mkilci1

Celestin

You&#39;re tired of seeing your desk cluttered with 3D printing debris or various waste!&nbsp;The solution is here: a trash can that attaches directly to your desk. Simply slide it on, and your waste will now be confined to one place.&nbsp;It&#39;s as simple as that: you print it and screw it onto your desk. It can be adapted to desks up to 3.5 cm thick. I&#39;ve added a piece of TPU to ensure better grip under constraint.&nbsp;I made 2 versions of my trash can, one large which you can see in the photos with a height of 160 mm, and another smaller one with a height of 115 mm, for those with less filament and who want to print faster. (The assembly remains the same.)&nbsp;And there you have it, problem solved! With its large capacity, you won&#39;t need to empty it every day; it can hold a lot for a long time.&nbsp;IMPORTANT NOTE: There may be a slight lack of grip for the trash can to hold well. To remedy this, you can apply a bit of hot glue on the top of the trash can that is in contact with the table.  After several tries, I found that the best solution was to put the trash can under constraint with the TPU. To do this, you screw the trash can normally to the table, then you remove it and tighten it a bit more. This way, when you put the trash can back in place, it will be well secured and will hardly move at all. Good impression!

Desk trash bin

Office

ATTV85

for 19mm strapmake from ABS or PET-G

Quick Release Buckle

animals

hardware 

emmaginn

<h2>Pebble Planter with Hidden Drip Tray</h2>The one in the photo was resized at 80%. I&#39;ve resized as low as 60% without any issues with the locking drip tray. Hope you like it!&nbsp;Commercial Licensing: <a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Patreons</a> also have the opportunity to use commercial licenses for their own creative projects, adding versatility and potential income streams.&nbsp;If you like this, please be sure to check out my <a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Patreon</a> where I upload many of my designs exclusively for members. Hope you like them!&nbsp;<figure class="image image_resized" style="width: 58.75%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000192389/design/2024-06-04_ca8fd50862ce2.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Alba Planter with Hidden Drip Tray</a>&nbsp;<figure class="image image_resized" style="width: 59.62%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000192389/design/2024-06-04_b0428e6109878.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Bamboo Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 57.27%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000192389/design/2024-05-06_43c269eba0e6.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Stacker Planter/Vase with Hidden Drip Tray</a>&nbsp;<figure class="image image_resized" style="width: 58.89%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000192389/design/2024-05-02_c4986346dbaf9.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Rivers Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 58.58%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000192389/design/2024-05-02_ac819f1c0e73c.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Slice Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 55.7%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000192389/design/2024-05-02_351443b9c636b.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Ripple Propagation Planter with Stand</a>

Pebble Planter with Hidden Drip Tray

Hone decor

KYZ Design

2 sizes!<ul><li>One to fit on P1/X1 printers diagonally</li><li>One to fit on the A1 mini diagonally</li></ul>Material<ul><li>Print in PLA if using indoors.</li><li>Print in ASA if using outdoors.</li></ul>Mounting<ul><li>These are sized to work with “small” and “medium” 3M Command Strips.</li><li>VHB tape will work well too (you can remove these cleanly with dental floss).</li><li>Gauge 6 screws will work too!</li></ul>That is all, happy printing!<h2>Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models and</h2><h2>check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my Gridfinity models.</h2>

HSW Under Desk Mount - Uses 3M Command Strips, VHB Tape or Screws - Honeycomb Storage Wall

ABDELat

All gridfinity basic bins, starting with 1x1x1 up to 6x6x12. Each file includes all heights from 0 (lid) to 12 (87.55 mm).&nbsp;These bins don&#39;t have magnet/screw holes. As long they are used for Drawers or non-moving places you don&#39;t need them.<ul><li>no labeling tab</li><li>labeling tab on the left side</li><li>labeling tab on the right side</li></ul>The generated 3mf-files are all based on this <a target="_blank" href="https://github.com/kennetek/gridfinity-rebuilt-openscad" rel="nofollow noopener">openSCAD rebuild</a>. I&#39;m using them a lot, they work as intended, easy to print.I&#39;ve include all printable profiles. The 6x6 version isn&#39;t currently printable, so there is no printable file. The 3MF-Version of each combination can also be downloaded in the raw-model-files tab.<h4>Bin Sizes in mm</h4>for all that don&#39;t want to calculate the sizes:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/760bc579-31a2-4876-9f86-9abd4176c954.png"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/44efbb41-6eed-494c-bd99-429ecba1642e.png">&nbsp;If you&#39;re looking for an easy to print grid, i recommend <a target="_blank" href="https://www.printables.com/model/430144-gridfinity-base-with-snap-connectors" rel="nofollow noopener">Gridfinity base with snap connectors</a>. If you have an Ikea ALEX drawer, <a target="_blank" href="https://makerworld.com/de/models/28581" rel="nofollow noopener">here you`ll get all needed parts (inkl. spacer)</a>.&nbsp;Other Tools used:All files are generated with the help of a modded version of <a target="_blank" href="https://github.com/OutwardBuckle/OpenSCAD-Bulk-Export" rel="nofollow noopener">OpenSCAD-Bulk-Export</a>. Check out this git if your interested in bulk-exporting from OpenSCAD&nbsp;Printing:Print it in any material you like. For most applications PLA is good enough. The slicer recommends a brim. With a bit of glue or the textured PEI sheet it doesn&#39;t move.The 6x6 can`t be printed in one piece! Use the Slicer to split it as you like.I´ve in also included print-profiles for all versions.&nbsp;Additional Tools and Helpers<ul><li><a target="_blank" href="https://makerworld.com/models/208796" rel="nofollow noopener">Gridfinity Height ruler - slim Edition</a>: Helps you to find the correct bin height.</li><li><a target="_blank" href="https://makerworld.com/en/models/476336" rel="nofollow noopener">AIO parametric Gridfinty Project</a>: Generate you own gridfinity bin.</li><li><a target="_blank" href="https://makerworld.com/en/models/28581" rel="nofollow noopener">Slim Gridfinity Base for Ikea Alex:</a> Perfectly fitting grid for Ikea Alex Drawer</li></ul>&nbsp;<h3>Parametric Model Maker</h3>I&#39;ve made a SCAD Version to work with the new <a target="_blank" href="https://makerworld.com/en/makerlab/parametricModelMaker" rel="nofollow noopener">Parametric Model Maker</a>. Just download the “Makerworld.scad” (from Raw Files) and use it there. In the Customize Section, you can change most parameters the get the desired Bin you want. Use the button right next to do Download or <a target="_blank" href="https://makerworld.com/en/makerlab/parametricModelMaker?designId=47599&amp;from=model_page&amp;scadUrl=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUSd2da6c53f14d3c%2Fmsfile%2F2024-04-16_1fd4308bde644.scad&amp;type=user" rel="nofollow noopener">use this link.</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/2024-05-10_09f49611aee0f.webp"><figcaption>Quick preview of the parametric model maker</figcaption></figure><h3>How to download the RAW files</h3>Since the last UI change the download option is a bit hidden. This is the current way to download the RAW files or the File for the <a target="_blank" href="https://makerworld.com/en/makerlab/parametricModelMaker" rel="nofollow noopener">Parametric Model Maker</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/2024-05-03_e07cda6ec065f.jpg"></figure><h3>Share your makes and support me</h3>If you like my work, give it a 🚀 boost 🚀 (the button is right below the Download). You can <a target="_blank" href="https://brickbank.app/support/" rel="nofollow noopener">support me here</a>, via <a target="_blank" href="https://ko-fi.com/brickbankapp" rel="nofollow noopener">Ko-Fi</a> or <a target="_blank" href="https://patreon.com/brickbankAPP" rel="nofollow noopener">Patreon</a>. Please leave a comment or share your makes 😁.  I appreciate your support! If your interested in selling the printed models DM me.&nbsp;Updates:2024-02-04: in the raw files section you can find premade zip-files wiht all generated boxes for each size, starting with 01x01x00 up to 12x12x12. This should help to create any box combination you like. Note: not all files can be printed as one piece! All zip files together are ~ 1.25GB i recommend to download them one by one!

Ultimate Gridfinity Bins Collection + Parametric

Gridfinity

franceschellifederico

Looking for a practical solution to label your cables? This 3D printable cable tag is your answer! Designed to provide a sleek and organized way to identify cables, this tag offers space to write names or labels, ensuring easy identification of cables in your setup.&nbsp;&nbsp;

Cable Tag

Organization

make 3D

The Perpetual Calendar&nbsp;A fully 3D printed calendar. No Magnets, no bolts, no glue and no screws are needed. Just 3D printed parts.  If you don't have an AMS unit, you can just print the date/month tiles in one color - Then you use a Posca Marker or similar to add the date and months.&nbsp;I seperated each color print (besides the date/months tiles) to individual print plates. Please move these around as you please for faster or more eficient prints.&nbsp;NB: When assembling the calendar please only tighten the axis so you can still move the date and month individually.&nbsp;The indicator tiles needs to be inserted in this order.<figure class="image image_resized" style="width:56.57%;"><img src="https://makerworld.bblmw.com/makerworld/draft/467143/2023-12-30_2ce15f6f96ba7.png"></figure>NOTE: The two housings are not the same.The centerblock one for the days is 31,4mm - The centerblock for the months is 28,8mm&nbsp;If you’re having issues with adhesion in general with your printer - please use the print profile with added brim to the threaded axis. &nbsp;Please have a look at this assembly video I've made. If you follow these steps it's a very simple assembly.<figure class="media"><div data-oembed-url="https://youtu.be/XVZG9G0sLQw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/XVZG9G0sLQw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>This video shows how to orient the date tiles so the calendar works as intended.<figure class="media"><div data-oembed-url="https://youtu.be/AJB0iBZT9bc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/AJB0iBZT9bc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Please make sure you print bed is clean when printing the multicolor parts to ensure maximum adhesion.&nbsp;Due to the nature of 3D printed parts being very light, you might encounter that the tiles won't fall down immediately. If this happens just give the housing a little tap and it should fall into place.&nbsp;My calendar is printed with these filaments:Sunlu PLA+ White (I am having bed adhesion issues with this filament - I recommend Bambu PLA White instead)Sunlu PLA+ BlackBambu Lab PLA Basic Orange UPDATE 31-12-2023:Uploaded a new print profile. Version V1.1Made a few modifications to the two housings so the tiles would fall down more consistently.This update also reduces the print time by more than 1 hour.&nbsp; UPDATE 08-01-2024:Some users have been complaining/leaving low ratings about the ironing of the tiles or bed adhesion.  Please modify this yourself within Bambu Studio if your printer is not well calibrated or maintained.  Also, make sure your printer bed is clean from any grease.  I've had zero issues with my own prints. both ironing and bed adhesion.  Printed on a P1S.&nbsp;&nbsp;

"Date Keeper" Perpetual Flip Calendar (Fully 3D printed)

Cool shit

Riccardo.Borto

Introducing the ultimate Pan Lid Organizer, a must-have accessory for every kitchen! This 3D model is designed to keep your pot and pan lids organized and easily accessible. With its user-friendly design, it's incredibly simple to print and install. Just use two screws or double-sided tape to securely attach it to your kitchen wall or cabinet door. No more searching for misplaced lids or dealing with cluttered countertops! The Pot Lid Holder comes in three different sizes to accommodate lids ranging from 16cm to 28cm in diameter, ensuring a perfect fit for your cookware collection. Experience the joy of a tidy kitchen and effortless lid storage.

Cabinet Door Pan Lid Organizer - Space Saver

Home Organization

xzVazx

<h2>Poo Emoji LightBox LED Lamp</h2>3D model of the Poo Emoji Lightbox art.&nbsp;Print Settings:<ul><li>No Support</li><li>No Brim</li></ul>Printed on Bambu Textured PEI Plate&nbsp;Materials & tools :<ul><li>SK6812 led strip</li><li>ESP32 with WLED to control the led strip</li><li>Hot Glue Gun</li></ul>&nbsp;

Poo Emoji LightBox LED Lamp

fun 💩

Fatalchaos25

Porsche wall art ther is a full 1 that just fits on the plate &nbsp; I've made another @ 250% but cut it into 4 parts so can be stuck on the wall so its bigger as you can see by the pictures&nbsp;enjoy

Porsche wall-art

for kids

chess

Makerillo

Create your own colour swatches in Bambu style. The four logo areas have a height of 1, 2, 3 and 4 layers. The dimensions are: 50x28 mm.&nbsp;Labelling can be done using 6 mm tape (TZe-211):<a target="_blank" href="https://store.brother.de/catalogs/brothergermany/verbrauchsmaterial/p-touch/schriftbaender/tze/tze211" rel="nofollow noopener">https://store.brother.de/catalogs/brothergermany/verbrauchsmaterial/p-touch/schriftbaender/tze/tze211</a>&nbsp;I made this box for storing this samples:<a target="_blank" href="https://makerworld.com/en/models/81017#profileId-86172" rel="nofollow noopener">https://makerworld.com/en/models/81017#profileId-86172</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239691/2023-12-02_d08b39eba0da1.jpg"></figure>&nbsp;&nbsp;

Filament Swatch Card

swatch that shit

<h3>Bees may have bestagons but humans still build rectangular walls. So here are the rectangular frame pieces!</h3>There are framed pieces for a few different sizes:<ul><li>The 12x9 System - recommended for X1 and P1 series printers - the middle pieces are 12 cells wide by 9 cells high. This makes the biggest pieces per print on a 256x256 bed with a filament cutter exclusion area (i.e. on a P1P/P1S/X1C without physically blocking out the filament cutter). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/16011" rel="nofollow noopener">here</a> and I also included this in the print profiles as it is my model (it's one of the first things I modelled and shared after getting my P1P!).</li></ul>&nbsp;<ul><li>The 12x10 System - recommended for the A1 - the middle pieces are 12 cells wide by 10 cells high. This makes the biggest pieces per print on a 256x256 bed without an exclusion area (i.e. on an A1 or a <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">tweaked</a> P1P/P1S/X1C). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/16011" rel="nofollow noopener">here</a> and I also included this in the print profiles as it is my model.</li></ul>&nbsp;<ul><li>The 8x7 system - recommended for the A1 Mini - the middle pieces are 8 cells wide by 7 cells high. These are designed to maximise the 180x180 bed of the Prusa Mini, and consequently will also maximise the bed of the A1 mini. The middle piece for this system can also be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator, rostap. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;<ul><li>The 10x10 system - the middle pieces are 10 cells wide by 10 cells high. These also fit on a 256x256 bed. This makes panels that have a more rectangular aspect ratio and less cells but you may have already started printing these. These may also better fit your wall space that you are trying to fill up due to the slightly different dimensions. The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;<ul><li>The 10x8 system - the middle pieces are 10 cells wide by 8 cells high. These max out a 220x220 bed (Ender 3 and Similar). The middle piece can be found <a target="_blank" href="https://makerworld.com/en/models/22521" rel="nofollow noopener">here</a>, uploaded by the OG creator, rostap. I did not include the middle piece here as rostap has modelled it first and uploaded it to his page.</li></ul>&nbsp;&nbsp;For those of you that want other sizes for other printer beds, remix is allowed! Or leave a request in a comment if you can wait :)&nbsp;If you need HSW help in general, check out the honeycombwall subreddit.&nbsp;<h3>Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models.</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/594876/2023-12-10_fde779d8f407b.jpg"></figure>

Framed HSW - Various Sizes - Honeycomb Storage Wall

Wall organizer HSW

giuliolibrando

<h2> </h2><h2>Bambu Lab Multi Filament Spool</h2><h3>Introduction</h3>A multi-filament drop-in replacement for the bambulab spool. You'll be able to insert up to 2 different filament in a single spool. Useful if you have samples or leftover on many spools.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/144843/2023-10-15_202221651d22e.png"></figure>&nbsp;It is also available a <a target="_blank" href="https://makerworld.com/it/models/41263" rel="nofollow noopener">4 Filament Spool Version here</a>&nbsp;<figure class="image image_resized" style="width:81.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/144843/2023-10-15_c697d56636e2.png"></figure><h2> </h2><h2>IMPORTANT: If you have a A1 Mini you must use <a target="_blank" href="https://makerworld.com/it/models/57025" rel="nofollow noopener">THIS ONE</a> instead.</h2><figure class="image image_resized" style="width:80%;"><img src="https://makerworld.bblmw.com/makerworld/draft/144843/2023-11-04_30616429d279d.png"></figure>&nbsp;<h2>What you'll need:</h2><h3>Filament Clip</h3>To stop the filament from unwinding you'll need <a target="_blank" href="https://makerworld.com/it/models/41154" rel="nofollow noopener">this filament clip</a>:<figure class="image image_resized" style="width:56.3%;"><img src="https://makerworld.bblmw.com/makerworld/draft/144843/2023-10-14_1622cbf74ed12.png"></figure><h3> </h3><h3>AMS PTFE Feeder Cap</h3>Optional but highly recommended to releaf the strain on the filament during spool movementsSuggested model:<ul><li><a target="_blank" href="https://www.printables.com/model/308399-bambu-ams-feeder-pfte-adapter-remix/files" rel="nofollow noopener">https://www.printables.com/model/308399-bambu-ams-feeder-pfte-adapter-remix/files</a></li></ul>The PFTE tube should be 80mm in lenght <figure class="image image_resized" style="width:56.34%;"><img src="https://makerworld.bblmw.com/makerworld/draft/144843/2023-10-15_9c7e78a5c1369.jpg"></figure>&nbsp;&nbsp;<h2>Assembly instructions</h2><ul><li>twist the bambulab spool to open it in half</li><li>align every spool disk as shown in the illustration, taking care to align the internal channels</li><li>insert the dovetail stoppers (the 2 trapezoid pieces) inside the channels</li><li>put together the bambulab spool and twist it back in position the 2 halves</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/144843/2023-10-15_f5c59b2a245a7.png"> &nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/144843/2023-10-14_840315b5910f3.jpg"></figure><h3> </h3><h2>Filament insertion</h2><ul><li>Straighten up the end of the filament </li><li>Fold at 90 degree angle the last 2-3 mm using a plier.</li><li>Put the curved filament in the hole </li><li>Start winding it mantaining tension on the spool for the first couple of turns</li></ul>&nbsp;