mkjep1990

T3rryX

This is a multi use accessory for the milwaukee m12 battery.&nbsp;It's a power tap to use the m12 batteries 12vdc power for other uses, mobile lighting, convert to USB as a powerbank, powerwheels or other purposes. all you have to do is take one of those blue insulated spade connectors, take off the blue plastic insulated part, insert and solder a wire (i used 16awg, but depending on the thickness of the wire insulation, you may need to experiment).&nbsp;It's also a cap for your battery, since the m12 doesnt have a power gauge unless you install it on a tool, i print these and (without adding the wire connectors) put them on my batteries when they're full, that way when i use it i obviously take the cap off, so if there's no cap i know the battery is partially or fully used, if there's a cap, i can be confident that the battery is fully charged without having to check.&nbsp;and lastly i put a screw hole in the center, this can be used with a #8 screw to secure to a wall to store the batteries, i wouldn't recommend this in something that sees a lot of movement like a van or truck, but i have used these to mount to my garage walls for years and they work just fine.

Milwaukee m12 battery power tap/cap/wall mount

Ellioto

This is a lowpoly chermander give me your feedback for improve thanks

Charmander LowPoly PiggyBank/Alcancia

iben

UniDuni3d

I&#39;m trying to improve my 3d modelling skills, and wanted to do something related to Mothers Love!&nbsp;If you print this with color change, please send your picture so I can update it! It would be REALLY CUTE!&nbsp;*I Improved the design as much as I could so it DOESN&#39;T NEED SUPPORT!&nbsp;*Please leave your suggestions!&nbsp;&nbsp;*Adicionado Urso somente com coração*Adicionado Urso com Coração escrito Mãe!

Knitted Bear with Heart Plush with Mom written

mothers day

Toria Jayne

Hi All, Well I have been a busy girl again.I would like to Introduce this simple and sleek shelf I have just created. It has been specially created for showcasing the charming ‘Gang of Worms’ 3D models available within the maker world.Designed with simplicity in mind, this slim worm shelf effortlessly accommodates each member of the ‘Gang of Worms’, providing a snug fit that highlights the intricate details of these fabulous cheeky 3D worm models. I just love that ‘Gang of Worms’ so much, I now use them for all my colour swatches of the filament I own, hence way I decided to create this shelf and it's perfect for me to go ahead now and fill the shelfs up with the whole gang and more!I've also made installation a breeze too for you, as I have designed the shelf with pre-designed screw holes, so no drilling required.Again, I thank you all so much and make sure to follow me on my 3D journey for future models of mine.Much Love, Toria x&nbsp;

Simple Light Wall Shelf To Display 'Gang of Worms' Models

gamer room

james.h.s.brown

UPDATE: Uploaded new versions - Daffodil now split into two parts (Flower &amp; Stem) for easier multicolour printing. Also provided a long stem version. Split version has a peg for connecting together - but will likely need some glue for a secure connection. Full details below A 3D scanned real Daffodil - ready for 3d printing Scanned a real world daffodil with a revopoint Pop3, then repaired the scan and thickened it in meshmixer and then printed on my P1P. I&#39;ve then done further work in meshmixer to split the model, add connector peg and make a longer stemed version. I&#39;ve painted the model in bambu studio in 2 colours - but looks great in one colour too. Pictured print printed in bambu PLA - yellow &amp; mistletoe green 4 model files attached: -Daffodil with short stem - the original scanned flower all as one solid part-Daffodil Flower split with peg &amp; Daffodil short stem split with peg - the original model but with the flower and stem split into separate parts. Connector peg added to help connect-Daffodil long stem split with peg - as above but with the stem extended to approx 20cm 2 Print profiles provided by me:-Solid Daffodil (short stem) - The original model, painted for ams with 2 colours. Print profile is printed at 0.2mm layer height, you can increase this if you&#39;d like higher quality but beware it significantly increases flushed filament if doing multicolour.-Split Daffodil (short and long stem) - 3 print plates. One has both the short and long stem options as seperate parts (select the one you want). The two other print plates have the flower as a separate part in two different orientations. The 1st (facing up) is easier to print but has a lot of support scarring on the back surface of the flower. The 2nd is difficult to print if you have poor adhesion, better quality overall but some support marks on the more visible front of the flower. I&#39;d recommend first option. As the parts are now seperate - much easier to print in different colours, which also mean I can decrease layer height to 0.12mm for better quality If you print the split model - part should hold together with just the peg (0.3mm tolerance on the hole) - but to be sure I&#39;d recommend a small amount of super glue between the two parts. Hope people like it, and as always, any feedback welcome. If popular I may scan some more daffodil&#39;s and other flowers. Sorry for the delay in uploading the new versions - I had to improve my meshmixer skills first! If you like this you might like to check out my other flower scan models here: <a target="_blank" href="https://makerworld.com/@james.h.s.brown/collections/1001900" rel="nofollow noopener">https://makerworld.com/@james.h.s.brown/collections/1001900</a>

Daffodil Flower & Stem (3d scanned real flower)

easter

Cake3d

I've uploaded wheels in 45mm and 50mm diameter, bearing takers and straight to axle type. I recommend 45mm for most anti frames but let me know if you would like other sizes added. I've also added a fusion 360 file which has a template for these wheels for you to play around with and help you learn fusion for creating your own custom wheels. It will show you lots of different methods to model parts including extrude, revolve, mirror, pattern, Chamfer, fillet, joints etc. Most feature parameters are editable in the 'Change Parameters' function, use this to change wheel size and tweak clearances depending on your (3d printer?) requirements.I recommend you first print a test wheel with like 2-3 walls and 10% infill, you can then make sure your bearings or axles fit ok. If they don't, don't blame me blame your printer. You can scale the part larger or small a minimal amount in the slicer or changing the parameters until everything fits perfect. Final printed wheels to be skated must be 100% infill like all skate parts should. For basic anti wheels like these I recommend concentric infill for the strongest parts. You will need to support the central hub for the bearing takers, straight to axle requires no supports. If this was useful or if you learned anything from it all I ask is you hit like and PLEASE upload photos of your makes, it means a lot to me to see this.This is for PERSONAL USE ONLY.

Basic Anti Rocker Grind Wheels for Aggressive Inline Skating Including Fusion 360 Template

havetraktor

Embrace Making

<figure class="media"><div data-oembed-url="https://youtu.be/KOtIbI5YBWI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/KOtIbI5YBWI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;This is the Bambu Lamps LED Spool. Made from a Bambu Labs reusable spool, this lamp can be illuminated with a smart RGB LED strip and connected to your home automation system to be remotely controlled. It makes a very nice looking desk lamp or conversation piece within your office or shop. &nbsp;Please note that the Bambu Labs spools come in both translucent frosted plastic (preferred) or solid white. From what I can tell there is no guarantee that you will receive one or the other when ordering specific Bambu Labs materials. Either one will work but the frosted one allows light to also shine through the spool which looks nice. &nbsp;You will need the following items to complete this assembly. As an Amazon associate I may earn a small commission (at no extra cost to you): &nbsp;3D printed files: ► YOU ARE HERE&nbsp;LED Strip - the exact one I used in the video is no longer available but this is almost exact substitute: ► <a target="_blank" href="https://amzn.to/48HHbZ9" rel="nofollow noopener">https://amzn.to/48HHbZ9</a>&nbsp;Thread forming screws: ► <a target="_blank" href="https://amzn.to/3RRCKEr" rel="nofollow noopener">https://amzn.to/3RRCKEr</a>&nbsp;3M Double sided tape: ► <a target="_blank" href="https://amzn.to/3TVDGdH" rel="nofollow noopener">https://amzn.to/3TVDGdH</a>&nbsp;Bambu Labs Reusable Spool: ► <a target="_blank" href="https://us.store.bambulab.com/products/bambu-reusable-spool" rel="nofollow noopener">https://us.store.bambulab.com/products/bambu-reusable-spool</a>&nbsp;I would suggest printing all of the covers (front and rear), plus the LED filament diffuser in white material so light can easily pass through. The stand, screw and the color accent parts can be made in any color of your liking. I chose white and grey as they match the Bambu Labs color scheme nicely. &nbsp;PLA materials works perfectly fine and the typical 3 walls, 3 floors and ceiling layers is fine at 0.2mm layer height. Only the stand will need support material in a few locations. The LED diffuser file can be printed in normal mode - or optionally should be able to print in spiral vase mode. It is only one wall layer anyways so the result is almost identical but spiral vase mode will result in no Z seam.&nbsp; **************************************************************************** &nbsp;If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here: ► <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y</a>&nbsp;By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can! Follow me on Instagram! &nbsp;► <a target="_blank" href="https://www.instagram.com/embracemaking/" rel="nofollow noopener">https://www.instagram.com/embracemaking/</a>&nbsp;

Bambu Lamps LED Spool

pusleplads

Hydrotatic

Five years ago, I faced a broken windshield washer cap in frigid Canadian weather. Frustrated with waiting for an OEM replacement, I designed my own.I've desinged a range of caps for various Ford vehicles. Tested on multiple models, they're designed for easy snap-in and snug rotation. Simply print in ABS or ASA, use supports, and you're good to go!Feel free to request custom designs based on your car's dimensions and photos. These caps have proven durability and enhance your engine bay. Make sure to check the compatibility list belowThe tab is there if you want to add a retainer, I would use a stainless steel wire and loop it around the container.I've included a blank one in case you want to add your own design.Tested Vehicles:<ul><li>Ford Focus ST</li><li>Ford Focus RS</li><li>Ford Focus</li><li>Ford Escape</li><li>Ford F150 - 2014</li></ul>Engines tested on 2.3L and 2.0L - It should fit on most but not tested yet:<ul><li>Ford Mustang 2.3 Ecoboost</li><li>Ford Maverick 2.0</li></ul>The ones that have not been tested yet, are the bigger engines, for the Mustang, SUVs, and Trucks.For any other fords with similar configurations, I'm expecting them to have used the same windshield washer fluid container.Printing: ABS or ASA recommended - I haven't tested any other material but PETG might withstand the heat in the engine.0.2mm height and use supports, print with the logo up.&nbsp;Added:<ul><li>Ford SVT - Not Tested</li><li>Cadillac - Not Tested</li></ul>&nbsp;

GuardCap - Windshield Wiper Fluid Cap Replacement

Ford

<figure class="media"><div data-oembed-url="https://youtu.be/UYlpkNepwJ4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/UYlpkNepwJ4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Video above will walk you through the assembly of my 3D printed snap latch drill bit case. This rugged Pelican style case only requires two different pieces of hardware and has been successfully snapping open and shut hundreds of times without failure. Bits are organized inside with a shelving system and do not mix when the case is tipped or shaken.&nbsp;If you are looking for the 99 piece drill bit set, take a look here: ► <a target="_blank" href="https://amzn.to/3CaHJcM" rel="nofollow noopener">https://amzn.to/3CaHJcM</a>&nbsp;Split pin sizes are 1/8" x 1-3/4" and 1/8" x 3/4"► <a target="_blank" href="https://amzn.to/3LJS1DV" rel="nofollow noopener">https://amzn.to/3LJS1DV</a> ► <a target="_blank" href="https://amzn.to/3dOSO9P" rel="nofollow noopener">https://amzn.to/3dOSO9P</a> ► <a target="_blank" href="https://amzn.to/3Scn25C" rel="nofollow noopener">https://amzn.to/3Scn25C</a>&nbsp;As an Amazon associate I may earn a small commission (at no extra cost to you). Print the top and bottom cases at 0.2mm layer resolution and 20% infill. Latches can be printed at 0.2mm layer and 25%… they will likely get calculated as solid anyways. PLA+ for all parts will work fine - can use PETG if you're worried about PLA cracking (has never happened to me)&nbsp;#3dprinting #tools #maker&nbsp;**************************************************************** &nbsp;If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here: ► <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y</a>&nbsp;By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can! Follow me on Instagram! ► <a target="_blank" href="https://www.instagram.com/embracemaking/" rel="nofollow noopener">https://www.instagram.com/embracemaking/</a>&nbsp;&nbsp;

Snap Latch Drill Bit Case

Tools

lindenaho

I was tired of the state of my hardware drawer, so I did something about it. These bins are thin and cheap to print. They don't hold up well to being moved around, but they support each other when they're all packed in a drawer. I have included various sizes that all work in a grid system. The main bin I started with is a 100mm x 75mm, Labeled 1x1. All bins are 50mm tall.&nbsp;All sizes include:0.5 x 1 - 50 x 750.5 x 2 - 50 x 1501 x 1 - 100 x 751 x 2 - 100 x 1502 x 1 - 200 x 752 x 2 - 200 x 1501 x 3 - 100 x 225&nbsp;You can always go in and tweak the size to fill in gaps that don't match perfectly with the grid.Hope you enjoy it, and happy printing.

Drawer Organization Bins

Toolbox at work

dogdad012

Just a Snoopy lightbox I made as a Christmas present. Print with face down on front panel, and normal on back cover.

Snoopy Lightbox

Lightbox

Onkelsam

simple 2d wall artEasy to attach with double-sided tape in your office oder as door sign!&nbsp;The second version is mirrored if you want the print bed surface as a visible side or if you hang the logo on a window

3D Printer Logo 

3d workshop

schiko

Support needed for the muzzle! I used 2 wall loops and 15% lightning infill.I also made a painted <a target="_blank" href="https://makerworld.com/de/models/15082" rel="nofollow noopener">cute Unicorn</a> and a <a target="_blank" href="https://makerworld.com/de/models/15080" rel="nofollow noopener">cute tiger</a> for your kids …&nbsp;I originally posted this model at <a target="_blank" href="https://www.printables.com/model/552536-low-poly-unicorn" rel="nofollow noopener">Printables</a>.&nbsp;UPDATE 2023-09-29:I added a version with rounded ears and horn (for safety of the kids).

Low Poly Unicorn

playday

ironspork

A 3x3 printable gridfinity insert that holds the basic X1C stuff.

Gridfinity Bambu X1C Basic tools

Gridfinity X1C

tiago.b.g.pereira

Makeup storage, easy to print, practical and useful&nbsp; printed on sunlu pla marble and sunlu pla wood&nbsp;I made a separate cover for the top to avoid supports&nbsp;I hope it is useful to someone, my wife loved it!!!&nbsp;&nbsp;

makeup storage

Bubu

Sakul

Revolutionize your workspace with these Brick Stackable Desk Boxes – where playfulness meets productivity! 🧱✨ Unleash your creativity and tidy up your desk simultaneously with these 5:1 Brick brick-inspired organizers. Available in 2x2 and 2x4 sizes, each Box comes complete with a built-in drawer for seamless storage of your office essentials. These bricks are not only five times the size of regular clamping Bricks but are also stackable, just like the iconic building blocks.Mix and match to create your personalized desk masterpiece! Elevate your organizational game and bring a touch of childhood nostalgia to your workspace. The Brick Stackable Desk Boxes – because work can be both efficient and fun!  If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you <a target="_blank" href="https://ko-fi.com/sakul" rel="nofollow noopener">“buy me a coffee”.</a>&nbsp;&nbsp;Check out my newest Uploads <figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139300/design/2024-06-04_fa3ccc46fa531.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139300/design/2024-05-01_5c7d04a643a0d.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>

Brick Stackable Desk Boxes

mbukhave

Corner shelf 200 x 200 mm. with 4 mm. screw holes and cover buttons.

Corner shelf 200 x 200 mm.

living

SkubOpMakrel

A simple mount for the most common Makita charger. Just remove the four rubber feet and press the charger down onto the pegs on the mount, simple as that. Can be mounted in all directions due to being press fit.&nbsp; Questions are welcome and please like, rate and share.

Makita charger wallmount

makita

Theranch46

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Eryone Black PLA Eryone Gray PLA BambuLab Matte Latte Brown PLA Eryone White Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Gray At layer #15 (1.28mm) swap to Latte Brown At layer #19 (1.6mm) swap to White for the rest.

One Piece Luffy

James 

stefaan.vandevelde.kortrijk

This poop shute can be screwed onto the back of the X1C printer. It has these advantages<ul><li>Sturdy</li><li>Doesn't take up a lot of space behind the printer</li><li>Printed without supports, glue the 2 halves together after printing</li><li>Has mounting holes to fix to the printer</li><li>Sufficent drop angle and widen enough so that the poop doesn't get stuck on the shute (so constipation-free :-) )</li><li>Collection system (not provided) is separate so that you can carry it to the dust bin without having to remove the whole poop shute</li></ul>

atv