mizgamingpanda

hi_im_sean

Wall mount cat suspension bridge, for use with regular 550lb/4-6mm paracord. &nbsp;You should not need supports for any piece, print as oriented. Print very thick walls, PLA suggested to avoid warp. &nbsp;I highly suggest you screw at least 1 of the 3 landing screws into a stud (using a #6x2&#34; drywall screw), preferably the 2 in line and use a good drywall anchor for the 3rd. 8-9 rungs will span 1 set of 16&#34; studs, and it takes 17-18 rungs to span 2, or roughly 32&#34;. You can adjust the rung spacers height in slicer to fine tune the span distance. Find a pair of studs, mark them and test fit the assembled bridge before you drill any holes in your wall, adjust spacers and rungs as necessary. &nbsp;The drop rods snap into the rungs, refer to pictures for rope path. The bridge as pictured took about 1kg of filament, and 10ft of 4mm paracord.&nbsp;The cat step is designed to mount onto 1 stud and I do not suggest you use them at all with regular drywall anchors, maybe toggles on 5/8&#34; drywall, its your call depending on your chonker.

Household items