider (to be attracted).&nbsp;Now, take the Slider and glue 9 magnets on the bottom holes; again, the center one must have the same side as the magnet you put in the base slider housing.&nbsp;Insert the slider into the base, add the lid, and tighten the lid screws.&nbsp;Finally, attach the button to the slider with the last screw.&nbsp;If the slider doesn&#39;t return to its position, slightly loosen the screws.&nbsp;If you want I added also a cord endcap to be printed, look at the pictures, insert the paracord or similar in the bottom hole of the Endcap_Base make one simple knot on both ends, finally close it with the Endcap_Lid.&nbsp;Also, take a look at the <a target="_blank" href="https://makerworld.com/en/models/134027" rel="nofollow noopener">Magnetic Pocket Screwdriver</a> I crafted.&nbsp;Hope you like it!&nbsp;(Got inspired by the Bit Bar by Big Design)&nbsp;Check out my other magnetic tools for your office:&nbsp;<figure class="table" style="width: 94.97%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="text-align: center"><figure class="image image_resized" style="width: 49.2%"><a href="https://makerworld.com/en/models/146614" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-23_b0f041b578fc2.png"></a></figure></td><td style="text-align: center"><figure class="image image_resized" style="width: 50.26%"><a href="https://makerworld.com/en/models/143760" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-23_bf112a67f1d5b.png"></a></figure></td></tr></tbody></table></figure><ul><li><a target="_blank" href="https://makerworld.com/en/models/146614" rel="nofollow noopener">The magnetic cable clips</a></li><li><a target="_blank" href="https://makerworld.com/en/models/143760" rel="nofollow noopener">The magnetic ScrewGuard</a></li></ul>

SmartBits - Magnetic screwdriver bits holder

tools

DilsDT

Remote Control Holder

living-room

INVESTEGATE

I found this funny sign on the internet. Since there was no mmu version yet, I simply traced it and prepared it for multi-colour printing. This makes it possible to print the sign from top to bottom so that the prettier front side is on the print bed.&nbsp;The holographic H1H printing plates are particularly recommended.&nbsp;Where to buy cheap &amp; good print sheets: (Affiliate Links)Prusa MK3/MK4: <a target="_blank" href="https://s.click.aliexpress.com/e/_DllkNvN" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DllkNvN</a>Bambu: <a target="_blank" href="https://s.click.aliexpress.com/e/_DFuoF6J" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DFuoF6J</a>Bambu: <a target="_blank" href="https://s.click.aliexpress.com/e/_DDGlSbH" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DDGlSbH</a>&nbsp;&nbsp;

Everyone is a 3D printer Sign MMU AMS Multi Color

funny

Jorge Rui

After the release of the final version of the <a target="_blank" href="https://makerworld.com/en/models/469851#profileId-385684" rel="nofollow noopener">Ergo Mouse</a>, which breaks away from the original bamboo lab model&#39;s aesthetics as well as my previous designs, I&#39;m excited to introduce a more refined model featuring generative design. Though this version is merely inspired by automatic generation techniques, it allows for precise control of wall angles, reducing the need for extensive supports. Like the base &#34;Ergo Mouse&#34; model, this version doesn&#39;t require a flat base for printing. However, I recommend using <a target="_blank" href="https://shrsl.com/4ctbi" rel="nofollow noopener">standard or galaxy PLA</a>; Matte PLA tends to have more challenging supports to remove, which can leave marks on the piece. I hope you like it :)&nbsp;Affiliated links for Bambu Lab Material if you want to help a little:<ul><li><a target="_blank" href="https://shrsl.com/4k6e8" rel="nofollow noopener">Galaxy PLA</a></li><li>PLA CF</li><li><a target="_blank" href="https://shrsl.com/4ctbi" rel="nofollow noopener">Normal PLA</a></li></ul>and part of the success on getting the mouse without that flat bottom, and almost without any support scars is the use of Gold PEI build plate, this plate, don&#39;t know why, has a stronger grip when compared to the black one, and they have it for all printers.<ul><li><a target="_blank" href="https://shrsl.com/4jqpm" rel="nofollow noopener">Gold PEI Plate</a> </li></ul>&nbsp;You can get more information on the parent project <a target="_blank" href="https://makerworld.com/en/models/469851#profileId-385684" rel="nofollow noopener">Ergo Mouse</a>,Like the parent project, this mouse uses the <a target="_blank" href="https://shrsl.com/4cpnv" rel="nofollow noopener">wireless mouse kit from bambu lab</a><figure class="image image_resized" style="width: 49.48%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-30_36c3c434cfc4d.png"></figure><h2><a target="_blank" href="https://youtu.be/9TkudRs2iG8" rel="nofollow noopener">Video do assemble the Bambu Lab Wireless Mouse kit with this “skin”</a></h2><blockquote>A Message to you:Hello! I trust everyone is in good spirits.  I&#39;m contacting you because I&#39;m encountered increasing difficulties displaying my work on Facebook and, more so, on Reddit. Although I&#39;m utilizing this platform and others, I&#39;m seeking alternative methods to show my work.  A <a target="_blank" href="https://makerworld.com/en/@Kardes.Design" rel="nofollow noopener">community member</a> (<a target="_blank" href="https://makerworld.com/en/@Kardes.Design" rel="nofollow noopener">Kardes.Design</a>) suggested an abominations called &#34;TikTok&#34;, which I admit I&#39;ve previously attempted with limited success.  Nevertheless, I&#39;m willing to try again to share my development journey and updates. For TikTok users, you can find me at: <a href="www.tiktok.com/@designrepcom" rel="nofollow">www.tiktok.com/@designrepcom</a>.  Your support in sharing would be greatly valued. <a target="_blank" href="https://www.tiktok.com/@designrepcom/video/7375077366575516961?is_from_webapp=1&amp;sender_device=pc&amp;web_id=7374868727643145761" rel="nofollow noopener">And here a tiny clip for this project</a></blockquote><h2> </h2><h2>Context</h2>This mouse has been constructed in a completely different manner from previous versions, with a particular focus on functional and ergonomic aspects. Think of it as a study rather than the final product. Nevertheless, I have decided to release it for those interested in experimenting. What to expect:<ul><li>Optimal comfort level for a hand size within the 90th percentile, which includes most adult male hands.</li><li>Perfect button actuation. Given the button layout in this kit, as well as the limitations imposed by 3D printing, this will be the most suitable key configuration and should work with most printing configurations.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_ad7df10e8eacf.png"><figcaption>A little bit of the design process - Prototype creation (2th iteration on the make)</figcaption></figure><ul><li>I have included a version with specific material for support. Especially for those with an AMS system, this is one of the materials that should always be loaded.<ul><li>It is true that it is somewhat expensive, but if used only on the interface layer, this material will allow for many prints, as only a small amount is used on the contact zone. The advantage is an almost perfect interface zone. Bambu Lab currently offers &#34;<a target="_blank" href="https://shrsl.com/4ctb1" rel="nofollow noopener">Support for PLA</a>,&#34; which is a relatively elastic material with very low adhesion to the piece&#39;s walls. <a target="_blank" href="https://shrsl.com/4jh25" rel="nofollow noopener">PVA</a>, which is water-soluble, can also be used and allows for even superior results. Both are excellent options. The downside is that the printing will take much longer to complete, and the purging effect will consume some of the precious support material.</li></ul></li></ul><blockquote>You can also try using PETG as a support material. Since the melting temperatures of the two materials are similar, they are incompatible (they don&#39;t &#34;fuse&#34; together), which is beneficial for support structures. However, PVA or the specific support material allows for superior results, and in terms of configurations, everything is automated in Bambu Studio.</blockquote>&nbsp;This uses the <a target="_blank" href="https://shrsl.com/4cpnv" rel="nofollow noopener">wireless mouse kit from bambu lab</a><figure class="image image_resized" style="width: 326.094px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-25_94087291ff26c.png"></figure>&nbsp;This was the 1st study, so I will not be making the usual render images this time. Instead, I will share the print to show how clean it comes out. Still available to print, see instruction on the bottom (Ergo Mouse I1.3mf). <figure class="table"><table style="border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_8cd86a130ffdf.png"></figure></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_de1638e12ebd6.png"></figure></td></tr></tbody></table></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_111ea882c522d.png"></figure><blockquote>And since these things don&#39;t come out of nowhere, there is a whole development process needed to make everything go smoothly. Contrary to popular belief, it’s not enough to just know how to use a 3D modeling tool and slicing software; these are just tools in an industrial design process, which is itself part of product design. And you know what? It&#39;s something everyone should try. Simply printing pieces that others have made is just one part of the experience, a small part, not bad, but only a fraction of the experience, if you like to print you should try create something.So, I invite everyone to give it a try. Start by taking the first step: create a simple model using the CAD tool of your choice, or make a clay sculpture, or a model of what you want (I often start with these). What matters is to begin. You already have one thing mastered: printing. Now, just take one more step to become a creator.Jorge Rui</blockquote>&nbsp;

Ergo Mouse - Snake edition

computer 

Josh-3D

[Intro]I would like to introduce to you my fancy Scifi Box! Or crate? Treasure chest? Do I need to model some gold coins for you to fill this thing up with? Hehe.&nbsp;I wanted to produce a crate of sorts that'd be larger than the print volume, but assembled in a way that it didn't feel like it was just a model chopped up to fit into a printer's build volume. This is the results of those efforts. Part of my goal with this too was to make it easy to print, have cool styling, and have some sort of latch/locking mechanism (although it is primitive, it is still cool). For bonus points, I made it stackable!&nbsp;[What you'll need]&nbsp;<figure class="image image_resized" style="width:37.91%;"><img src="https://makerworld.bblmw.com/makerworld/draft/683999/2024-02-09_b6ff735a9db58.png"></figure>Tools:Hex Driver #3 & #2.5Drill bits for clearing out holesFile for cleaning up edges where berm is used, or whatever tool you like for that job.&nbsp;Hardware:16 M4 Nuts (Used for connecting the End Caps, Ends, And Mid section together. 8 M4x25 (Used to connect the Ends to the Mid section) 2 M4x30 (Used for the hinge) 2 M3x5 (Used on the Lock. You can Use M3x6 screws, but don't over tighten them, as it'll push through and show on the front) 14 M4x10 (6 for the Lock, and 8 are used to connect the End Caps to the Ends)&nbsp;Filament I used: (For reference! Use the colors you see fit!)Mid - Bambu PLA Iridium Gold MetallicEnds - Bambu PLA Matte CharcoalHardware - Bambu PLA Basic Bronze   [Getting ready to print]You're going to need about 2kg of filament for this case. It'll be about 1kg for the ends, and a little less for the mid/lid section. I modeled everything to be relatively easy to print, but they're still big full plate models, so make sure you've got things like warping under control (On the P1/X1 for example, turning off the aux fan!), that your bed is super clean, and yeah. These are big prints, so let's check ourselves before we wreck ourselves, because a failed print here can be costly.&nbsp;There is a little post processing that should be done with the models once they're off the build plate. Holes will need to be cleared for where the screws go, as I modeled a flat plane in place to help keep them clean. Additionally, on the lid, you'll want to make sure a screw can insert into the hole freely, and use a drill to clear it out if need be.&nbsp;[Assembly]Let's get to it, shall we? We'll start with the lid. Make sure a m4 sized screw will fit freely into the hole. We don't want it super loose, but we shouldn't have to screw it in. <figure class="image image_resized" style="width:55.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/683999/2024-02-10_c9999fe6e110c.png"></figure>Next, we'll assemble the lock mechanism. Two M3x5mm screws are used as stops for turning the lock. You can use 6mm length screws, but be careful not to put them in too far, as it'll push out and blemish the front surface of the lid. For everything else, use M4x10mm screws.<figure class="image image_resized" style="width:55.83%;"><img src="https://makerworld.bblmw.com/makerworld/draft/683999/2024-02-10_41aad9dca556f.png"></figure>Now it's time for the body.&nbsp;1. Clear out the holes using a drill, so the screw can pass freely through.  (Planes were modeled in to help support the screw holes during printing)2. Inset 8 M4 nuts on either side of the mid section into the slots. &nbsp;<figure class="image image_resized" style="width:55.28%;"><img src="https://makerworld.bblmw.com/makerworld/draft/683999/2024-02-10_f1141dd059fd4.png"></figure>(Keep in mind these drawings show the assembly of one side, but both sides should be done at the same time)3. Make sure you clear out the holes with a drill bit, like we did in Step 1 for the main body.4. Now, we'll use M4x25mm screws to attach the ends to the main body. Do this for both sides.5. For the hinge, we'll use a M4x30mm screw, or longer. These are just pushed in, and to hold them in completely, we'll insert a plug/dowl to help keep them in place. Before you put the screw/dowl in for the lid, position the lid in place (This step is not pictured!). Make sure you're happy with the fit of everything before you secure the lid, as once you get the screws and plugs/dowls in, it'll be difficult to remove them.<figure class="image image_resized" style="width:59.3%;"><img src="https://makerworld.bblmw.com/makerworld/draft/683999/2024-02-10_0b45c572681a.png"></figure>6. The lid should be installed at this point, with both ends installed. From here we'll attach the end caps. Firstly we'll insert 4 M4 nuts on each end.<figure class="image image_resized" style="width:58.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/683999/2024-02-10_e51dd47e5aea7.png"></figure>7. We'll use 4 M4x10mm screws on each side, screwed into the holes inset into the bigger holes! Once we have all of those in, we'll cover them up with the end plugs. The slot in the plugs is sized to work best with a coin. <figure class="image image_resized" style="width:60.06%;"><img src="https://makerworld.bblmw.com/makerworld/draft/683999/2024-02-10_35cdd6dea4d61.png"></figure>That's it! Enjoy!&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you're looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Scifi Crate

cool stuff

3D Print Masters Hub

Storage Bin Set with BasketAdded LIDs, small, medium large-Choose bin size small, medium, large and arrange basket to your liking.-Great for organizing misc hardware parts, batteries, screws, clips and more!-Easy print.-Scale down as needed.-Please like and subscribe! More to come!-See bio for more exclusive print project ideas.🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥

Storage Bin Set with Basket

workshop organizing 

Raulito3d

This is just a simple wall lamp with the brand logo of the printers that we love so much, and give a touch of glamor to the office.&nbsp;Just print, the lamp and the bottom, add a led stripe and enjoy.&nbsp;Greetings.